Water Quality & Instrumentation - Page 453

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7510

The Digital KU-2 Spindle is a replacement for the Digital KU-2 Stormer-Type Viscometer.

Manufacturer: Gems Sensors Brand: Gems Sensors Model: 142542

This is Rotor Flow in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or simply confirmed, by viewing the speed of the turning rotor. Either port may be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type Rotor Flow sensors are easy to see, easy to install and easy to afford.

Manufacturer: GEMU Brand: Gemu

GEMU 807-65-7-21-14-1-77-20000 FLOWMETER PVC, 2-20 m3/h DN 65

Manufacturer: Matheson Instrument Brand: Matheson Model: MT11E651T602 Color: Black

Meter body, 25 x 25 x 95 mm high, is transparent acrylic plastic block with aluminum support frame, mounted on acrylic base. Cylindrical, tapered bore contains ball Float. Metric scale is fused on face of block. Multi-tapered manual control Valve at Inlet has stainless steel stem and two buna-n O-Rings. Serrated chrome-plated Brass Inlet and Outlet connectors take 1/4 inch bore tubing. Accuracy: 5 percent of full scale; repeatability: 1 percent of scale reading. Maximum operating pressure 100 PSIG (690 kPa); maximum operating temperature 71°c.

Manufacturer: YSI Brand: YSI

The EcoSense EC30A Conductivity/TDS/Temperature Pen is a pen-style conductivity, total dissolved solids (TDS), and temperature tester with automatic temperature compensation, one- or two-point calibration, graphic LCD screen with onscreen instructions, and manual or auto-ranging for conductivity or TDS. It has a user-replaceable electrode, an electrode cap, a belt clip, and an IP67-rated waterproof case. The memory can store 50 data sets. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research. SpecificationsSpecifications Conductivity range 0.0μS to 19.90mS Conductivity resolution 0 to 1990 μS/cm, 5 μS/cm, 2.00 to 19.90 mS/cm, 0.05 mS/cm Conductivity accuracy + or - 1% Full Scale TDS range 0 mg/L to 10.00 g/L TDS resolution 0 to 1000 mg/L, 5 mg/L, 1.00 to 10.00 g/L, 0.05 g/L TDS accuracy + or - 1% Full Scale Temperature range 0.0 to 99.5 degrees C (32.0 to 212.0 degrees F) Power source Four LR44 alkaline batteries Data management features 50 data-set memory Weight (with batteries) 105g (3.7 ounces)   Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivit...

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors. Faster response and increased stability across a pH range of 0 to 14 Dome bulb offers better protection from breakage Stability in low-ionic strength solutions Offers resistance to Na+ ion interference Compatible with most brands of pH meters (that accept standard BNC connections)

Manufacturer: Unico Brand: Unico

PORTA-SPIN AC ADAPTER, 220 VOLT, EUROPEAN POWER CORD

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUU-50 uncalibrated viscometer has a 0.8 to 4.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.004 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUU-series size 50 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This uncalibrated viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUU-25 uncalibrated viscometer has a 0.5 to 2.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.002 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUU-series size 25 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This uncalibrated viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications...

Manufacturer: Datalogic Brand: Datalogic Model: 94ACC0061

Mounting Hardware Kit (for the Rhino 10)