Flowmeters - Page 68

Manufacturer: BAYM Electric Co., Ltd Brand: BAYM Model: BM-1.5 Flowmeter

The modular designed can be used in conjunction with output module, sensor and remote transmitter. Good repeatability and strong stability, unique LCD (LCD)count, you can reset the 5 bit (9999.9) single oil volume, a cumulative total of 6 bits are not cleared. The accuracy ofthe positive and the negative is less than or equal to 1%the repeatability error of less than 2% units of measurement for (/L, /GAL /QTS a gallon, quart, pint (PTS)switch freely is the rise in domestic basic, easy to use), two keys (CALIBRATE DISPLAY) with the use of simple and easy to operate! NOTE: This meter can be normally use should meet two conditions: 1.work environment requires an oil pump or water pump above 0.1mA pressure 2.the working environment needs the flow above 10 liters per minute It can not be used to measure the small flow and water And it only can measure diesel oil,gasolene,carbinol and other liquid

Manufacturer: Flomec Flow Meters Brand: Flomec Flow Meters

Flomec rotor kit for use with G2 series industrial turbine flow meters. Brand Name|Flomec#MFR Part Number|125500-1#UNSPSC|41112501#Item|Rotor Kit#Suitable For Use With|G2 Series Industrial Turbine Flow Meters#Specifications|1/2 Inch#Includes|Rotor, Supports and Retaining Rings

Manufacturer: Blue-White Brand: Blue-White

F-300 series flow meters utilize a pitot tube pick up and a hard edged float design to provide a convenient and economic means of measuring water flow in a closed pipe system. The F-300 impact tube flow meter features a tough, one-piece machined acrylic meter body, corrosion resistant internal parts, and permanent screen-printed scale. You get all the strength and long service life required in most commercial and industrial applications. Flowmeters are installed after the filtration system in Commercial Pool applications. This enables the service persons, or Health Inspector to tell at a glance if the recirculating pump is pushing an adequate amount of water to ensure optimum water turnover (filtration).

Manufacturer: Racine Federated Brand: Hedland Model: H624-010

EZ-View Flow Meters For Water. 1/2 inch ports. EZ to install, in any position. Polysulfone bodies for standard applications. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 – 7MO stainless.

Manufacturer: CHESTERTON Brand: Chesterton

NEW CHESTERTON S50 2-50GPH WATER FLOW METER D537373

Manufacturer: Racine Federated Brand: Hedland Model: H624-007-R

EZ-View Flow Meters For Water. 1/2 inch ports. EZ to install, in any position. Radel R for more aggressive media. No special piping or flow straighteners needed. No electrical connections. Direct reading indication. Accuracy within 5 percent full scale. Relatively insensitive to shock and vibration. Materials: Polysulfone plastic body, piston and cone. Common parts are Spring: T300-series stainless, Indicator Ring: Buna N, Pressure Seals: Buna N, Fittings: C360 brass, Limit Indicators: Polypropylene, Retaining Ring: PH15 - 7MO stainless.

Manufacturer: Gems Sensors Brand: Gems Sensors Model: 155421

GEMS Sensors popularized the Rotor Flow's paddlewheel design by combining high visibility rotors with solid-state electronics that are packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation all with an unprecedented price/performance ratio. RFO Types feature a VDC pulsed output.

Manufacturer: PRM Brand: PRM Model: WM050SSVX

1/2" NPT 304 STAINLESS STEEL WATER METER; VITON SEALS Class: B Accuracy: Transitional Flow: ± 5% Nominal Flow: ± 2% Maximum Water Temperature: 104°F Maximum Water Pressure: 232 psi Mounting Orientation: Horizontal Materials: Body: 304 Stainless Steel, polyethylene Couplings: 304 Stainless Steel Measuring Chamber: Polyethylene Seal: Viton Mounting Orientation: Horizontal Not NSF certified

Manufacturer: Racine Federated Brand: Hedland Model: H620-604-R

EZ-View Flow Meters With Flow-Alert Flow Switch. Reed switch and latching models. Automatically signals alarm if flow is too high or too low. Models available for AC or DC power supply. Latching models include Hirschmann type electrical connector. Radel R for more aggressive media. Easy to install. Easy flow limit adjustment. Operates in any position. Relatively insensitive to shock and vibration. Repeatability within +/- 1 percent. Low cost. Materials: Radel R plastic body and cone, polysulfone piston. Common parts are T300-series stainless spring, Buna N indicator ring, Buna N pressure seals, C360 Brass fittings,polypropylene limit indicators, strontium ferrite magnet, PH15 - 7MO stainless retaining ring. Optional are Teflon coated spring and retaining ring. Fittings/threads: NPT ANSI/ASME B1.20.1, BSPT ISOR7.

Manufacturer: PIUSI USA Brand: PIUSI Model: 000710000

K44 Fluid Mechanical Meter 5-32 gpm, 4 digit partial totals (max 9999 litres), 7 digit totals. 0.2% Repeatability, Accuracy +/- 2%, Viscosity up to 30 cSt. Fluids: Diesel, Light oil. Max working pressure 142 psi. Burst pressure 400 psi. IN/OUT connection 1"NPT. Two direction flow. Weight 5 lbs.