Indicators - Page 152

Manufacturer: Flexbar Brand: Flexbar

Centering Microscope. Adapts to any Machine spindle With maximum accessibility to the operator. 45X Magnification for optical Position accuracy of .0001". Single dash Line Reticle for easy observation of the work Reference line. Unique compensation of spindle runout by adjustment Screw. Straight shank 1/2" Diameter, eyepiece Angle 60°. Field of view .100" Diameter, focal length 5/8". Optional Edge Block to locate the Edge of any work piece to the spindle axis, and V-Block Gage for Precision Centering of a V-Block to the spindle for cross axis boring. Model No. 17274, V-Block Gage for Centering Microscope (Model No. 17272).

Manufacturer: Draper Model: 46608

Manufacturer: Fisso Brand: Flexbar

Strato Line 3D Articulated Arms for Gauges, Without Fine Adjustment and Base. Model No. 14830, Strato Line 3D Articulated Arms Only. Approx. radius of movement mm/in.: 130/5.15" Approx. Carrying Capacity Lbs.: 6

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2805S-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Flexbar Brand: Flexbar

Magnetic Edge Finders. Manufactured by Flexbar to the highest precision. Conveniently attaches itself to workpiece With built-in permanent Magnet. Precision ground, allows work pieces to be indicated Within accuracy of ±.0001". If hole or slot is indicated to CenterLine of spindle, the Edge of workpiece will automatically be on Center line. Avoids calculation errors by eliminating additions or subtractions.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1929S-62 Color: White

Unlike many other dial indicators, the one revolution dial indicator literally shows the entire spindle travel or range as one sweep of the hand, eliminating the possibility of reading errors due to miscounting the multiple revolutions. With one-revolution dial indicators, "within tolerance" and "out-of tolerance" can never misinterpreted An unique shock-proof mechanism is incorporated, providing improved immunity to shock due to sudden spindle retraction caused by high impact.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1923TB-10 Color: white

0.0005 In, 0.05 In/(0.02 In per rev) Dial Indicator, 0-10-0, Lug Back, Series 0, 3/8 In stem diameter, Jeweled.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2416SB-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1167T Color: White

Mitutoyo Dial Indicator, Graduation: .001", Range: .200", Dial face: 0-25-0, Back: Back Plunger, Series: 1, Jeweled: No, Stem: 3/8".

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Tesa design swiss made.