Indicators - Page 162

Manufacturer: Flexbar Brand: Flexbar

Off-the-Post Flexbars. Maximum Rigidity ; Excellent Positioning. The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Precision Engineered. Instruments held by Flexbar do not drift. Instant Positioning - instant Locking. Post Clamp (Clevis) Fits 1/2" Dia. Post. Supports up to 4 lb. Load. Accurate tool and instrument Positioner. Use With: AGD and Test indicators, Sensors, Magnifiers, Optic Probes, Wires for Welding, etc. Flexbar Dimensions: Bottom of Base to Top of 1/2" Dia. Post - 9". Length of Flexbar itself - 10". Cable: 19 strand stainless steel Wire has aircraFt Grade swaged fittings. Patented Drawbar & Locking Knob design Produces incredibly rigid Arm, once locked. Top Mounting Clamp grips All shapes .125" to .510" Dia. Model No. 18047, Flexbar With Mag. Base and Fine adjustment.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Declaration of conformity

Manufacturer: INSIZE Brand: INSIZE Model: 2115-10E

Waterproof electronic indicator, 5 inch 12 7mm resolution 0005 inch 0/01mm.

Brand: VX680 Model: MIS-M268-D80-00

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe TESA Tesatast series dial test indicator has a white face, a 0.0787" stem diameter, and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face is mounted on the top of the indicator at a right angle to the axis, and two universal dovetail mounts can be used for mounting from the front or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanc...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-781B

0.01 mm X 12.7 mm IDS Digimatic Indicator, 8 mm stem, Flat Back.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Tesa YE Dial Gauge includes 58mm dial diameter, 0.01mm reading. Special feature: adjustable tolerance markers measuring insert with a M2.5 thread. Included in scope of supply: 3mm diameter ball tip, already mounted. Comes in cardboard box. Identification number. Inspection report with a declaration of conformity. Range of indication maximum plunger travel: 10.5. Shockproof design. Mm or in/revolution: 1mm.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-563-772-0 Color: Black

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fowler Brand: Fowler

Fowler's economical transfer stand is compact in size and lightweight. Perfect for applications where the stand is moved and/or needs to be transported from location to location. Includes 12 Workshop Transfer Stand Aluminum Case Features Revolutionary design Large range fine adjustment Holds test indicators or dial gages with dovetail holders & special adaptors Large capacity positioning range Can be locked in any position Large handwheel provides fine adjustment Stainless steel construction Packed in a high quality aluminum case

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: MW217 Color: White

Brown & Sharpe Dial Indicator White Face