Indicators - Page 155

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-406

Large, easy-to-read LCD. Internal calculations using the simple formula of [F(x) = Ax)] are available. With SPC data output. Stem diameter 3/8" 4-48 UNF (Unified Fine Thread) Thread size. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Battery: SR44 (1 pc.), 938882. Battery life: Approx. 5,000 hours under normal use Dust/Water protection level: IP42 or IP53 (dust-proof type). Measuring force: 0.2N - 0.5N.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-481B

The absolute digimatic indicator performs internal calculations using the formula AX+B+CX-1 (assuming spindle displacement as X) while the specified coefficients a, b and, c can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique features allows you to read your measurements directly, without fumbling for conversions.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-530-124-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-282B

The Mitutoyo 543-282B Absolute Digimatic electronic indicator gauge, ID-C series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications in harsh environments. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or - 0.00012". The LCD screen displays measurements in inches and metric units. The indicator has a go/no-go display that lights green or red, respectively, when upper and/or lower tolerances have been set. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance-type linear encoder helps prevent overspeed errors and ensure accurate measurements. This model is Ingress Protection certified IP54 for protection against dust and water. Additional functions for this indicator include remote control, max/min/runout value holding, origin set, preset, zero set, counting direction switching, and alerts for low voltage, counting value composition, overflow, and tolerance limit setting errors. The measuring force is 2.0 Newtons (N) or less. This unit comes with a built-in power cord with exposed wires at the end for wiring into a device such as a programmable logic controller (PLC) (sold separately) for power and communications. This gauge can output the judgment signal using the included 4m cable.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.001mm)Accuracy+ or - 0.00012"Measuring force2.0N or lessStem#4-48 UNF contact point thread mount with 3/8" diameter stemFaceLCD displays in both inches and metric units, green or red lighting displays go/no-go judgment, with flat backData input/outputSignal input (remote control) and judgment signal outputDimensions127.85 x 60.5 x 36.1mm (H x W x D)Weight335gStandardsIP54Power sourceBuilt-in power cordH is height, the vertical distance from the lowest to highest point with stem at rest; W is width, the ho...

Manufacturer: Seco-Larm Brand: Seco-Larm Model: ODC-59A

Features. For NONC circuits three wires. Overhead door surface mount.. Gold and deactivated rhodium plating for longer life and reliability.. Switch contained in curved low-profile cast-aluminum housing.. Magnet in gray ABS plastic case mounted on L-shaped bracket.. 24 in. 61 cm Wire leads enclosed in stainless-steel cable.. 2.75 in. 70 mm Gap.. Switch dimensions 4-38 in. x1.75 in. x716 in.

Manufacturer: Amico Brand: Amico

Features: Wied DC 12V Working Voltage, Green light, Plastic cap, White cables. The DC 12V Indicator Lamp is suitable for water heating use.

Manufacturer: CISNO Brand: CISNO

Specification: Face: 1-1/4" diameter yellow face Dial type and reading: 0-40-0 balanced inch and 0-25-0 balanced metric readings Range: 0-0.8mm Graduations: 0.0005"/0.01mm Contact point length: 1/2" Dovetail clamps: 3/8" and 5/32" Mounting type: Dovetail Package include: 1 x Fowler yellow-face dial test indicator 1 x 3/8" dovetail clamp 1 x 5/32" dovetail clamp 1 x Molded case

Manufacturer: CML Innovative Technologies Brand: CML Innovative Technologies Model: 192A2255

Panel Mount LED Indicator, 1250 mcd Luminous Intensity, 9⁄17 mA (AC⁄DC) Current Rating Shock and vibration proof Easy to install High degree of protection Low power consumption Standard bezel without resistor IP40 LED Indicators are manufactured with high brightness colored diffused 10 mm. These LEDs are fitted in high quality satin chrome, black chrome or matt chrome metal bezels, supplied with fixing nut and washer. Connection is by faston⁄solder tab terminals.

Manufacturer: Starrett Brand: Starrett

Magnetic Bases, Stands and HoldersDial Indicator Contact Point, Thread Size 4-48, Construction Steel, Features 1/2 In. Wide, Bell Shape Tip

Manufacturer: Starrett Brand: Starrett

Magnetic Bases, Stands and HoldersDial Indicator Contact Point, Thread Size 4-48, Construction Steel, Features 3/8 In. Wide, Bell Shape Tip