Indicators - Page 163

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-020-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: ASIMETO Brand: ASIMETO Model: 407-02-3

Digital, Electronic Indicators, ASIMETO, Measuring Range 0 ~ 1" (0 ~ 25mm)

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-120-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: MW216 Color: White

26864 indicator.001 cont 1.00 ccw

Manufacturer: Mahr Federal Brand: Mahr Federal Model: 2015786

Mahr Federal AGD 2, 2015786, Dial Indicator 0.075" RANGE X .0005", C5M/25M, Lug back, Jeweled is used to measure dimensional deviations. It has a measurement range of 0 to .075", graduations of 0.0001", an accuracy of ±0.0005", and a range per revolution of 0.030". The dial is light green to be easy on the eyes and inch recognition with a contrasting hand for readability. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial is balanced with a reading of 0-15-0, for comparative readings.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2424S-19 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-514T Color: Yellow

The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, a 4mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (1mm, 2mm, and 3mm), two stems (4mm and 8mm diameter), a knurled clamp ring, a swivel clamp, a 100mm metric holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of th...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 7033B

Universal magnetic stand, 3/8"/6mm/8mm, Dovetail, mech. Lock

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-7041 BesTest eight-piece dial test indicator accessory set is for use with Brown & Sharpe Bestest series dial test indicators (sold separately). It includes a rectangular bar, a round bar, a short swivel shank, an angle attachment, two extensions with dovetails, a 0.040" carbide contact point, and a 0.120" carbide contact point. Carbide contact points are wear- and magnetic-resistant.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI. What's in the Box?3" Rectangular bar (5/16 x 3/16 inches [H x W]) with a 0.220" diameter stud7/32" diameter round bar (2-7/8"long) with 0.163" stepped end and 0.220" diameter stud3/8" diameter short swivel shank (1" long)3/8" diameter angle attachment (1" long)0.220" diameter extension with dovetail0.250" diameter extension with dovetail0.040" carbide contact point0.120" carbide contact point

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: MW181 Color: White

Brown & Sharpe Dial Indicator White Face