Calibration - Page 266

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611204-521

The Mitutoyo grade 00 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industri...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614681-541

The Mitutoyo grade AS-1 square gage block is made of steel, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. The grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 24.1 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 612191-531

The Mitutoyo grade 0 rectangular wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611580-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: Gasco Brand: Gasco

Calibration Gas, Gas Name Hydrogen Sulfide, Nitrogen, Gas Mixture 200 ppm Hydrogen Sulfide, N2, Background Gas Nitrogen, Cylinder Cylinder 66L, Cylinder Material Aluminum Alloy, For Use With Any and All OEM Gas Detectors, Connection Size C-10, Max. Pressure 1200 psi, Cylinder Dia. 2-9/10 In., Cylinder Height 10-1/2 In., Accuracy +/-5 Percent, Calibration Certificate NIST Technical Specification Item Calibration Gas Gas Name Hydrogen Sulfide, Nitrogen Gas Mixture 200 ppm Hydrogen Sulfide, N2 Background Gas Nitrogen Cylinder Cylinder 66L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 1200 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST

Manufacturer: Gasco Brand: Gasco

Technical Specification Item Calibration Gas Gas Name Sulfur Dioxide, Nitrogen Gas Mixture 25 PPM Sulfur Dioxide, Balance Nitrogen Background Gas Nitrogen Cylinder Capacity 66L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 1200 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST This listing is for each.

Manufacturer: Mitutoyo Brand: Mitutoyo

MIC HEAD .500 S/LOCK

Manufacturer: YUSHI INSTRUMENTS Brand: YUSHI INSTRUMENTS Model: B1010033

YUSHI INSTRUMENTS：We Are Manufacturer 20 years NDT experience,ISO, CE & RoHS certificated, this is how we keep superior quality and competitive offers for global valued customers

Manufacturer: Meriam Process Technologies Brand: Meriam Model: Z9A84

Thermocouple calibrator wiring kit. Pack of 1.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-749 includes two mild steel blocks and one clamp. Mild steel provides strength and durability, and the blocks feature squareness for increased usability, accuracy, and measurement consistency. All surfaces except the “V” are square and parallel with each other within .002”. V-grooves are square and parallel with all surfaces within .0035”. Dimensions are 1-1/2” (38 mm) square x 2” (50 mm) long. Work capacity is approximately 1-1/2” (40 mm) diameter. V-blocks are small part work holders. They are held in place with the assistance of a clamp. The grove allows a channel for the clamp to hold down the part being measured or modified. Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metrology hand tools. The Brown & Sharpe line of coordinate measuring machines (CMMs), optical measuring systems, benchtop measuring machines, and precision hand tools offer consistent, high-quality design, construction, and performance. Brown & Sharpe has manufacturing facilities in North America, Switzerland, and China.