Water Quality & Instrumentation - Page 456

Manufacturer: Varsal, Inc. Brand: Varsal Model: 450-39B-G10

Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: 160/400 newton meters. Percentage transmission: >80%@240 newton meters. Matching tolerance: within 0.3%@240 newton meters

Manufacturer: Cole-Parmer Brand: Cole-Parmer Model: AO-83301-16

Transmission over 80 percent at 200 nm standard-size cuvettes are the Type most often used for routine laboratory testing. Cuvettes include chemical resistant, PTFE covers. Cuvettes have two clear sides.

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The Hedland H201A-002 high pressure flow meter for petroleum fluids is an industrial class variable area flow meter designed to be used to measure the flow of petroleum and petroleum-based fluids. These low cost yet rugged in-line meter features high quality metal construction in anodized aluminum. Our flow meter has the easiest to read scale in its class. With bold easy to read numerals and gauge marks which virtually eliminate parallax problems associated with other flow meters.Direct readingEasy to Install360 deg rotatable guard/scaleEasier-to-read linear scaleNo flow straighteners or special piping requiredRelatively insensitive to shock and vibrationGood viscosity stability+/-2% full scale accuracy+/-1% repeatabilitySpecial scales availableCalibrated for 0.876 specific gravity. Brand Name|Hedland#MFR Part Number|H201A-002#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|H201A#Connection Size|1/4 Inch#Flow Rate|0.02 - 0.2 gpm#Pressure Rating|3500 psi#Connection Type|NPTF#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|-20 to 240 deg F#Dimensions|4.8 Inch Length x 1.68 Inch Width x 1.9 Inch Depth#Material|2024 - T351 Aluminum#Finish|Anodized#Standard/Approvals|ANSI B2.2#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For Petroleum Fluids

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The Hedland H200A-020 high pressure flow meter for petroleum fluids is an industrial class variable area flow meter designed to be used to measure the flow of petroleum and petroleum-based fluids. These low cost yet rugged in-line meter features high quality metal construction in anodized aluminum. Our flow meter has the easiest to read scale in its class. With bold easy to read numerals and gauge marks which virtually eliminate parallax problems associated with other flow meters.Direct readingEasy to Install360 deg rotatable guard/scaleEasier-to-read linear scaleNo flow straighteners or special piping requiredRelatively insensitive to shock and vibrationGood viscosity stability+/-2% full scale accuracy+/-1% repeatabilitySpecial scales availableCalibrated for 0.876 specific gravity. Brand Name|Hedland#MFR Part Number|H200A-020#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|H200A#Connection Size|SAE 6#Flow Rate|0.2 - 2 gpm#Pressure Rating|3500 psi#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|-20 to 240 deg F#Dimensions|4.8 Inch Length x 1.68 Inch Width x 1.9 Inch Depth#Material|2024 - T351 Aluminum#Finish|Anodized#Standard/Approvals|SAE J1926/1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For Petroleum Fluids

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The New LFM Series Flowmeters are made of injection molded, heat and chemically resistant polycarbonate bodies and fittings. Series LFM flowmeters have dual scales measuring in both GPM and LPM with 5% accuracy. A textured background on the body enhances scale readability. Standard in-line models come with 1/2" male NPT connections for LFMA, LFMB & LFMC; 3/4" male NPT connections for LFMD; 1" male NPT connections for LFME; and 2" male NPT connections for LFMF. Panel mount installation is available with 90° elbow fittings that include panel lock nuts. Various other fittings are available. CAUTION: Series LFM Flowmeters are for indoor use only or areas without direct sunlight. Polycarbonate is adversely affected by ultraviolet light.

Manufacturer: GPI Brand: GPI® The Proven Choice® Model: 126300-08

The GPI model 126300-08 is a MR 5-30-L8B Series Mechanical Fuel Meter. This Mechanical Fuel Meter is calibrated in liters with 1" BSPP inlet/outlet connection. It is C UL US Listed, and its flow range is 19 to 114 LPM. Its unique features are that it has a large, easy to read display and a turn knob to reset. It's to be used with Diesel, Gasohol (Gasoline/Ethanol blends - E10 maximum), Gasoline, and Kerosene. It has an aluminum housing, and its operating temperature is -20 to 125°F.

Manufacturer: COLE-PARMER Brand: GF Signet

Open-core design ensures accurate, linear output to ± 1% Step One: Choose a Flow Sensor Step Two: Choose an Installation Fitting Step Three: Choose a Flow Meter

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Manning CMVC-4 vacuum-calibrated viscometer has a 0.036 to 0.8 poise (P) viscosity measuring range and is suitable for the measurement of highly viscous materials such as asphalt at 140 degrees F. The CMVC-series size 4 viscometer uses a water bath (not included) for temperature-control testing, and a 300mm Hg vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This vacuum-calibrated viscometer meets the ASTM International D2171 standard for testing asphalt viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), International Standards Organization (...

Manufacturer: Dynasonics Ultrasonic Flow Meters Brand: Dynasonics Ultrasonic Flow Meters

Dynasonics 20 ft transit time cable for use with DXN series flow meters. Brand Name|Dynasonics#MFR Part Number|D005-2129-020#UNSPSC|41112501#Item|Transit Time Cable#Suitable For Use With|DXN Series Flow Meters#Specifications|20 ft

Manufacturer: DAVIS INSTRUMENTS Brand: Brooks Instrument Model: AO-32470-25

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' Inlet/Outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (32462-50 sold separately) which allows for mobility from Bench to Bench. Note: there are many additional types of acrylic flowmeters not listed here. Contact our application special its for quotes on acrylic meters with special requirements. Durable single-piece body withstands severe shock and vibration ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment flexible design allows for panel or Bench mounting.