Inside Measurement - Page 93

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-411

The Mitutoyo 511-411 Dial Bore Gauge for Blind Holes has a measurement range of 15 to 35 mm and is accurate to + or - 0.005 mm. It is precise to 0.01 mm and can measure internal diameters at positions close to the bottom of blind holes. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points provide extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Flexbar Brand: Flexbar

Precision Reference Standard and Stylus Check. Shows actual patch mean values certified by the NIST. Calibrate your surface analyzing equipment to peak efficiency. Provides economical calibration tool which permits the technician to calibrate surface analyzing equipment to its peak efficiency. It is the only calibration block on the market to show the actual patch mean values low and high microinch surfaces and certified by N.I.S.T.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA measuring head for inside micrometers is an accessory for use with the Brown & Sharpe TESA Alesometer LCD capa micrometer. It has three-point contacts for self-centering measurement of the inside dimension (ID) of bores. The measuring head is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are made of hardened steel and may be uncoated or tungsten carbide-tipped for wear resistance, depending on the model.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 823EZ

Highly useful for internal linear measurements such as measuring cylinders, rings, setting calipers and parallel surfaces.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

To be used with Brown & Sharpe MICROMASTER INTRIMIK Micrometer

Manufacturer: Starrett Brand: Starrett Model: 687-1Z

Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA Extension for Intrimik micrometers is an accessory to Intermik Micromaster and Style A metric micrometers for extending its reach for measurement of a deep hole. It has a set of retractable, spring-loaded arms for self-centering. The accessory is made of high-grade tool steel for durability and has a satin-chrome rust- and glare-resistant finish .Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4200-0333

HHIP inside micrometer set features the combining of extension Rods provides a wide measuring range Carbide measuring faces positive lock clamp supplied with a standard caliper gage for zero setting product specifications: range: 4-36".

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA Extension for Intrimik micrometers is an accessory to Intermik Micromaster and Style A inch micrometers for extending its reach for measurement of a deep hole. It has a set of retractable, spring-loaded arms for self-centering. The accessory is made of high-grade tool steel for durability and has a satin-chrome rust- and glare-resistant finish .Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Internal micrometers