Indicators - Page 173

Manufacturer: Generic Brand: Generic

NEW HONEYWELL DI150310001000 MICRO PRO INDICATOR UDI15001005 A.S.Call us anytime at 855-705-0565

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-004-1

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-487B

A conventional digimatic indicator simply displays a spindle displacement, but the calculation-type digimatic indicator incorporates an internal calculation function in place of spindle displacement. With fixtures, measurements such as feeler, inside diameter and radius of curvature measurement can easily be obtained without the hassle of conversion tables or equivalents. Length standard: absolute electrostatic capacitance type linear encoder. Maximum response speed unlimited. Battery: sr44 (1 pc.), 938882. Battery life approximately 12 months under normal use. Function are origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only). Alarm: low voltage, counting value composition error, over-flow error, tolerance limit setting error. Measuring force: 2.3N or less.

Manufacturer: INSIZE Brand: INSIZE Model: 2115-251E

Waterproof electronic indicator, 1"/25.4mm, resolution 00005" 0/001mm.

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 2033099

The Mahr 2033099 pencil-style digital transducer has a measurement range of +/- 0.040" (+/- 1.0mm) and is intended for use with Millimess series Maxum III remote indicating units (sold separately). The probe has a 0.375" body diameter and uses replaceable M2.5 thread contact points. This pencil-style digital transducer meets Ingress Protection (IP) 54 standard for protection from dust and water, and is suitable for use in measurement applications such as evaluating a machined surface.Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital display. Dial indicator gauges measure through a spring-loaded plunger driven into its shaft. The pointer on the dial display marks the degree the plunger is depressed, while an additional turn counter may track the number of times the pointer has spun around the dial. For all types of indicator gauges, runout is typically measured when the tip of the plunger (the point) is held perpendicular to the rotating workpiece. Indicator gauges are typically used in manufacturing, machining, and mechanical engineering.Mahr Federal manufactures dimensional metrology instruments and metering systems. The company, founded in 1861, is headquartered in Goettingen, Germany.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-571CAL

The calibrated Mitutoyo 543-571CAL Absolute Digimatic digital indicator gauge, ID-N body, is for measuring short, linear distances in harsh workshop conditions. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.0005" (0.01mm), and an accuracy of + or – 0.0008". The LCD displays in both inches and metric units, and can be rotated 180 degrees for taking measurements from different directions. The body is 35mm wide and can be used in locations where space is restricted. This model is Ingress Protection certified IP66 for protection against dust and water jets. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. Additional functions include zero set, preset, direction switching, tolerance judgment, hold, and alerts for low voltage, counting value composition error, overflow error, and tolerance limit setting error. This indicator gauge has a measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.0005" (0.01mm)Accuracy+ or – 0.0008"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both i...

Manufacturer: Starrett Brand: Starrett Model: P2731-0

Pt2731-0 1.0" .00005"Wi

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-266B

This ID-C Series Digimatic Indicators are exclusively designed for ID measurement.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-287B

The Mitutoyo 543-287B IDC-C112REB Digimatic indicator gauge measures to 0.5” (12.77 mm), has an LCD digital readout with selectable resolution of 0.00001” (0.0002 mm) or 0.05” (1 mm), and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). The gauge is accurate to + or - 0.00012” (0.003 mm), and supports a measuring force of 1.5 newtons or less. The unit runs on, and includes, one SR44 battery. This indicator gauge has an electronic microprocessor that can perform calculations based on spindle displacement and programmable arithmetic coefficients for direct measurement of inside diameter and radius of curvature when used with optional fixtures (sold separately). It can also preset a reference height at any position, set a temporary zero position and return to a true zero reading, switch counting direction, set upper and lower tolerance bounds, and indicate in- or out-of-tolerance (GO/±NG) measurements when bounds are set. The LCD digital readout can display measurements in inches or metric units. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable for SPC (sold separately). An electrostatic capacitance linear encoder helps prevent overspeed errors which help ensure repeatable, precise measurement. The gauge’s stem diameter is 3/8”, with threads conforming to #4-48 UNF of the Unified Thread Standard (UTS). The gauge conforms to the American National Standards Institute/American Gage Design (ANSI/AGD) standard. Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital displ...

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Electronic Digital Indicator Series 543 Resolution .0001/0.001mm Accuracy .00012 Range 0.500/12.7mm Long Form Calibration Certificate Yes Features With SPC Data Output Includes Certificate Of Calibration Traceable To NIST, Battery This listing is for each.