Indicators - Page 62

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Lever-type dial test indicators are especially intended for use on the shop floor or in the inspection room - Ideally suited for comparative measurements on a surface plate, for instance - Determine form, shape and position deviations as well as axial and runout errors. Monobloc housing with 3 countersunk dovetail attachments. Well-proven dial test indicators with dial face mounted parallel to the insert's axis. Tesa design swiss made. Standard: DIN 2270 NF E 11-053. Rotating dial. Movement with patented shock proof system. Lever system with friction drive to prevent overload. Supplied in a plastic case along with: 1 Insert with a 2mm diameter, 1 Wrench and 1 Mounting rod with a 8mm diameter. Identification number. Declaration of conformity. 38mm Dial diameter. 12.53mm Insert.

Manufacturer: L.S. STARRETT Brand: L.S. Starrett

3 different styles of contact points. Accurate and reliable. Few moving parts. Simple operation

Manufacturer: L.S. Starrett C Brand: L.S. Starrett Model: PLX67323

Accommodates similar indicators of other manufacturers. For use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators

Manufacturer: CAS Corporation Brand: CAS Model: CI-201A-DB

The CI-200 Series, a family of digital indicators providing full featured versatility and dependability at an economical price. A wide array of standard features include either 304 stainless steel IP67 rated or hardened plastic NEMA 12 enclosures, AC or DC operation, choice of dry cell or rechargeable battery, full function numeric keypad, ID capabilities, and much more.

Manufacturer: Starrett Brand: Starrett Model: P2741-1M

The Starrett P2741-1M Remote Display Probe is used with the Wisdom Series Remote Displays (sold separately), has a resolution of 0.002 mm, an accuracy of + or - 2 resolutions, and a total measurement range of 0 – 50 mm. The probe has a sealed housing with a glass scale design, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The 5-3/4” (146-mm) rectangular housing has a rear mounting bracket with a 1/4” (6-mm) diameter hole. The probe has a 6’ hardwired cable that connects it to the display (sold separately), and is manufactured to American Gage Design (AGD) standards. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-694

Length standard: Absolute electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Battery: SR44 (1 pc.), 938882. Battery life: Approx. 20,000 hours under normal use. Dust/Water protection level: IP42 (IP53: 543-694, 543-695, 543-696) Measuring force: 2.0N or less. Origin-set, Zeroset, Counting direction switching, Power ON/OFF, Data output, inch/mm conversion (on inch/metric models only) Alarm: Low voltage, Counting value composition error, Over-flow error.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

IP65 indicators with electronic module protected against the penetration of liquids. Made to measure in extreme workshop conditions - water and coolant resistant (IP65) - 44mm dial diameter - lets you take advantage of the mechanics combined with digital reading. Choice between absolute (ABS) and relative (REL) measuring modes. Numerical display. Possible setting of PRESET value to +/-130 mm. Inverse measuring direction. Direct conversion of the metric/inch units. Automatic shut down. 5-Digit LC display + sign. 6mm Digit height. Zero-setting of display. Deviation span of indication: 20 µm. Repeatability limit: 5 µm. Measuring force: 0.5 to 0.9 N (+/- 0.15 N). Maximum displacement speed: maximum 2 m/s. Number of measurements per second: 7. Working temperature range: + 5 degree C to + 40 degree C. Power supply: 3V lithium battery, type CR 2032. Autonomy: battery life > 3500 hours. Digital interface: RS232. Mass: 70 g. Electromagnetic compatibility: EN 61326-1. Degree of protection: IP65 (IEC 529). Shipping case including 1 lithium battery, type CR 2032. Identification number. Declaration of conformity. Models 0.01 mm with report.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-501B

Mitutoyo Absolute Digimatic Solar Indicator ID-S, .5"-12.7mm, .00005"-.001mm, ISO, Stem Dia. 8mm, with flat back, SPC Output: yes

Manufacturer: Starrett Brand: Starrett Model: 2740-1M

The Starrett 2740-1M metric Wisdom Basic Electronic Indicator has three user-selectable resolutions with a maximum resolution of 0.002-mm, accuracy of + or - 2 resolutions, and a total measurement range of 0 - 50-mm. The digital display has a sealed housing with a glass scale design, a maximum read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The 5-3/4” (146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4” (6-mm) diameter hole, and an output jack that allows for data transmission to PC compatible RS-232C (serial port) supported devices. Manufactured to American Gage Design (AGD) standards, the indicator can be powered from any of three sources: 110V AC adaptor, rechargeable zinc-air batteries, or through the data port. An auto-off feature turns the indicator off after 10 minutes of nonuse. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered i...

Manufacturer: INSIZE Brand: INSIZE Model: 2103-25E

Electronic indicator, 1"/25.4mm, resolution 00005" 0/001mm.