Indicators - Page 151

Manufacturer: Starrett Brand: Starrett Model: 234A-20

Starrett 234A-20 end measuring rod with insulated handle and spherical ends, 20 inch Length. Starrett 234 end measuring Rods or “standards” are for checking and setting micrometers of 2 inch capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.

Manufacturer: Starrett Brand: Starrett Model: 234A-18

Starrett 234A-18 end measuring rod with insulated handle and spherical ends, 18 inch Length. Starrett 234 end measuring Rods or “standards” are for checking and setting micrometers of 2 inch capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-780-0 Color: Black

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2415S-10

An unique shock-proof mechanism is incorporated, providing improved immunity to shock due to sudden spindle retraction caused by high impact. Provided with an improved resistance to shop floor contaminants such as water and dust. Due to the spindle bushing being offset from the stem, spindle movement will not be hindered or jammed when clamping along the stem. A pair of limit hands are provided for quick and easy tolerance judgment (GO/ +/- NG). The crystal is hard coated for durability and scratch resistance.

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 2016004

Approximate  57mm diameter with soft-yellow tint. Approximate 2.250in diameter with soft-green tint. These indicators are normally furnished with continuous dial (with R. C. ) or + on right balance dial (w/o R. C. ), lug back, .18" by .250" long contact and tolerance hands.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2507SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2507SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: INSIZE Brand: INSIZE Model: 6210-81E

Universal magnetic stand, Applicable holding stem 3/8 inch diameter.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2915S-10 Color: White

Manufacturer: USA Technologies Brand: USA Technologies Model: SM170

SnackMiser SM170 with PIR Occupancy Sensor. EZ Mount Z-Bracket for indoor use attaches directly to snack machine with industrial strength Velcro. Installs quickly and allows SnackMiser to move with the machine. Use in locations where snack machine placements are subject to change or if wall mounting is not desired.