Flowmeters - Page 64

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Select a valve-cartridge that matches your frame. Insert these needle valves into the flowmeter frames to control flow rate. Choose a 16-turn, high-resolution metering valve-cartridge for greater precision of flow rate. If your flowtube is in units other than mL/min, convert them to mL/min and choose a valve within that flow range from the table below. See website and virtual catalog page for more details. DELRIN-Reg TM E.I. DuPont de Nemours & Co. KEL-F-Reg TM 3M Co. VITON-Reg TM E. I. DuPont Elastomers L.L.C. Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.

Manufacturer: JGB Enterprises Brand: Universal Flow Monitors Model: IS-10 GPM-8-F-F

This flowmeter is made of materials that allow use in various levels of ultrapure water. The clear plastic tube is made from Polysulphone. The spring and shaft material are 316 Stainless steel. Seals are optionally Viton or Kalrez. End fittings are made from either 316 Stainless or PVDF. Insite-Inline Flow Meters made of see-through plastic with metal or plastic port adapters. You get to see your fluid as well as having all metal pipe connections. These are used for water, compressed air, dilute chemicals (such as those used in water treatment), and de-ionized water.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Flow switch for use with corrosive liquids such as mild acids Designed for pump control in various applications and pipe sizes - comes standard with multiple drag disks for expanded flow ranges Wetted surfaces of Noryl®, 316 Stainless Steel, EPDM Elastomeric Standard Continuous adjustment while operating Responds to flow only, independent of line pressure, temperature, or environment Particle contamination resistance is provided by a single convolute elastomeric seal which is continually flushed by working fluid flow

Manufacturer: COLE-PARMER Brand: Kobold

The device operates as follows: The flowing medium presses against the paddle for the flow switch. The paddle is fitted to one end of a balance arm which is in direct contact with a prestressed leaf spring. At the other end of the balance arm is a permanent magnet. This magnet actuates a reed contact located within a moveable housing outside the media. The reed contact switches on or off depending on the position of the permanent magnet and the switch housing. The status of the switch may then be used to electrically control the fluid flow. The moveable reed switch on the unit allows the contacts to be set either normally open (N/O) or normally closed (N/C). FEATURES Switch point adjustable Easy to install Brass or SS construction Maximum pressure: 1450/3600 PSI

Manufacturer: Cole-Parmer Brand: Cole-Parmer Model: AO-03216-55

The substitution of metal fittings with PTFE eliminates a potential contamination source for high-purity applications. The glass tube utilizes a fused ceramic scale for a precise, permanent measuring guide. In addition, a vertical-tangential locator line provides readings with hairline accuracy. Further improving readability is a front shield that magnifies the scale 16%. An anodized aluminum frame protects the heavy-walled glass flow tube; a white acrylic back plate protects and enhances viewing in the protective frame. Select a flowmeter with a valve for flow rate control. The standard valve is suitable where high resolution metering is not essential. The high precision valve features a fine-adjust 16-turn “non-rising stem” to more accurately set your desired flow rate. All flowmeters come with correlation data sheets for water and numerous gases (listed below) at standard temperature and pressure (STP). Designed for high-purity applications with flexibility for a broad array of gases Compact design is ideal for small panels or cramped workspaces High turndown—minimum flow rate is less than one-tenth of maximum flow High-precision valve option allows monitoring and control.

Manufacturer: Bel-Art Brand: SP Scienceware Model: 404010305

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H624-707/H526-008#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H624#Connection Size|1/2 Inch#Flow Rate|1 - 7 gpm#Pressure Rating|325 psi#Connection Type|NPTF Female#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|7-3/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 0.876 Specific Gravity Oil Media

Manufacturer: COLE-PARMER Brand: Brooks Instrument

Designed for rough-duty installations, a built-in guide rod stabilizes the float for easier reading. These are suitable for most general process fluids (brass reinforcing the connection does not come in contact with the fluid). Common applications are for RO systems, air-sampling skids and chemical feed systems in water treatment. A highly durable compact design Block body with brass-reinforced connections-virtually unbreakable Large scale on a flat surface is easy to read Many versions have dual time-unit scales

Manufacturer: Plast-O-Matic Brand: Plast-O-Matic Model: GX075V-PV Color: Dark Gray

Series GX flow indicators have a single clear acrylic cylinder wall and are used to indicate flow or clarity of ultra-pure liquids such as demineralized water. They may also be used with corrosive chemicals that are compatible with acrylic. Plast-O-Matic flow and level indicators are designed to indicate the presence or clarity of liquid in a piping system or to indicate level in a tank. They offer a maximum viewing area with a full 360 degree visibility for dependable observation and inspection from a reasonable distance. With the exception of the Series GX flow indicator, which can only be used for liquids compatible with acrylic, all Plast-OMatic indicators utilize double-wall construction. O-ring seals are used on Series GX indicators allowing them to seal at extremely low pressures as well as high pressures. GX flow indicators are full ported, eliminating any possible flow resistance. Standard fasteners are stainless steel. The transparent outer cylinder wall is high impact strength acrylic. Optional fluttering streamers are corrosion resistant thermoplastic. Made of PVC.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

science-lab-flowmeters