|
|
-
4.0 of 5.0 with 41 Reviews
SALE PRICE: $5,495.00 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 6410-593
Manufacturer: Megger
Brand: Megger
Model: 6410-593
|
The Megger DET2/2 digital ground resistance meter measures earth electrode resistance and soil resistivity to increase the safety and performance of electrical systems. The unit measures digitally and has manually-selected test current, test frequency, and filtering so that it can be used in noisy environments. The meter uses the four-terminal method to eliminate the circuit current resistance for more accurate measurements. The meter measures earth resistance from 0.01 ohms to 19.99 kilohms, with 1 microhm resolution. The alphanumeric LCD display is 35mm x 130mm and gives both test information and test results. The tester is safety rated to European Standards (IEC/EN) 61010-1. It is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The DET2/2 is commonly used by electricians and electrical contractors to help ensure the safety of electrical systems. Specifications Power supply Rechargeable 12V lead-acid internal battery (installed) Ground resistance range 0.01 ohms to 19.99 kilohms Ground resistance resolution 1 microhm Weight (including batteries) 5kg/11 lb. Safety standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Ingress protection (IP) standard met IP54, for protection against dust and splashing water Dimensions 245 x 344 x 158mm/9.6 x 13.5 x 6.25 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Ele...
-
3.9 of 5.0 with 36 Reviews
SALE PRICE: $32.32 1% OFF
Manufacturer: Hioki
Brand: Hioki
Model: 9216
Manufacturer: Hioki
Brand: Hioki
Model: 9216
The Hioki 9216 cable winder holds a measuring cable and is used in ground resistance testing. The winder is an accessory for the Hioki HiTester model 3151. Using a cable winder eliminates tangled cables for organized test equipment and extends equipment life. Hioki manufactures memory recorders, automatic test equipment, and electronic testing and measurement instruments. The company, founded in 1935, is headquartered in Japan and has a U.S. office in Cranbury, NJ.
-
3.9 of 5.0 with 48 Reviews
SALE PRICE: $40.46 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2117.76
Manufacturer: AEMC
Brand: AEMC
Model: 2117.76
The AEMC canvas bag is designed as a carrying case for ground resistance tester accessories. The bag is made from black canvas for durability and closes with a zipper. Measurements are 17 x 6.5 x 2.75 inches (L x W x D). AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.
-
3.9 of 5.0 with 32 Reviews
SALE PRICE: $78.36 1% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: ERT2
Manufacturer: Amprobe
Brand: Amprobe
Model: ERT2
The Amprobe ERT2 Earth Resistance Test Lead Kit is a replacement test lead set for the KMP7010.
-
3.9 of 5.0 with 43 Reviews
SALE PRICE: $190.11 1% OFF
Manufacturer: BOSCH AUTOMOTIVE SERVICE SOLUTIONS
Brand: Bosch
Manufacturer: BOSCH AUTOMOTIVE SERVICE SOLUTIONS
Brand: Bosch
Cylinder Leakage Tester Kit-2Pack.
-
3.9 of 5.0 with 5 Reviews
SALE PRICE: $479.00
Manufacturer: AEMC INSTRUMENTS
Brand: AEMC
Model: 2001509
Manufacturer: AEMC INSTRUMENTS
Brand: AEMC
Model: 2001509
Electronic-components. Qty/ea: 1. BRAND: aemc. Aemc brand items and is made in China. Used widely.
-
3.9 of 5.0 with 34 Reviews
SALE PRICE: $480.00
Manufacturer: Gerneric
Brand: Gerneric
Manufacturer: Gerneric
Brand: Gerneric
|
Power Supply 6VDC 4 PCS of AA Alkaline batteries
Resistance Range 0.01-1200Ω
Resistance Resolution 0.001Ω
Highest Resistance Accuracy ±1%±0.01Ω
Current Range 0.00mA-20.0A
Current Resolution 0.05mA
Highest Current Accuracy ±2.5%±1mA ,
Data memory 99 Sets
Alarm Threshold Setting Range Resistance: 1-199Ω
Alarm Sound and Light "Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.
Interference Signal Recognition "Beep-beep-beep" tone, NOISE symbol blinking
Working Temperature and Humidity -20℃-55℃;20%RH-90%RH
LCD Screen 4 Digits LCD display, Screen L×W: 47mm×28.5mm
Clamp Size Φ32mm
Clamp Opening Extent 32mm
Tester Weight 1160g (With batteries)
Clamp Dimension L×W×T: 285mm×85mm×56mm
Protection Level Dual Insulation
Structural Feature Clamp CT
Shifting Automatic shifting
External magnetic field <40A/m
External electrical field <1V/m
Single measurement time 0.5 second
Resistance measurement frequency >1KHz
Measured current frequency 50/60Hz Automatic measurement
Low Battery Indication Low battery symbol displays when battery is lower then 5.3V
Memory Full Indication MEM symbol blinks when all 99 sets memory is full
Over Range Indication Out of range indication "OLΩ", "L0.01" or "OL A"
Auto Power-off 5 minutes after Boot up
Power Consumption Max 50mA either in booting up or normally working, Continuously working for 30 hours
RS232 Interface (Optional) The data stored in the meter are uploaded to the computer through RS232 interface and data wire, Then generate report files
Safety Provisions IEC1010-1, IEC1010-2-032, Pollution level 2, CAT â…¢(600V)
Accessories Meter: 1 piece, Test ring: 1 Piece, Meter Suitcase: 1 Piece
-
3.9 of 5.0 with 6 Reviews
SALE PRICE: $599.05 1% OFF
Manufacturer: Kyoritsu
Brand: Kyoritsu
Model: 4102A-H
Manufacturer: Kyoritsu
Brand: Kyoritsu
Model: 4102A-H
|
The Kyoritsu 4102A-H tester performs three-pole earth resistance and two-pole voltage testing of electrical equipment and systems wiring and grounding to reduce power quality issues and avoid safety hazards. The meter is small and lightweight, with shock-resistant case material and taut-band movement. The OK light verifies proper connection between auxiliary earth resistance and lead wire connection to terminals. The tester warns the user when the resistance of auxiliary earth spikes exceeds tolerance. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing. The Kyoritsu 4102A-H has an IP 54 rating for limited ingress of dust and protection against water splashes and drips. Safety ratings are CE compliant, designed to safety standard IEC 61557, and rated as CAT III 300V. The test kit includes set of three test leads (red 20m, yellow 10m, green 5m), one set of measurement probes, two auxiliary earth spikes, neck strap, and a hard carrying case that holds the instrument and all testing accessories. Specifications Earth resistance range 0-12Ω/ 0-120Ω /0-1200Ω Earth voltage range 0-30V AC (50, 60Hz) Accuracy + or - 3% full scale Withstand voltage 3700V AC for 1 minute Power source (6) R6P (AA) 1.5V batteries (included) Weight 600g Dimensions 105 x 158 x 70mm (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and clamp models. Grounding systems protect people and equipment, and provide a safe path for the dissipation of fault currents, lightning strikes, static discharges, EMI and RFI signals, and interference. Regular testing of a grounding system is important for safety and protection of equipment. For example, corrosive soil with h...
-
3.9 of 5.0 with 38 Reviews
SALE PRICE: $865.00
Manufacturer: Megger
Brand: Megger
Model: DET3TD
Manufacturer: Megger
Brand: Megger
Model: DET3TD
|
The Megger DET3 digital ground resistance meter measures ground resistance, voltage, and current for digital ground and bond testing to increase the safety and performance of electrical systems. The unit measures digitally, is autoranging, and has user-selectable 25 or 50V test voltages. The noise rejection feature filters out noise up to 40V peak to peak for more accurate testing in high-noise environments. The meter measures voltage from 0 to 100V, ground current from 0.5mA to 19.9A, and ground resistance from 0.01 to 2000 ohms. The LCD display indicates test results and the status of the batteries for ease of use. The tester is safety rated to European Standards (IEC/EN) 61010-1, Category IV 100V. It is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The DET3 is commonly used by electricians and electrical contractors to help ensure the safety of electrical systems. Specifications Power supply (8) AA batteries Voltage range 0 to 100V Ground current range 0.5mA to 19.9A Ground resistance range 0.01 to 2000 ohms Weight (including batteries) 1kg/2.2 lb. Safety standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 100V Ingress protection (IP) standard met IP54, for protection against dust and splashing water Dimensions 203 x 148 x 78mm/8 x 5.7 x 3.2 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties...
-
3.9 of 5.0 with 17 Reviews
SALE PRICE: $3,185.00
Manufacturer: Megger
Brand: Megger
Model: 1000-404
Manufacturer: Megger
Brand: Megger
Model: 1000-404
|
The Megger DET4TC2 four-terminal ground resistance tester with professional ground testing kit measures earth ground resistance, soil resistivity, and ground voltage to evaluate the safety and integrity of electrical systems. The tester offers a choice of 2-, 3-, or 4- pole ground resistance testing. It can take measurements using the attached rod technique (ART), which tests on-site grounds without requiring the utility connection to be disconnected. It comes with a current clamp for measuring conductor current and electrode resistance and a voltage clamp for stakeless ground measurements, and when used with ART capability, the clamps can be used for taking fall of potential measurements. The clamps have two jaws that can accommodate a conductor up to 2.1" (52 mm) in diameter. The tester has a maximum resistance input of 200,000 ohms for testing the resistivity of a range of soil types. The tester's voltmeter displays the ground voltage during use, which helps increase operator safety. The operator can choose between 25V or 50V test voltage output, allowing the tester to be used in agricultural applications. For accurate readings in noisy environments, the tester can filter out ground voltage noise up to 40 volts (V) peak-to-peak. The DET4TC2 comes with a professional ground testing kit that includes two 164' (50 m) leads and two 98' (30 m) leads on retractable reels, four auger-style ground spikes, a tape measure, and a separate hard carry case for transporting and storing the kit. It also comes with one 49' (15 m), two 33' (10 m), and one 10' (3 m) test leads, four ground stakes, four right-angle terminal adaptors, a field calibrator for measurement accuracy, and one voltage and one potential clamp. The tester's liquid crystal display (LCD) is backlit for readability in low light.The DET4TC2 meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 100V, which covers measurements at the source of the low-voltage supply, such as electricity ...
|
|