Indicators - Page 34

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-445E Color: Yellow

The Mitutoyo 513 series dial test indicator has a tilted face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The face inclines 20 degrees from the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicato...

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4336010 Color: Black

The Mahr Federal 1075R REFERENCE Digital electronic indicator gauge, is a digital indicator for measuring short, linear distances in machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm) and a resolution of 0.0005"/0.01mm. The Large crisp LCD displays measurements in inches and metric units. The Digital Indicators 1075 R are equipped with the innovative Reference-System. The zero position only has to be set one time: once it is set, the zero remains stored for all further measurements. Therefore, when the indicator is switched ON or the measuring spindle is moved the indicator is immediately ready for measurement. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB HubThe Digital Indicator 1087 R is equipped with a LOCK function. With this key lock the zero position is secured and operating error is avoided. The face of the indicator is fixed for easy reading in bench or fixture gages. This unit has a 8mm diameter stem and a 2.5m contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. The 1075R is Ingress Protection certified IP52 for protection dirt and dripping water. Additional functions for this indicator include ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (for entering a numerical value), DATA (data transmission with a data connection cable), LOCK-Function: Individual buttons can be locked. The measuring force is 1 Newton (N) or less. It has a battery life of nearly 3 years of normal use. This unit comes with a CR 2032 battery.

Manufacturer: Avery Weigh-Tronix, LLC Brand: Brecknell Model: MODEL SBI 100

The SBI 100 indicator is a low cost, simple to operate weight indicator designed for use in a wide range of applications. Compatible with the complete range of Brecknell platform scales the SBI 100 can be connected to any platform with a maximum of four 350 ohm load cells for use in non-trade applications

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe Model: 599-7033-5

Brown & Sharpe BesTest 599-7033-5 .00005" .008" Dial Test Indicator - Brand New

Manufacturer: iGaging Brand: iGaging

iGaging ABSOLUTE Technology IndicatorThe iGaging digital electronic indicator with ABSOLUTE encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on. Features:Full Size remote display.SPC/USB Data PortABSOLUTE encoder technology - Unlimited measuring speed.IP65 ProtectionRead and convert Inch/mm displayOrigin setPreset valueShank diameter: 3/8"Carbide tip4-48 threaded tipFloating lug back2 Years warrantySpecifications:Range: 4"/200mmResolution: 0.00005"/0.001mmAccuracy: 0.0003"

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4306960

Mahr Federal 801 S1MarTest 4305960, 0.0005" x ±0.015" Standard Test Indicator, 0-15-0, 1.1 Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-404

Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).

Manufacturer: INSIZE Brand: INSIZE Model: 2112-101E

Electronic indicator, 5 inch 12 7mm resolution 00005 inch 0/001mm.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Base has a vee recess and one magnetic flat face with disengageable magnet. Articulations made from duralumin. Consisting of: 1 articulated arm, 1 dovetail clamp with fine adjustment and 1 magnetic base. Mass: 0.4 kg. Declaration of conformity. Magnetic base measures 30mm length by 30mm width by 30mm height. 120mm Length articulated arm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-795B

.5 In/12.7mm, .00005 In/0.001mm, ID-S ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, Dustproof, ISO.