Indicators - Page 177

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-701

Mitutoyo Dial Bore Gage, Range: 18mm - 35mm, NOTE: Supplied without Dial Indicator and Indicator Cover

Manufacturer: Cropmeters.com Brand: Cropmeters.com Model: FP003

This stainless steel fruit firmness tester has a dual range that allows you to measures general fruit firmness with a range of 0.5-12kg/cm2. with the thinner 8mm tip which is ideal for Apples, Peaches, Pears, Avocado, Kiwi, Tomatoes. You can also change the measurement range by swapping tips to the thicker 11mm diameter tip and using the penetrometers dual display to a measurement range of to 1-24kg/cm2 for tougher fruits. Using the penetrometers dual dial display it makes it easy to measure the firmness of nearly all fruits. Fruit firmness is considered one of the most accurate ways to test for a fruit maturity and quality. By measuring a fruits firmness you can make decisions about when to harvest, which fruits seeds to breed, can make decisions on which fruits to export or transport and for example which fruits should be processed and which fruits should be sold fresh. Directions for use.1. Turn the trailing dial to zero. 2. Use a potato peeler or a knife to remove the skin layer of the fruit. 3. Position the penetrometer perpendicular to the fruit. 4.Slowly and steadily press the sensor until it penetrates the pulp of the fruit. 5. Once the tip has penetrated the fruit pulp, read the value of the trailing dial.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-580-250-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-199-0

The Fowler 52-520-199-0 black-face dial indicator with magnetic base and continuous dial has a 0-1" measuring range, 0.001" graduations, a revolution counter, and tolerance markers, and is designed to measure variations in thousandths (0.001"). The American Gage Design (AGD) Group 2 dial has a 2-1/4" continuous dial with a reading of 0-100, a revolution counter, a total measuring range of 0-1" and 0.001" graduations, with each revolution equal to 0.1". An adjustable bezel and dial zeros the reading at any location. Tolerance markers allow operators to observe limits at a glance. The magnetic base has an 85lb. pull and the ability to mount test indicators with a 1/4" post. Fine adjustment knobs allow for making micro-adjustments. The base is 2 x 2-11/32 x 1-13/16 inches (H x W x D) and has a V-shape for mounting on round surfaces. (H is height, the vertical distance from lowest to highest point; W is width, the hori­zontal distance from left to right; D is depth, the horizontal distance from front to back.)   The set includes a dial indicator, magnetic base, and fitted storage box. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.   Specifications   Dial face type and diameter AGD Group 2, 2-1/4" diameter face Dial type Dial type and reading Continuous 0-100 Range and graduations 0-1" Graduations 0.001" Revolutions Up to 10 revolutions, each revolution equal to 0.10" Contact point construction Carbide contact point with 0.080" diameter Magnetic base pull 85lb.                                       �...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-109-0 Color: Black

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-110-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: uxcell Brand: uxcell Model: a13112800ux0646

3D rigid metal arm movement. Central locking mechanism, one knob locking system. Dovetail clamp for holding most dial test indicators or gauges. Clamping hole for holding many indicators stem. Use this compact rotary magnetic base in tight areas where full size base will not fit.

Manufacturer: HHIP Brand: Pro Series by HHIP Model: 4400-1101

Pro-Series 0-10mm Metric Dial Indicator .01mm Graduation Reading: 0-100 Rack & contact point made of hardened stainless steel. Jewel LED movement. 2" diameter dial face. Stem: 8mm Lug back.

Manufacturer: HHIP Brand: Pro Series by HHIP Model: 4400-1110

Pro-Series 0-5mm Metric Dial Indicator .01mm Graduation Reading: 0-100 Rack & contact point made of hardened stainless steel. Jewel LED movement. 2" diameter dial face. Stem: 8mm Lug back.

Manufacturer: HHIP Brand: Pro Series by HHIP Model: 4400-0019

Pro-Series 0-20mm Metric Dial Indicator .01mm Graduation Reading: 0-100 Rack & contact point made of hardened stainless steel. Jewel LED movement. 2" diameter dial face. Stem: 8mm Lug back.