|
|
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $99.99
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9091/001
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9091/001
The set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 1.5m. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. BB120 Shielded banana to BNC adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $100.00
Manufacturer: Rice Lake
Brand: Rice Lake
Manufacturer: Rice Lake
Brand: Rice Lake
|
The Rice Lake U.S. customary (also referred to as English and avoirdupois), stainless steel, double-hooked test weight has a sliding hook that can be chained to other hooked weights or set flat, a density of 7.84, and is designed for use with hanging balances, and for applications including pressure, torque, and tensile strength testing. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The weight meets American Society for Testing and Materials (ASTM) E617, Class 6 specification for calibrating brass student weights.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Rice Lake Weighing Systems manufactures weight-related and process-control equipment for use in research, scient...
-
5.0 of 5.0 with 4 Reviews
SALE PRICE: $100.00
Manufacturer: Les Mills SMARTBARTM Weight Set
Brand: Les Mills SMARTBARTM Weight Set
Color: Black and Red
Manufacturer: Les Mills SMARTBARTM Weight Set
Brand: Les Mills SMARTBARTM Weight Set
Color: Black and Red
The superior design of SMARTBARTM weight plates means they're easy to grip, so you can hold up to two in each hand for the days you're feeling super human.... and you can easily drop that extra plate if you get too fatigued. The SMARTBARTM Weight Set includes the following: • 2 x 2.2lb (1kg) weight plates • 2 x 5.5lb (2.5kg) weight plates • 2 x 11lb (5kg) weight plates The SMARTBARTM Bar is not included in this set. Please refer to the link below to purchase the SMARTBARTM Bar to complete your Set. https://www.amazon.com/Les-Mills-SMARTBARTM-Bar-single/dp/B0157D98W0?ie=UTF8&*Version*=1&*entries*=0
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $100.13 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613671-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613671-521
|
The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calib...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $101.75
Manufacturer: Adam Equipment
Brand: Adam Equipment
Model: ASTM-2-1000
Color: Class 2
Manufacturer: Adam Equipment
Brand: Adam Equipment
Model: ASTM-2-1000
Color: Class 2
|
The Adams Equipment stainless steel calibration weight meets American Society for Testing and Materials (ASTM) specifications and is designed for calibrating other weights, or electronic balances and scales. The weight is constructed of stainless steel for stability, resistance to corrosion, and low magnetic susceptibility. The calibration weight is supplied with an impact-resistant polypropylene case. A choice of ASTM specifications provides a range of calibration precision.Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight. Science education products incorporate applied math and science principles into classroom projects. Teachers in pre-K, elementary, and secondary classrooms use science education kits and products alongside science, technology, engineering, and math (STEM) curriculum to demonstrate STEM concepts and real-world applications through hands-on activities. Science education projects include a broad range of activities, such as practical experiments in engineering, aeronautics, robotics, energy, chemistry, physics, biology, and geology.Adam Equipment manufactures balances, scales, and related accessories for laboratory, educational, industrial, retail, and medical applications. The company, which was founded in the United Kingdom in 1972 and has an office...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $104.67 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613210-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613210-521
|
The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $105.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611675-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 611675-521
|
The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)], and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)], and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measuremen...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $106.00
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0958
Manufacturer: ABS Import Tools Inc.
Brand: HHIP
Model: 3402-0958
Super Vee Block Set - USA | A unique and universal holding tool for small, miniature or intricate parts, used in conjunction with larger V-blocks | Furnished with bridges to straddle long workpieces, allowing top hold down screw of V-block clamp to be utilized | Hardened and high-precision ground | With fitted case | Includes 2 V-blocks: 0.030~ .156" & .050~ .281" capacity , 2 bridges and 5 upper prisms: 1/8, 5/32 & 3/16" capacity
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $106.73 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613193-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613193-521
|
The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $108.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613195-521
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613195-521
|
The Mitutoyo grade 00 rectangular gage block is made of ceramic, has its nominal length engraved in inches, is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of ceramic, which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the m...
|
|