Calibration - Page 269

Manufacturer: Fluke Calibration Brand: Fluke Model: 3103-4

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Anyload Brand: Anyload Model: 108DA-500KG,1,1.5,2t

Load Cell for Scales.

Manufacturer: Checkline Brand: Checkline

Checkline TBKC-D Type D Test Block Kit with NIST traceable certificate To obtain accurate readings using a durometer, one must develop the proper "feel" for the gauge. Check-line's Durometer Test Block Kits gives the user the ability to develop the proper "feel", and, while they are not to be used for calibration purposes, they enable the user to perform a quick check for proper durometer operation. A large variation would indicate the need for recalibration of the durometer being utilized. This should be done in accordance with the methods indicated in ASTM D-2240. The kit consists of color coded test blocks each of which measures 1/4" x 2" x 2". The kit is supplied in a sturdy foam-fitted carrying case with the true readings for each block on the inside cover of the case and a NIST traceable certificate conformance.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-291

Mitutoyo Setting Ring, Size: 1.600" ID, Thickness: .590", Accuracy: ± .00004"

Manufacturer: ABS Import Tools Brand: HHIP

SUPPLIED IN MATCHED PAIR | Holds cylindrical workpieces for grinding. | 90° Vee blocks. | Precision ground flat, square and parallel to 0.0005". | Switch on/off.

Manufacturer: Phase II Plus Brand: Phase II Plus Model: PHT1300-05

Phase II PHT1300-05 Double Sided Leeb "D" Test Block

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-63TCAL

The Fluke 63 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -32 to +535 degrees C (-25 to +999 degrees F) with accuracy that varies from + or - 1 degree C to + or - 3 degrees C depending on the temperature range. It has a 12:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It can display the current temperature and the maximum temperature for comparison during process monitoring. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The CE mark indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-32 to +535 degrees C (-25 to +999 degrees F)Infrared sensor accuracy-32 to -26 degrees C (-25 to -15 degrees F): + or - 3 degrees C (+ or - 5 degrees F); -26 to -18 degrees C (-15 to 0 degrees F): + or - 2.5 degrees C (+ or - 4 degrees F); -18 to +23 degrees C (-0 to 73 degrees F): + or - 2 degrees C (+ or - 3 degrees F); For targets above 23 degrees C (73 degrees F): + or - 1% of reading or + or - 1 degrees C (+ or - 2 degrees F), whichever is greaterDisplay resolution2 degrees C / 5 degrees FDistance-to-spot ratio12:1Power Supply9V or NiCd batteryWeight320g/11oz.Dimensions200 x 55 x 160mm / 8 x 2 x 6 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focus...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-530

Tolerance between the nominal size and the actual diameter: +/- 0.01mm for 1 - 45mm diameter setting rings; +/- 0.0004" for 0.1" - 1.8" diameter setting rings, Cylindricity: 1.0 micrometer for 1 - 45 mm diameter setting rings; 0.00004" for 0.1" - 1.8" diameter setting rings.

Manufacturer: Fluke Brand: Fluke Model: 4112745

Models covered: • Fluke 568 Infrared and Contact Thermometer • Fluke 568 Ex Intrinsically Safe Infrared Thermometer.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-315

SETTING RING, 2 .5 IN