Indicators - Page 161

Manufacturer: Narishige Brand: Narishige

Narishige GJ-1 Magnetic Stand With on / off switch. Magnet Dimensions: 50W x 80D x 55H (mm). Narishige's GJ-1 magnetic stand can be used with 10mm outer diameter bar mount type manipulators including the MN-151; M-152; MN-153; MO-150; MO-155; WR-6; M-40B; BC-3; BC-4; BE-8; UM-3C; UM-3FC; UM-2FC; UM-2C; UM-1C; UM-1F; UM-1FC; UM-12F; and UM-12FC.

Manufacturer: Q-Mark Manufacturing Inc. Brand: Q-Mark

M4 stylus, 6.0 mm ruby ball. 7.0 mm diameter x 12.0 mm long stainless steel base. 4.5 mm diameter ceramic stem. Stylus length to ball center is 100.0 mm. Stylus weight is 7.95 grams. Compare to Renishaw A-5000-3712.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: MW216 Color: White

The Brown & Sharpe 14.82022 AGD 2 dial indicator reads to 0.001”, with one revolution of the dial being 0.10”, and the total available measurement being 1.0”. The white dial face includes a revolution counter to keep track of the overall measurement and a contrasting black hand to help make measurements easy to read. The ball contact tip reaches into the workpiece to make accurate measurements of turned, milled, and ground parts, for tool setting gauges, fixtures, and inspections. The racks and bottom bearings are made of stainless steel, for corrosion resistance. Rack teeth are ground to ensure accuracy. The central lug back can be rotated 90 degrees for vertical or horizontal use. The dial face is 2 1/4” in diameter. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metrol...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: MB216 Color: Black

The Brown & Sharpe 14.82022 AGD 2 dial indicator reads to 0.001”, with one revolution of the dial being 0.10”, and the total available measurement being 1.0”. The black dial face includes a revolution counter to keep track of the overall measurement and a contrasting orange hand to help make measurements easy to read. The ball contact tip reaches into the workpiece to make accurate measurements of turned, milled, and ground parts, for tool setting gauges, fixtures, and inspections. The racks and bottom bearings are made of stainless steel, for corrosion resistance. Rack teeth are ground to ensure accuracy. The central lug back can be rotated 90 degrees for vertical or horizontal use. The dial face is 2 1/4” in diameter. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. Brown & Sharpe was founded in 1833, had a major part in setting industrial standards in the United States, and has given its name to several standards, including a tool spindle taper, a worm threadform, and others. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and has since focused on precision measuring equipment and metro...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-518T

Mitutoyo Pocket Test Indicator Set, Graduations: .001", Range: .040", Dial Face: 0-20-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, 2 holding bars.

Manufacturer: INSIZE Brand: INSIZE Model: 2381-301

Dial Test indicator, 008 inch graduation 0001 inch.

Manufacturer: NOGA Brand: Noga Model: MG61003 TTC

NOGA MG61003 Magnetic Base & TTC 1" Dial Indicator Set

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2414SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: USA Technologies Brand: USA Technologies Model: SM150

SnackMiser SM150 with PIR Occupancy Sensor. Wall-mounted for indoor use. Use on non-refrigerated snack machines in locations where snack machine placements are not subject to change. Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2414SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...