|
|
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $121.48 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909S-62
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909S-62
Color: White
|
The Mitutoyo dial indicator has a white face, one-revolution, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. It has a one-revolution display that shows the entire spindle range in fractional inches to enhance readability. A rotating bezel sets the indicator to zero at any spindle location, and moveable limit markers can be set to indicate tolerance levels. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, dustproof, shockproof, and a white face.Dial indicators are al...
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $121.92 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909SB-62
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 2909SB-62
Color: White
|
The Mitutoyo dial indicator has a white face, one-revolution, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. It has a one-revolution display that shows the entire spindle range in fractional inches to enhance readability. A rotating bezel sets the indicator to zero at any spindle location, and moveable limit markers can be set to indicate tolerance levels. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, dustproof, shockproof, and a white face.Dial indicators are al...
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $122.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1909S-62
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 1909S-62
Color: White
|
The Mitutoyo dial indicator has a white face, one-revolution, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. It has a one-revolution display that shows the entire spindle range in fractional inches to enhance readability. A rotating bezel sets the indicator to zero at any spindle location, and moveable limit markers can be set to indicate tolerance levels. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, dustproof, shockproof, and a white face.Dial indicators are al...
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $123.79 1% OFF
Manufacturer: PHASE II
Brand: PHASE II
Manufacturer: PHASE II
Brand: PHASE II
This portable optical comparator is utilized to check diameters, angles, hole sizes, thread measurements, radii, thickness and many other applications, via interchangeable reticles. Brilliantly clear optics offer undistorted images and highly accurate measurements. The scales are photo-etched into the glass reticles, which get placed in actual contact with the measured object. Includes: (1) 10X comparator. (9) Reticles. (1) Fitted case.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $131.73 50% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-570-000-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-570-000-0
|
The Fowler 52-570-000 back-plunger style universal dial indicator has a 1-1/2" diameter continuous dial, a 0.200" measuring range, and 0.001" graduations, and is designed to measure surface variations in fractions of an inch. The white face has a contrasting hand to make measurements easy to read. The 0-100 continuous dial has a total measuring range of 0.200" with 0.001" graduations. Brass bearings are economical and accurate. Attachments provide a range of mounting options. The set includes a dial indicator, G clamp, tool post base and vertical rod, extension rod, 3/16" standard anvil, 5/16" anvil, thumb clamp, swing arm attachment, and a fitted storage case. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. SpecificationsDial face type and diameter 1-1/2" diameter horizontal face Dial type and reading Continuous 0-100 dial Measuring range 0.200" range Graduations 0.001" graduations Bearings Brass Anvils 3/16" standard and 5/16"Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators...
-
2.0 of 5.0 with 3 Reviews
SALE PRICE: $144.00
Manufacturer: Starrett
Brand: Starrett
Model: 3809AC
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 3809AC
Color: White
The Starrett 3809 precise, high quality test indicator offers a full complement of standard features. Indicator includes two contact points, two dovetail clamps, swivel post holder, tool post holder, contact wrench and case.
-
2.0 of 5.0 with 3 Reviews
SALE PRICE: $155.00 1% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 3909AC
Color: White
Manufacturer: Starrett
Brand: Starrett
Model: 3909AC
Color: White
The Starrett 3909 precise, high quality test indicator offers a full complement of standard features. Indicator includes two contact points, two dovetail clamps, swivel post holder, tool post holder, contact wrench and case.
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $187.55 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-095-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-585-095-0
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
1.6 of 5.0 with 3 Reviews
SALE PRICE: $8.95 42% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4401-0401
Manufacturer: HHIP
Brand: HHIP
Model: 4401-0401
Universal Test Indicator Holder 1-7/8" clamping diameter Length from center of clamping bracket to indicator: 6-1/2". Fits Bridgeport "J" head.
-
1.6 of 5.0 with 3 Reviews
SALE PRICE: $63.92 1% OFF
Manufacturer: HHIP
Brand: HHIP
Model: 4400-0013
Manufacturer: HHIP
Brand: HHIP
Model: 4400-0013
2 Piece 0.03" Test Indicator and Indicator Holder Kit Universal test indicator Holder has 1-7/8" clamping diameter Length from center of clamping bracket to indicator: 6-1/2". Holder fits Bridgeport "J" head. 0-0.03" Test Indicator has a resolution of 0.0005". The indicator also has a precision pivot bearing and a saTiN chrome finish. The indicator has a 0.098: contact point and 2 stems that are 7/32" and 1/4". The indicator has jewel LED movements and automatic reversing.
|
|