Inside Measurement - Page 68

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 145-189

The 145 series vernier inside micrometer has caliper-type jaws and a vernier scale in metric units for making precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: GOODSON Brand: Goodson

Economy Bore Gauge (.0001)

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads. True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20317, 3-Point Bore Gage Heads, Head Size .787-1.023"

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads. True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20315, 3-Point Bore Gage Heads, Head Size .511-.630"

Manufacturer: Starrett Brand: Starrett Model: 82MAB1

The Starrett 82MAB1 Head for Dial Bore Gauge has a measurement range of 2.7 to 6.76 mm and gradient spacing of 0.002 mm. This indicator is for use with Starrett 82 probes (sold separately). The dial provides metric measurement readings. This direct-measuring gauge head is useful for controlling approach to tolerance without removing the workpiece from a machine.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore Lever Style Handles: For Use With Flexbar 3-Point Bore Gaging System.. For The Accurate And Precise Measurement Of Internal Diameters.Measuring Range: .236"/6mm To 7.87"/200mm. Flexbar Lever Style Bore Gage Handles Can Be Used With The Entire Range Of True-Bore 3-Point Bore Gage Heads. Ideal For Use In Vertical Gaging Applications And Tight Access Situations. Model No. 20311, Accepts Heads: .630"/16mm - 7.874"/200mm

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA Extension for Intrimik micrometers is an accessory to Intermik Micromaster and Style A metric micrometers for extending its reach for measurement of a deep hole. It has a set of retractable, spring-loaded arms for self-centering. The accessory is made of high-grade tool steel for durability and has a satin-chrome rust- and glare-resistant finish .Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Flexbar Brand: Flexbar

Flexbar True-Bore 3-Point Bore Gaging System. Specifications For Ordering Handles, Gage Heads . True-Bore Is The Result Of Over 25 Years Of Design And Manufacture Of 3-Point Bore Gaging Systems. Ideal For Solving Internal Diameter Measurement Problems On The Shop Floor And Inspection Areas, The System Is Available In A Large Measuring Range For Specific Applications. Mechanical And Electronic Dial Gages As Well As Linear Probes Can Be Used As Specified. Main Features: True-Bore Heads Have A Large Measuring Range And Are Supplied With Fixed Anvils Eliminating Operator Error. 24 Heads Cover .236"-7.87" (6-200mm Range). Unique System Design Allows Two Measuring Handles Or New Pistol Grip Triga-BoreTM To Cover .236"-7.87" (6-200mm Range). Extensions Available For Increased Gaging Depths. Repeatability: .0001"/0,002mm. High Degree Of Accuracy Can Be Achieved Without Need For Special Skills. Customer Can Specify Type Of Output. Ideally Suited To Simple Or Integrated Measurement Applications. Can Be Used For Special Applications Such As Threads 'O' Ring Grooves, Spherical Forms, Etc. Ergonomically Designed Handle Offers Single Handed Operation. Accurate Calibration And Linearity Checks Can Also Be Made Using Flexbar's True-Cal System. Model No. 20320, 3-Point Bore Gage Heads, Head Size 1.575-1.968"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-026

The Mitutoyo 368 series Holtest vernier inside micrometer has two-point contacts for measurement of the inside dimension (ID) of small bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001”. The measuring faces are made of hardened steel and the micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 368-025

The Mitutoyo 368 series Holtest vernier inside micrometer has two-point contacts for measurement of the inside dimension (ID) of small bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.0001”. The measuring faces are made of hardened steel and the micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.