Calibration - Page 122

Manufacturer: Fluke Calibration Brand: Fluke Model: 9171-INSF

This inserts are ordered with 9171 Series Metrology Well Calibrators accommodating a variety of metric- and imperial-sized probe diameters.

Manufacturer: VERMONT GAGE Brand: Vermont Gage

Marked with size and direction of tolerance on gages over .060". Within .0001" round. Material: 52100 tool steel Hardness: Rc 60 - 62 Length: 2" Finish: 10µ" or better Certificate of Accuracy included.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540624

Fluke voltage test probe for 1760 3 phase power quality recorder. Range Rms: 1 V to 170 V. Vnom: 100 V. Maximum continue: 1000 V. Fast transient range: Vp less than 1ms: 6000. Intrinsic error: greater than 0.15 percent. Operating voltage: 600 V CAT IV.

Manufacturer: ABS Import Tools Brand: HHIP

1.001 to 1.009 by .001mm ~ 1.01 to 1.49 by .01mm ~ .05 to 9.5 by .5mm ~ 10 to 100 by 25 mm

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-9

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 832.0" H2O Range.

Manufacturer: Fluke Corporation Brand: Fluke Model: 28II Color: Multicolored

The Fluke 28II Rugged Industrial Multimeter defines a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The 28II meter has an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15-Degree C to +55-Degree C (5-Degree F to 131-Degree F, -40-Degree C for up to 20 minutes) and 95-Percent humidity, and have been designed and tested to withstand a 3 m (10 ft.) drop. The Fluke 28II multimeter is built to work in the toughest environments. Measures up to 1000 V ac and dc, measures up to 10 A (20 A for 30 seconds), has a 10,000 μF capacitance range and a frequency to 200 kHz. Features an extended ac voltage bandwidth of 15 Hz to 20 kHz. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. The multimeter is designed to perform resistance, continuity and diode tests and has a min/max and average recording to capture variations automatically. Features a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. The 28II’s hi resolution 20,000 count display mode allows for more accuracy. Backlit keypad buttons allow for easy visibility in lowlit areas while large display digits and 2 level bright white backlight increase visibility.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3345753

Fluke 1 phase mini current clamp set for power quality logger. 1A/10A Current.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-148

Manufacturer: Fluke Corporation Brand: Fluke Model: I5S

Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5A AC current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers. Compact shape makes transporting and storing convenient. Take accurate readings without breaking the circuit. CAT III 600 V (For insulated conductors only). Nominal current range: 5A. Continuous current range: 10mA to 6A. Maximum non-destructive current: 70A. Lowest measurable current: 10mA. Basic accuracy: 10mA to 1A: 1 percent + 5 mA, 1A to 5A: 1 percent. Useable frequency: 40 Hz to 5 kHz. Output levels: 400 mV/A. Input load impedance: greater than 1 mega ohm in parallel with up to 47 pF. Crest factor: less than or equal to 3, add 0.7 percent to accuracy. Safety: CAT III 600V per IEC/EN61010-1, Pollution Degree 2. Maximum voltage: 600V AC. Maximum conductor diameter: 15mm. Output cable length: 2.5m. With BNC adapter. Measures 116mm length by 43mm width by 23mm height.

Manufacturer: LK Industries Brand: L-K Industries Model: A12-2

Mini-melton: the mini-melton is a smaller version of the classic melton centrifuge. Its compact and light weight design is ideal for field use where permanent vehicle installation may not be a suitable option. This unit is also perfect for applications in which small non-heated samples are frequently in Test.