|
|
-
4.4 of 5.0 with 37 Reviews
SALE PRICE: $535.70 11% OFF
Manufacturer: Fotronic Corporation
Brand: Pro-Tek
Model: G632
Manufacturer: Fotronic Corporation
Brand: Pro-Tek
Model: G632
The Protek G632 is a sweep generator in which the sweep rate is matched to that of the spectrum analyzer. The output circuitry of the tracking generator contains a network that ensures a constant output amplitude over the entire range being swept.
-
4.4 of 5.0 with 17 Reviews
SALE PRICE: $539.00 15% OFF
Manufacturer: Hantek
Brand: Hantek DSO
Manufacturer: Hantek
Brand: Hantek DSO
|
DSO8060 Five-in-one Handheld Oscilloscope. Oscilloscope/DMM/ Spectrum Analyzer/Frequency Counter/Arbtrary Waveform generator. High Bandwidth 60MHz Oscilloscope, and 6000 COUNTS high precision DMM. Seperated GND Reference. Hardware Frequency Counter. Arbitrary Waveform Generator: 25Mz arbitrary waveform output, (sine wave can deliver up to 75 Mz) 200 MSa/s DDS, 12 bits of vertical resolution. FFT , + , - , * , / ,X-Y, 22 kinds of auto measurements, PASS/FAIL Check, easy to use on production line. High refresh rate; High Real-time Sample Rate 150MSa/s-2GSa/s; 50GSa/s Equivalent-time Sample Rate. Multiform trigger mode, 2 separate time base in ALT trigger mode, easy to see 2 signal with different frequency. 1000 waveforms save and record. Excellent Industrial Design. Direct key for Each Channel, time base, Trigger and DMM, easy to operate. Large 5.7 inch TFT Color LCD Display, LED backlight, Display clearly. USB Host/Device 2.0 full-speed interface, support removeable disk, LAN Option; Easy to control by PC or long-distance. Battery Power Operation (Installed) Industrial Design. Save waveform in the following: jpg/bmp graphic file, MS excel/word file. Dimensions (mm):240(L)x165(W)x50(H), be carried easily. Labview\VB\VC Second Design instance.
-
4.4 of 5.0 with 21 Reviews
SALE PRICE: $539.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2540445
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 2540445
Fluke a clip-on current transformer. Measuring range selectable per software: 0.01 A to 1 A and 0.1 A to 10 A. Peak current for sinusoidal currents: 3.7 A and 37 A. Intrinsic error: 0.5 percent. Frequency range: 40 Hz to 10 kHz. Operating voltage: 300 V CAT IV. Phase error: 0.5 degree. Jaw opening: less-than 15-millimeters diameter or 15-millimeters by 17-millimeters bus bars.
-
4.4 of 5.0 with 42 Reviews
SALE PRICE: $543.79
Manufacturer: Sperry
Brand: Sperry Top-Sider
Manufacturer: Sperry
Brand: Sperry Top-Sider
Sperry 4102MOV Analog Earth Resistance Tester.
-
4.4 of 5.0 with 7 Reviews
SALE PRICE: $546.00 1% OFF
Manufacturer: SIGLENT
Brand: Siglent
Model: SDS1202CNL+
Manufacturer: SIGLENT
Brand: Siglent
Model: SDS1202CNL+
|
SIGLENT SDS1202CNL+ Digital Oscilloscope is a compact desktop dual-channel digital oscilloscope with a 200 MHz bandwidth. 7-inch TFT color liquid-crystal display of the oscilloscope ensures bright and vivid waveform representation and backlit buttons ensure user comfort. SIGLENT SDS1202CNL+ has a multi-language user interface and online help.
SIGLENT SDS1202CNL+ Digital Oscilloscope is a good choice for industrial control and measurements, R&D, electronic circuit design and testing and all other applications involving testing and troubleshooting, as well as education and training.
Technical Specifications:
Bandwidth 200 MHz
Channels 2 + 1 ext. ch.
Real time sample rate 2 GSa/s
Equivalent sample rate 50 GSa/s
Memory depth 18 Kpts
Vertical sensitivity range 2 mV/div - 5 V/div
Vertical resolution 8 bits
Rise time ≤3.5 ns
Time base range 2.5 ns/div - 50 s/div
Input impedance 1 MΩ || 17 pF
Cursor measurements Manual, Track, Auto measure
Math Add, Subtract, Multiply, Divide, FFT
Trigger modes Edge, Pulse, Video, Slope, Alternate
Storage Internal: 20 setups, 20 waveforms (storage/recall), 2 reference waveforms
External (USB): BMP, CSV, waveforms and setups
Input coupling DC, AC, GND
General Characteristics
Display 7" (178 mm) TFT color LCD (480 × 234)
Interface USB Host, USB Device, RS-232, P/F output
Power source AC 100 ~ 240 V, 45 ~ 440 Hz, 50 VA Max
Max. input voltage 1 MΩ 17 pF 400 V (DC + PK-PK) CATI, CATII
Weight 2.5 kg
Dimensions 305 × 133 × 154 mm
Multi-language display (12 languages): English, French, Spanish, Portuguese, German, Italian, Russian, Arabic, Japanese, Korean, Simplified Chinese, Traditional Chinese
-
4.4 of 5.0 with 10 Reviews
SALE PRICE: $549.99
Manufacturer: Micsig
Brand: Micsig
Manufacturer: Micsig
Brand: Micsig
|
Overview: Micsig Handheld oscilloscope TO1102 is the hobbyists' favorite on line shop because of super cost effective. It uses double injection plastic mould making oscilloscope high IP level and giving you better handling experience; And it weighs light so that you won't feel tired to use it. Besides, exclusively detachable battery design makes you no any worry in field testing. What's worth mentioning that it uses 8 inches 800*600 pixels industry TFT LCD touch screen & supports button, touch and scroll wheels operation mode; Integrating scope, meter & recorder in one unit and unique scroll wheel & touch designs making handheld operation more convenient; Rapid response of operation system & online built-in helping menu making your testing work really easy & high efficient. Features:    •Model: TO1102    •Bandwidth:100MHz    •Input Channel: 2    •Sample rate: 1GSa/S    •Memory depth: 28Mpts    •Max capture rate: 80,000 wfm/s    •Bandwidth limitation: 20MHz, high pass, low pass    •Interface: Wifi, LAN, HDMI,USB Host, USB Device, GND, DC Power, Trigger out    •Screen 8 inches TFT LCD 800*600 pixels display resolution,14*10 display range    •Dimension: 250*210*55mm    •Battery: 8,000mAh Li-ion battery Package list: 1x TO1102 oscilloscope 1x Battery 1x Carry Strap 1x Screen Mask
-
4.4 of 5.0 with 29 Reviews
SALE PRICE: $574.58 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 8220
Manufacturer: AEMC
Brand: AEMC
Model: 8220
|
The AEMC 8220 single-phase multimeter (also known as a multitester) measures electrical parameters and distribution network parameters including voltage, current, power, and harmonics; and monitors parameters of operating machinery including temperature, inrush current and duration of operation, distance of windings, and rotational speed. It is designed for use by technicians, control and maintenance engineers, electrical contractors, and educators. A continuity test confirms a circuit conducts electricity, and a diode test detects correct functioning of a circuit's diodes. Measurements include kW, kVAR, PF, DPF, kWh, KVARh, kVAh, and VA. The meter displays crest factor, peak, K-factor, and minimum, maximum, and average volts and amps. It calculates and displays watts, VAR and VA, power factor (PF), and displacement power factor (DPF) for single-phase and balanced three-phase systems. The meter can store up to nine sets of reading totaling up to 99 snapshots for volts, amps, power, and harmonics. Data can be transferred to a computer using the optical USB port and the DataView software (included). This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. The meter has auto- and manual-ranging modes. In auto-ranging mode the meter automatically selects the correct operating range for the property being measured. The three-line backlit color LCD has adjustable brightness and contrast for use in a variety of lighting levels. The meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC po...
-
4.4 of 5.0 with 38 Reviews
SALE PRICE: $578.00 1% OFF
Manufacturer: Micsig
Brand: Micsig
Model: TO202I
Manufacturer: Micsig
Brand: Micsig
Model: TO202I
|
If you want to find a super cost effective digital oscilloscope, Tablet Oscilloscope tBook TO**I series are your first choice. As an oscilloscope hobbyist, it is absolutely what you can't miss. tBook redefines oscilloscope operation experiences; It'll perfectly measure and display waveform in your tablet oscilloscope with touching or sliding by finger gesture; Opening 31 auto measurements in one time; Saving waveforms in one shortcut icon; Swiping downward with three fingers to rapidly open ZOOM & with four fingers instantly to get a screenshot; Built-in 4GB hard disk, Supporting waveform to be viewed locally; Positioning waveform will rapidly be adjusted as the fingers move and all of those will bring you completely new oscilloscope experience. 200MHz bandwidth; 1GSa/s sample rate; Up to 3.6Mpts memory depth; Up to 50,000wfm/s capture rate; 2 or 4 input channels; 1024*600 pixels display resolution; 10.1 inches full touch capacitive screen.
-
4.4 of 5.0 with 2 Reviews
SALE PRICE: $581.00 1% OFF
Manufacturer: Keysight Technologies
Brand: KEYSIGHT TECHNOLOGIES
Model: N6732B
Manufacturer: Keysight Technologies
Brand: KEYSIGHT TECHNOLOGIES
Model: N6732B
The Keysight N6732B is a 50 W basic DC power module that provides programmable voltage and current, measurement and protection features at a very economical price, making these modules suitable to power the DUT or to provide power for ATE system resources such as fixture control. This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W. Programming Accuracy (at 23°C ±5°): -Voltage: 0.1% + 19 mV -Current: 0.15% + 20 mA Ripple & Noise (20 Hz to 20 MHz): -Voltage rms: 2 mV -Voltage peak-to-peak: 12 mV -Current rms: 4 mA
-
4.4 of 5.0 with 22 Reviews
SALE PRICE: $585.00
Manufacturer: Megger
Brand: Megger
Model: 250581
Manufacturer: Megger
Brand: Megger
Model: 250581
The Megger 250581 deluxe ground testing kit is a kit for conducting ground resistance tests with a Megger DET3 or DET4 series ground resistance tester (sold separately). The kit includes three color-coded test leads 8, 15, and 30m (25’, 50’, and 100’) long, two 51cm (20â€) ground rods, and a padded canvas case for the instrument, leads, and rods. The 250581 is an accessory used to perform ground resistance tests with Megger DET3 and DET4 series ground resistance testers.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
|
|