|
|
-
4.5 of 5.0 with 10 Reviews
SALE PRICE: $75.77 8% OFF
Manufacturer: Troemner
Brand: Troemner
Manufacturer: Troemner
Brand: Troemner
Weight, Individual, Stainless Steel 200mg weight, stainless steel OIML style, calibrated to OIML Class F1. Weight is provided in a polypropylene case. Supplied with Troemner's NIST/NVLAP Weight Calibration Certificate. This listing is for Each _DELETE_
-
4.5 of 5.0 with 10 Reviews
SALE PRICE: $76.91 6% OFF
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Model: 11123102
Manufacturer: Mettler Toledo
Brand: Mettler Toledo
Model: 11123102
Perform safe routine testing of your balances with precisely what need - a METTLER TOLEDO CarePac with just two ASTM Class 1 100 gram and 5 gram test weights. This unique approach means you can rely on accurate measuring results and save time and money. CarePacs include ergonomic tweezers as well as clean - room approved gloves and cleaning cloths. Purchase an additional 3rd weight for customized testing such as determination of minimum weight.
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $79.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Angle Block Set now includes fitted Walnut Case. Furnished in 1° increments to 5 Degrees and in 5° increments to 30 Degrees. With the addition of the optional 1/4° and 1/2° Blocks, virtually any conceivable Angle to these increments Can be established. Simple, Quick Angle Set-ups. Eliminates calculations, avoids errors. Lightly Magnetized for better Holding. Manufactured of steel, Hardened, stabilized and ground. Sizes: 3" Long x 1/4" thick. Accuracy: +/-.0001" per inch. Oil-Hardened steel, Precision ground. Model No. 16120, Set of 10 Angle Blocks
-
4.5 of 5.0 with 45 Reviews
SALE PRICE: $80.04
Manufacturer: Fluke Corporation
Brand: Fluke
Model: HH290
Manufacturer: Fluke Corporation
Brand: Fluke
Model: HH290
Hanging hook for 190-Series II ScopeMeter instruments.
-
4.5 of 5.0 with 15 Reviews
SALE PRICE: $81.00
Manufacturer: Starrett
Brand: Starrett
Model: 234A-15
Manufacturer: Starrett
Brand: Starrett
Model: 234A-15
Starrett 234A-15 end measuring rod with insulated handle and spherical ends, 15 inch Length. Starrett 234 end measuring Rods or “standards†are for checking and setting micrometers of 2 inch capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.
-
4.5 of 5.0 with 36 Reviews
SALE PRICE: $84.65 14% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780291
Manufacturer: Ohaus
Brand: Ohaus
Model: 80780291
|
The Ohaus metric, stainless steel calibration weight meets International Organization of Legal Metrology (OIML) Class E2 specifications and designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets OIML R111 Class E2 specifications for use as a reference standard calibrating other weights, and calibrating high precision analytical balances with readabilities as low as 0.1mg to 0.01mg. The National Voluntary Laboratory Accreditation Program (NVLAP) accredits laboratories for compliance with ISO/IEC 17025 on the basis of their ability to meet the technical requirements set forth in NIST Handbook 150-2, and can provide accreditation to ANSI/NCSL Z540-1-1994. NVLAP calibrations and certifications meet all ISO, FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1 and Nuclear requirements and are traceable to NIST. Procedures and processes used to generate this multi-page certificate, as well as its format and content, are prescribed by NVLAP. The document contains customer name & address, date of calibration, equipment and standards used in the calibration, accuracy class, true mass value (mass in a vacuum), “As Found†mass correction (for recalibration), “As Left†mass correction, uncertainty of measurement process (uncertainty to tolerance ratios are guaranteed), environmental conditions during test, construction and density of the weight, calibration procedure, and a statement of traceability to NIST. Mutual recognition arrangements include The International Laboratory Accreditation Cooperation (ILAC), The Asia Pacific Laboratory Accreditation Cooperation (APLAC) and The National Cooperation for Laboratory Accreditation (NACLA). Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidel...
-
4.5 of 5.0 with 41 Reviews
SALE PRICE: $85.95 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614616-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 614616-531
|
The Mitutoyo grade 0 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks...
-
4.5 of 5.0 with 351 Reviews
SALE PRICE: $86.12 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-62 MAX
Color: Multicolored
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-62 MAX
Color: Multicolored
IP54 rated for water and dust resistance. Features. Withstands a 9.8 foot drop Test. temperature range 62 Max -22 to 932 Max -22 to 1202. adjustable emissivity. Hi and low alarms. dimension - 6.8 x 3.3 x 2.9 in.
-
4.5 of 5.0 with 1 Reviews
SALE PRICE: $86.84
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616303-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 616303-521
|
The Mitutoyo grade 00 square gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and...
-
4.5 of 5.0 with 18 Reviews
SALE PRICE: $87.56 13% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700TC2
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700TC2
Thermocouple mini-plug Kit (7 types). A kit of 7 mini plug connectors. Kit includes: type J (black)-2, type K (yellow)-2, type T (blue)-1, type E (purple)-1, type R/S (green)-1. 1 year warranty.
|
|