Indicators - Page 108

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2803S-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Flexbar Brand: Flexbar

Flexbars On Weighted Bases . Made In U.S.A. Instant Positioning - Instant Locking Universal Holder/Positioners For All Agd Indicators And Electronic Sensors (Lug Backs Too!). The Heavy Duty Flexbar Is Completely Flexible; Lets You Reach Over, Under, Around, Instantly And Surely. Elimination Of The Large Assortment Of Rods, Swivels, Clamps And Other Hardware Necessary To Reach And Measure In Obstructed Areas. Cuts Set-Up Time As Much As 75% To 90%. Flexbar Sets And Locks With A Simple Twist Of The Lever. Top Mounting Clamp: (Telescopic Action) Grips Objects From .125" Up To .510" Diameter. Cable And Swaged Fittings Are Stainless Aircraft And Mil Spec Grade. Locked By Tensioning Of Cable, Incredible Rigidity Is Achieved By This Design. (No Movement Once Locked). Cam Action Locking. Now, Universal And Off-The-Post Style Flexbars Are Available Mounted On Heavy Duty 6" Dia. Weighted Base. Ideally Suited For Benchtop And Laboratory Uses. Model No. 18042-Wb, Jumbo Off-The-Post Style Flexbar On Weighted Base.

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus with 0.5 mm ruby ball. Stainless steel base, 3 mm diameter x 5 mm long. Tapered carbide shaft with 1.0 mm major diameter and 0.30 mm minor diameter. Overall stylus length is 19.0 mm. Stylus weight is 0.32 gram.

Manufacturer: ABS Import Tools Brand: HHIP

Quick, accurate, easy centering in boring and milling set-up on horizontal or vertical machines. | Operates at an angle from horizontal to vertical machines, and from internal to external diameter without any change by simply changing the feeler. | Face of the indicator remains stationary.

Manufacturer: CENTRAL TOOLS INC Brand: Central Tools

Dial 0-1 Indicator Set W/Mag Base-2pack.

Manufacturer: Flexbar Brand: Flexbar

Mini Digital indicators. Features for Mini Digital indicator: Zero Setting, mm/inch selection, Absolute/relative mode, Preset value recall, Data transmission, Selection of Measuring direction, 4.25" Overall Length, 8mm Mounting Stem Rear Dovetail offers additional fixing options. Range: 12,5mm/.5" Features for Mini Test Indicator: .8mm Range. 2.9" Overall Length . Features for Both Mini Digital Indicator & Test Indicator. Digital Display LCD, height of digits: 6mm. Output: RS 232, with external power supply

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus with 0.4 mm carbide ball. Stainless steel base, 3 mm diameter x 5 mm long. Stepped carbide shaft with 1.0 mm major diameter, 0.50 mm intermediate diameter, and 0.25 mm minor diameter. Overall stylus length is 10.0 mm. Stylus weight is 0.21 gram.

Manufacturer: Brady Worldwide, Inc. Brand: BRADY WORLDWIDE INC

Brady Worldwide, Inc. DIA-375-RD - Brady Dia-375-Rd 0.375 Width X 0.187 Height, B-500 Repositionable Vinyl Cloth, Matte Finish Red Die Cut Inspection Arrows

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus with 0.4 mm carbide ball. Stainless steel base, 3 mm diameter x 5 mm long. Stepped carbide shaft with 1.0 mm major diameter, 0.50 mm intermediate diameter, and 0.25 mm minor diameter. Overall stylus length is 18.0 mm. Stylus weight is 0.30 gram.

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus with 0.4 mm carbide ball. Stainless steel base, 3 mm diameter x 5 mm long. Stepped carbide shaft with 1.0 mm major diameter, 0.50 mm intermediate diameter, and 0.25 mm minor diameter. Overall stylus length is 15.0 mm. Stylus weight is 0.27 gram.