Indicators - Page 171

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1781SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2416S-06 Color: Black

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-404T

Mitutoyo Horizontal Test Indicator, Graduations: 0.01mm, Range: 0.8mm, Dial Face: 0-40-0, Includes: Test indicator, 1mm, 2mm and 3mm carbide contact points, 4mm and 8mm stem, clamp nut, holding bar, swivel clamp.

Manufacturer: Craftsman Brand: Craftsman Back Plunger Type Dial Indicator Set, PA

Craftsman Back Plunger Type Dial Indicator Set, PART #9HT3668

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2922S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M5 stylus, 0.5 mm ruby ball, tapered carbide stem, 11.0 mm diameter x 10.0 long stainless steel base. Minor stem diameter is 0.3 mm, major stem diameter is 1.0 mm. Overall stylus length is 30.0 mm. Stylus weight is 5.78 grams.

Manufacturer: Mitutoyo Brand: Mitutoyo

Dial Indicator, 0.001 x 0.500", 0-100

Manufacturer: BETA TOOLS Brand: Beta Tools

Beta Utensili is a leading company in the production and sales of professional hand tools. The Ciceri family began producing tools in Northern Italy in the 1880s. Today, family owned Beta, or Beta Utensili is known for its direct involvement in Grand Prix racing, a relationship that dates back to the early 1970s. Research, development and quality. While nothing is perfect, we’re practicing. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. To mould an idea, encourage it to its final outcome and after that better it still, Beta works daily, in close contact with end users, researching materials, design and constant improvement. Scrupulous control on each tool ensures its invariable quality.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1168T Color: White

Mitutoyo's back plunger type dial indicators are built with the measuring spindles on the back of the units. This type of indicator offers the same precision and durability as all other Mitutoyo dial indicators, and operates very effectively with optional holding bars.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Essential for the workshop, but also in the inspection room or measuring laboratory - Ideal for comparative measurement on a surface plate - Detect form and position errors - Measure axial and radial runouts, especially. Tesa design swiss made. DIN 2270 and factory standard. Rotating dial. Friction lever system to preventing overload. Contact points with tungsten carbide ball tips. Delivery in a suited plastic case including: 1 contact point, 2mm diameter, 1 rigid stem with 8mm diameter, L = 15mm, 1 rigid stem with 4 mm diameter, L = 15 mm. Identification Serial number. Inspection report with a declaration of conformity. 0.2mm Total travel. 27mm Dial diameter. 18mm long Contact point. 4 µm Deviation span of indication. 1.5 µm Repeatability limit. 2 µm Hysteresis.