|
|
-
4.5 of 5.0 with 23 Reviews
SALE PRICE: $1,220.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-300
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 177-300
-
4.5 of 5.0 with 1 Reviews
SALE PRICE: $1,511.51
Manufacturer: Starrett
Brand: Starrett
Model: 82221
Manufacturer: Starrett
Brand: Starrett
Model: 82221
-
4.5 of 5.0 with 45 Reviews
SALE PRICE: $1,595.00 1% OFF
Manufacturer: Ametek
Brand: Ametek
Model: ETC400A115B21EX
Manufacturer: Ametek
Brand: Ametek
Model: ETC400A115B21EX
|
Ametek dry block calibrator is designed for tests and verifications of temperature sensing devices in the field. This instrument is ideal when time is a critical factor and the highest accuracy is not a requirement. Reduced size and weight are important considerations as the unit may fit into a toolbox or instrument carrying case, and can be used for sensors that are difficult to access. The ETC calibrator heats up by up to 100 degree C per minute and completes a full dual-point test in less than 10 minutes, including stability time. One-key-one-function user interface provides immediate access to setting the temperature and the auto-step timesaving function. The stability indicator provides audible and visual prompts when the temperature is stable. This function also includes a 3-minute countdown before the stable condition. Stainless steel and rubber side panels make the instrument suitable for many years of faithful duty in an industrial environment. Multi-hole well design. RS232 and Jofra calibration software. Multi information display. Auto stepping. Stability indicator. Count down timer. Programmable maximum temperature. Fast simulation/training mode. Re-calibration from keyboard. The multi-information display shows actual and set temperatures, a stability indicator, and a stability countdown timer. Power supply: 115 VAC.
-
4.5 of 5.0 with 22 Reviews
SALE PRICE: $1,645.05
Manufacturer: Starrett
Brand: Starrett
Model: 81569
Manufacturer: Starrett
Brand: Starrett
Model: 81569
Angle plates provide a convenient and practical means of clamping and holding work in a vertical position. Their excellent finish and flatness make them very compatible for use with granite surface plate accuracies. The angle plates are available with either 2 or 4 finished faces. The 2-face angle plate has the bottom and the adjacent square face finished flat and square to one another.
-
4.5 of 5.0 with 24 Reviews
SALE PRICE: $1,936.81 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 53-685-082-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 53-685-082-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
4.5 of 5.0 with 48 Reviews
SALE PRICE: $2,662.69
Manufacturer: Starrett
Brand: Starrett
Model: 81574
Manufacturer: Starrett
Brand: Starrett
Model: 81574
Angle plates provide a convenient and practical means of clamping and holding work in a vertical position. Their excellent finish and flatness make them very compatible for use with granite surface plate accuracies. The angle plates are available with either 2 or 4 finished faces. The 2-face angle plate has the bottom and the adjacent square face finished flat and square to one another.
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $2,749.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-725 US
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-725 US
|
The multifunction process calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters. Support flow meter testing with frequency and CPM functions. Perform fast linearity tests with auto- step and auto-ramp features. Power transmitters during test using loop supply with simultaneous mA measurement. Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms. Store frequently used test setups for later use. Backlight lets you work in poor light. Large battery capacity of four AA cells. Battery door for easy changes. Voltage range: 0 to 100 mV, 0 to 10V (source), 0 to 30V (measure); voltage resolution - 0.01 mV, 0.01V, 0.01V; voltage accuracy - 0.02 percent Rdg + 2 LSD. Notes Max load, 1 mA. mA: 0 to 24 range, 0.001 mA resolution, .02 percent Rdg + 2 LSD accuracy. Notes max load, 1000 ohm. mV (TC terminals): -10.00 mV to 75.00 mV range, .01 mV resolution, .025 percent of range + 1 LSD accuracy. Resistance: 15 to 3200 ohm range, 0.01 to 0.1 ohm resolution, 0.10 to 1.0 ohm. Frequency range: 2.0 to 1000.0 CPM, 1 to 1000 Hz, 1.0 to 10.0 kHz; Frequency resolution - 0.1 CPM, 1 Hz, 0.1 kHz; Frequency accuracy - +/-.05 percent, +/-.05 percent, +/-.25 percent. For frequency source, waveform is 5V p-p squarewave, -0.1V offset. Loop Supply: 24V dc range, 10 percent accuracy. 30V maximum voltage. -40 to 71 degree C storage temperature. -10 to 55 degree C operating temperature. Relative humidity: 95 percent (10 to 35 degree C), 75 percent (30 to 40 degree C), 45 percent (40 to 50 degree C), 35 percent (50 to 55 degree C). Shock: 30g, 11ms, half-sine shock (or 1meter drop test). Vibration: random, 2g, 5-500 Hz. safety: CSA C22.2 No. 1010.1:1992. Battery: Four AA alkaline batteries. Battery life: 25 hours typical. Three years warranty.
-
4.5 of 5.0 with 3 Reviews
SALE PRICE: $5,032.86 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 80885
Manufacturer: Starrett
Brand: Starrett
Model: 80885
Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.
-
4.4 of 5.0 with 11 Reviews
SALE PRICE: $4.10 3% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Individual Precision Grade Gage Ball Size: 1.000 (1). Chrome Steel Hardened To 63RC, Ground and Lapped Certified to Grade 25 Accuracy°.0001" dia.,000025" sphericity* Inch and metric sizes available.
-
4.4 of 5.0 with 77 Reviews
SALE PRICE: $9.99 2% OFF
Manufacturer: BestDealUSA
Brand: Neewer
Manufacturer: BestDealUSA
Brand: Neewer
This 100g scale weight is made of high quality stainless steel, it is ideal for those mini digital scales with 100g full capacity. Features: Made of stainless steel, it won't get rusted. Elaborate made and defect free. Shiny and elegant appearance. 100g gram calibration weight for digital pocket scale, jewelry carat scale, diamond scale, precision balance test. Specifications: Quantity: 6 PCS ( 50g*1, 20g*2, 10g*1, 5g*1 ) Total weight: 105g ( 50g+ 20g+20g+ 10g+ 5g=105g ) Material: steel with smooth chrome finish Color: Silver Package included: 1x 100g scale weights 1x PE bag
|
|