Electrical Testing - Page 248

Manufacturer: Made in usa Brand: awasy2415

NEW AND USED!!!MOST OF THEM ARE NEW!!!(GROUND1-9-8)Exported By ExportYourStore

Manufacturer: Ideal Industries Brand: Ideal Industries Model: 61-092

Tests for high voltage up to 600VAC/200VDC. Tests for low voltage as low as 24VAC6VDC. Low impedance to eliminate ghost voltages. Replacement silicone test leads

Manufacturer: Rosemount Brand: Rosemount

Rosemount Thermocouple & Connection Head 00079-0325-0002, 00079-0335-0002 Rev B

Manufacturer: Smart Meter Brand: Smart Meter

Application: Installation, debug and repair for refrigeration industry, ventilation duct, environment monit-or, navigation measurement, weather forecast, collection of the weather datum for outdoor busywork and fire department. *This portable anemometer provides fast accurate readings, with digital readability and the convenience of a remote sensor separately. * Multifunctional. The measurement unit can be selected according to different requirements,m/s, km /h, ft/min, knots. * Low-friction ball-bearing design allows free vane movement, resulting in accuracy at both high & low velocities. * A sensitive balanced vane wheel rotates freely in response to airflow. * Conventional twisted vane arms, always a source of unreliability has been eliminated. * DATA HOLD function for storing the desired value on display to read. * LCD display for low power consumption & clear readout even in bright ambient light condition. * Used the durable, long-lasting components,including a strong, light weight ABS-plastic housing case. * Low battery indication. * Wide applications: use this anemometer to check air conditioning & heating systems,measure air velocities, wind speeds. Specification: *Display:10mm(0.4") 4-digits LCD *Measurement Units:m/s (meters per second) km/h (kilometers per hour) ft/min (feet per minute) knots (nautical miles per hour) *Operating Conditions:Temperature:0~50°C (32~122°F ) Humidity:

Manufacturer: AZ Brand: AZ Model: AZ8684

*Big LCD with dual display *IP65 water proof *pH/ Temperature dual display *Measuring stability indicator *One touch auto-calibration up to 3 points *Calibration values are adjustable *20 mins auto power off *Simple sleep mode disable operation *Data hold function *Battery low indicator *Temperature unit selectable *Cap to keep sensor wet & last life time *pH range:2.0~12.0 *pH accuracy:+/-0.3 *pH resolution:0.1 *LCD size:30(H)x18(W)mm *Operating temp.:0~50 C *Operating RH%:Humidity < 80% *Storage temp.:-10~50 C *Storage RH%:Humidity < 90% *Sensor life time:>6 months (with good maintenance) *Dimension:165(L)x35(W)x32(H)mm *Weight:115g

Manufacturer: HUA YI YI BIAO Brand: GAOSHUO Model: MS5908 Color: Green

Prdocut Description: This circuit analyzer is a special test device designed for AC low-voltage distribution line quick fault location. With simple operation, accurate measurement and other features, it can detect multiple problems on a line, such as causing to electric shock, electrical fire, abnormal operation of equipment, etc. Features: 1.TRMS measuring AC voltage 2.Measuring phase voltage, neutral line (zero line) voltage to earth, peak voltage, frequency 3.Measuring phase (live line), neutral line (zero line), earth line conductor impedance 4.Identifying 3-wire socket connection mode (zero for left and live for right, having earth line or not) 5.Test the reliability of residual current device (RCD) and response action time 6.Test the reliability of GFCI action and response action time 7.Backlight function and data hold function Measurement Ranges Resolution Accuracy Line Voltage 85.0-265.0V 0.1V +-(1.0%+ 0.2V) Peak Line Voltage 121.0-374.0V 0.1V +-(1.0%+ 0.2V) Frequency 45.0~65.0Hz 0.1Hz +-(1.0%+ 0.2Hz) % Voltage Drop 0.1%~99.9% 0.10% -0.027 Voltage Loaded 10.0~265.0V 0.1V +-(2.5%+0.2V) Neutral-Ground V 0.0~10.0V 0.1V +-(2.5%+0.2V) Impedance-Hot Neutral& Ground 0.00~3.00ohm 0.01ohm +-(2.5%+0.02ohm) >3.00ohm RCD Trip Time 1ms~6.500s 1ms +-(1.0% +2ms) RCD Trip Current 30mA~37mA 0.1mA +-(1.0% +0.2mA) GFCI Trip timer 1ms~6.500s 1ms +-(1.0% +2ms) GFCI Trip Current 6mA~9mA 0.1mA Packing content: 1 X MS5908 Circuit Analyzer 1 X power plug (EU plug) 1 X black bag

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8148

Kyoritsu 8148 leakage and load current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. Rated current 100A AC. 68mm conductor size. Output voltage: AC 5000mV/100A (AC 50mV/A). Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 3540V AC for 5 seconds. Approximate 2m cable length. Approximate 60 ohm output impedance. Accessories includes: portable case, instruction manual, cable marker. Measures 186 mm length by 129 mm width by 53mm depth.

Manufacturer: KKmoon Brand: KKmoon

Specifications: Display: LCD with backlight Max. Display: 4000 Sampling Rate: Approx.3 times/s Sensor: Coil Induction(UT213A/B) or Hall Effect Sensor(UT213C) Max. Dimension of Jaw Opening: Dia.30mm AC Current: 4.000A/40.00A/400.0A(UT213A/B) 40.00A/400.0A(UT213C) DC Current: 40.00A/400.0A(only for UT213C) AC Voltage: 4.000V/40.00V/400.0V/600V DC Voltage: 400.0mV/4.000V/40.00V/400.0V/600V Resistance: 400.0Ω/4.000kΩ/40.00kΩ/400.0kΩ/4.000MΩ/40.00MΩ Capacitance: 50.00nF/500.0nF/5.000μF/50.00μF/100.0μF(UT213A) 40.00nF/400.0nF/4.000μF/40.00μF/4.000mF/40.00mF(UT213B/C) Temperature: -40~40°C/40~400°C/400~1000°C(Meter) -40~300°C(Probe) (UT213B/C) Continuity Test Range: 400.0Ω Power Supply: 3 * 1.5V AAA Batteries(not included) Item Size: 22 * 7 * 3cm / 8.66 * 2.76 * 1.18in Item Weight: 251g / 8.86oz(UT231A) 241g / 8.50oz(UT231B) 221g / 7.79oz(UT231C) Package Size: 27 * 9 * 5.5cm / 10.63 * 3.54 * 2.17in Package Weight: 440g / 15.54oz(UT231A) 443g / 15.63oz(UT231B) 425g / 14.99oz(UT231C)What is included: 1 * Clamp Meter 1 * Pair of Test Probe 1 * Temperature Measuring Probe(only for UT213B/C) 1 * Bag 1 * User Manual

Manufacturer: Probe Master Brand: Probe Master Model: 4905-4RA

Oscilloscope probe with readout actuator, 150MHz, 10X, 600V, 10ft, BASIC KIT

Manufacturer: ZhuHai JiDa HuaPu Instrument Co.,Ltd Brand: HoldPeak

This digital insulation tester is an ideal instrument that can be used in testing insulation of electric machines, cables, electronic equipment, electric facilities, etc. Its main features include: easy to operate, wide test range, highly stable performance, backlit LCD display, data hold, back light and auto power off. Using a shoulder strap, it can be used by both hands. Text range: DC Voltage: 600mV～1000V AC Voltage: 600mV～750V DC Current: 20A AC Current: 20A Resistance: 600 ohm～60M ohm Temperature: -20℃～1000℃ Special function: Continuity alarm: Less than 50Ω±10Ω Data hold: Yes LCD backlight: Approx 10Sec. Function protection: Yes Low Battery Indication: Yes Input impedance: 10MΩ Sampling rate: 3 times/Sec. AC frequency response: 40-400Hz Operation mode: Auto range Max display: 6000 Power source: 1 x 9V 6F22 battery(Included) Package Content: 1 x Digital Insulation Tester 2 x Test lead 1 x Shoulder strap 1 x 9V 6F22 battery (Note: Sometimes we put the batteries in the battery compartment directly, please reposition the batteries correctly before you use.) 1 x User Manual