Water Quality & Instrumentation - Page 505

Manufacturer: Unico Brand: Unico

UNICO Glass Cylindr, 100mm Pathlength; 14.1 ml Capacity, Visible Only, Each, S-90-308-50G is a reliable and dependable addition to the UNICO Spectrophotometers family of products

Manufacturer: COLE-PARMER Brand: Oakton Model: AO-35425-10

Great for water, wastewater, laboratory or plant use, these multiparameter testrs feature long-life pH electrodes with a wide range of sample compatibility. Pin-style conductivity sensors feature stainless steel electrodes for chemical resistance and durability. Replaceable sensor module saves you money by reusing the meter body. Advanced features include auto-shutoff, user-adjustable temperature coefficient, self-adjusting TDS and salinity factor, and low-battery indicator. The ultimate Tester for pH, conductivity, TDS, salinity and temperature! combine measurement capabilities of three testers in one convenient pocket-sized unit. Up to 5 point pH calibration with NIST or USA autobuffer recognition. Conductivity, TDS, and salinity feature Autoranging based on the concentration of your sample. IP67 - rated housing Floats If accidentally dropped in water.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: 1197X65EA

The Hanna Instruments HI 2002 series combination oxidation reduction potential (ORP)electrode measures dissolved oxygen in aqueous solutions to determine their contaminant levels and their ability to act as oxidizing or reducing agents, and it can be used in inline or immersion applications. The electrode's platinum band sensor is for use in oxidizing reactions (above 500mV) found in pools, spas, and municipal drinking water, and in other water testing applications. The electrode has a hex-shaped body with 1/2" National Pipe Taper (NPT) threads on one end for inline installation in a 1/2" standard pipe tee and 3/4" NPT threads on the other end for immersion installations in 3/4" threaded pipe. This combination electrode contains both the measuring half-cell and the reference half-cell to minimize electrostatic interference and provide consistent readings and has a double-junction reference to protect against silver wire contamination and to help prevent clogging when testing dirty water and solutions with heavy metals or organics. It has an annular polytetrafluroethylene (PTFE) junction that provides a prompt response and resists clogging when testing solutions with suspended solids. The electrode has a polyvinylidene fluoride (PVDF) body that resists solvents, acids, and bases, and is sealed and filled with an electrolyte polymer for minimal maintenance.It is 26.5mm in diameter and 124mm long, and it has a cable with a Bayonet Neill-Concelman (BNC) connector for attaching to meters with a BNC connection. It withstands temperatures from -5 to +80 degrees C (23 to 156 degrees F) and pressures up to 6 bar (87 psi). ORP electrodes, also known as redox electrodes, measure the ability of aqueous solutions to act as oxidizing or reducing agents, and they are commonly used in for water testing and food processing applications in hydroponics, aquaculture, and agriculture, among other applications. An electrode, also called a sensor or probe, is an instrument used with a meter to test and measure parameters of a substance...

Manufacturer: Varsal, Inc. Brand: Varsal Model: 450-334-I50

Varsal manufactures UV-VIS-NIR spectrophotometer cells and cuvettes, including micro-cells. Our unique fire-fused production technology assures long lasting, easy to clean, high performance cells. Varsal cells can be used with all commonly used spectrophotometers to measure absorbance or transmission and they comply with all international standards. Depending on the spectral range to be analyzed, Varsal spectrophotometer cells are available in optical glass, quartz and IR quartz glass. Our technical ability to produce cells that meet the demanding specifications of instrument manufacturers is only surpassed by Varsal's customer service and on-time delivery. Wavelength zone: 160/400 newton meters. Percentage transmission: >80%@240 newton meters. Matching tolerance: within 0.3%@240 newton meters

Manufacturer: Extech Brand: Extech Model: EC510

' pH/Conductivity Kit, Application Measures pH, Conductivity, Tds, Salinity, And Temperature, Features Flat Surface Ph Electrode, Waterproof, Contains All The Necessary Accessories, Includes Conductivity Calibration Standards, Ph Calibration Buffers, Weighted Base, Saple Cups With Caps, Four Cr2032 Batteries, Neckstrap, Heavy Duty Case, And Instructions, Manufacturers Warranty Length 1 Year Meter, 6 Months Electrodes '

Manufacturer: Cannon Instrument Brand: CANNON Instrument

For measurement of kinematic viscosity of transparent Newtonian liquids by suspended level principle as described in ASTM D 445 and D 446, and ISO 3104 and 3105. Similar to Cannon-Ubbelohde but less rugged n design. Provided with certificate of calibration and instruction sheet

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingSwivel brass fitting. Brand Name|Hedland#MFR Part Number|H625-716/H526-008-NO#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H625#Connection Size|3/4 Inch#Flow Rate|1 - 16 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|8-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 0.876 Specific Gravity Oil Media

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Virtually unbreakable Direct reading for use with air or water Easy to install-mount vertically in your system Simple disassembly/assembly for maintenance

Manufacturer: Milwaukee Instruments Brand: Milwaukee

Milwaukee Mi413 Free and Total High Range Chlorine Colorimeter, 192mm Length x 104mm Width x 52mm Height, 0.00 - 10.00 mg/L, 0.01/0.10 mg/L Resolution, LCD Display is designed keeping in mind the latest industry trends.

Manufacturer: Amprobe Brand: Amprobe Model: AM-240

The Amprobe AM-240 Autoranging Multimeter with Temperature Sensor has autoranging and manual controls for measuring temperature, current, voltage, capacitance, resistance, duty cycle, and frequency in HVAC and industrial electrical testing applications. The meter measures AC/DC current to 10 amps, AC/DC voltage to 600V, capacitance to 4,000 microfarads, resistance to 40 megaohms, duty cycle from 0.1 to 99.9 percent at frequencies lower than 10 kHz, and frequency to 10 MHz. A K-type thermocouple probe with banana plug measures temperature from -58 to 1,382 degrees F (-50 to 700 degrees C) with a resolution of one degree. The dual-display LCD screen shows current and voltage. Included test leads measure circuit voltage, capacitance, resistance, frequency, and duty cycle, and test for continuity and proper functioning of circuit diodes. The microamps measurement feature has a 0.1 microamp resolution at the 400 microamp range, and a 1 microamp resolution at the 4,000 microamp range for identifying small current changes. The maximum reading mode displays the highest measurement in a session, and an audible continuity buzzer confirms that a circuit is capable of conducting current. The data hold function keeps the desired reading on the display after disconnecting the probe. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, an auto power-off mode turns off the unit after 30 seconds of non-use to conserve battery life and can be disabled, and a low-battery indicator signals when the meter's batteries need to be replaced. A tilt stand holds the meter at an angle for reading. This average sensing, or average responding, meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform, such as standard induction motors and incandescent lights. The meter has a 4,000-count resolution, meaning that it can display up to 4,000 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnic...