Ground Resistance Meters - Page 2

Manufacturer: Fluke Corporation Brand: Fluke Model: ES-162P3

The Fluke ES-162P3 three-pole stake kit is used with Fluke 1623 and Fluke 1625 ground earth testers to perform 3-pole fall-of-potential testing. The fall-of-potential method measures the ability of the earth ground system or individual electrode to dissipate energy from the site. This five-piece kit includes three stakes, one 50m/164ft. cable reel of wire, and one 25m/82ft. cable reel of wire. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA. What’s in the Box? (3) Stakes Cable reel of wire, 50m/164ft. Cable reel of wire, 25m/82ft.

Manufacturer: Gerneric Brand: Gerneric

Function Ground resistance test, Loop resistance test 2000A+ Power Supply 6VDC 4 PCS of AA Alkaline batteries Resistance Range 0.01-200Ω Resistance Resolution 0.001Ω Highest Resistance Accuracy ±1%±0.01Ω Data memory 99 Sets Alarm Threshold Setting Range Resistance: 1-199Ω Alarm Sound and Light "Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold. Interference Signal Recognition "Beep-beep-beep" tone, NOISE symbol blinking Working Temperature and Humidity -20℃-55℃；20％RH-90％RH LCD Screen 4 Digits LCD display, Screen L×W: 47mm×28.5mm Clamp Size Φ32mm Clamp Opening Extent 32mm Tester Weight 1160g (With batteries) Clamp Dimension L×W×T: 285mm×85mm×56mm Protection Level Dual Insulation Structural Feature Clamp CT Shifting Automatic shifting External magnetic field ＜40A/m External electrical field ＜1V/m Single measurement time 0.5 second Resistance measurement frequency ＞1KHz Measured current frequency 50/60Hz Automatic measurement Low Battery Indication Low battery symbol displays when battery is lower then 5.3V Memory Full Indication MEM symbol blinks when all 99 sets memory is full Over Range Indication Out of range indication "OLΩ", "L0.01" or "OL A" Auto Power-off 5 minutes after Boot up Power Consumption Max 50mA either in booting up or normally working, Continuously working for 30 hours RS232 Interface (Optional) The data stored in the meter are uploaded to the computer through RS232 interface and data wire, Then generate report files Safety Provisions IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) Accessories Meter: 1 piece, Test ring: 1 Piece, Meter Suitcase: 1 Piece

Manufacturer: Megger Brand: Megger Model: 250579

The Megger 250579 standard ground resistance testing kit is a kit for conducting ground resistance tests with a Megger DET3 or DET4 series ground resistance tester (sold separately). The kit includes three color-coded test leads 8, 15, and 30m (25’, 50’, and 100’) long, two 51cm (20”) ground rods, and a canvas carry case for the leads and rods. The 250579 is an accessory used to perform ground resistance tests with a Megger DET3 or DET4 series ground resistance tester.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Megger Brand: Megger Model: 6310-755

The Megger 6310-755 standard accessory kit set of accessories used in ground resistance testing. It is used with a Megger DET3T or DET4T digital ground resistance tester (sold separately). The kit includes 1.13kg (2.5 lb.) hammer, four 12mm (1.5”) galvanized steel spikes, two spike extractors, and four test leads in a soft carrying case. The 6310-755 is an accessory used perform ground resistance with a Megger DET3T or DET4T digital ground resistance tester.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-1623

The Fluke clip-on current transformer clamp set is used to perform selective or stakeless testing with the Fluke 1623 earth ground tester. Selective testing uses one clamp and stakes to measure earth ground loop resistance values for one ground electrode. Stakeless testing uses two clamps to test ground loop resistance. Both the selective and stakeless methods eliminate the need to disconnect the electrode from the grounding system for increased safety and fewer testing steps. One clamp is voltage inducing, and the other clamp is current sensing. Both clamps have a 50.8mm/2" inside diameter. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: AEMC Brand: AEMC

The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods and can be used in multi-grounded systems. Thanks to its clamp-on capability, it can be used without disconnecting or de-energizing the ground system being tested.

Manufacturer: Amprobe Brand: Amprobe Model: AMPRB-ET4

This kit contains a number of useful accessories for earth testing, and is the perfect accompaniment to many of Amprobe's products.

Manufacturer: Megger Brand: Megger Model: 250576

The Megger 250576-KIT three-piece color-coded test lead set includes one 25' (6 m) test lead, one 50' (15 m) test lead, and one 100' (30 m) test lead and is for use with Megger 250202, DET5/4R, DET5/4D and DET62D testers. The test leads are color-coded to help ensure proper connection.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: CEM Brand: CEM

This is a brand new CEM DT-5300 CE certified digital earth ground resistance tester. This top-of-the-line device replaces the conventional hand generator type tester. This device is ideal for measuring the resistance of grounding on electrical equipments as well as the earth ground conductivity. It can also measures other low regular and liquid resistance as well as AC / DC voltage and resistance up to 200 KOhm. This instrument finds wide applications in the power based industries, telecommunication networks, audio systems and electrical traction systems etc. A heavy duty carrying case is also included for the protection of the device and your convenience.

Manufacturer: Vetus Brand: ETCR

Specifications Function：Return circuit ground resistance, metallic return connection resistance, grounding conditions on-line monitoring Power Supply：6VDC~9VDC, 50mA Max. Resistance Range:0.01Ω～200Ω Resistance Resolution:0.001Ω Display Range:0.00Ω~500Ω Accuracy:±2%rdg±3dgt(20℃±5℃, below70%RH) Working Temperature and Humidity：-20℃-55℃;20%RH-90%RH Grounding Wire Perforation Size：60mm×30mm, closed mode (60mm×4mm steel flat or external diameter 30mm electric cable) Connecting Line:A one meter long wire (5cores shielded wire) Connection Identifier:Red/brown---power supply input anode; Black--- power supply input cathode. Blue---RS485 signal anode; Grey---RS485 signal cathode; White--- analog grounding (power supply input cathode can connects with analog grounding by short circuit connection) Communication Protocol:RS485 standard MODBUS-RTU communication protocol Overflow Indication：When show value is beyond 500Ω, systems software and LCD show "OLΩ" sign. Tester Weight：Detector: 960g Detector Dimensions：175mm×170mm×130mm Installing Screw Hole Size：8mm Shifting：Automatic shifting External magnetic field：