Electrical Testing - Page 596

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-54-2 B 60HZ

The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40" cables that measure from -40 to +260 degrees C (-40 to +500 degrees F). It can store up to 500 points of data for analysis and monitoring, and it has an infrared communication port for exporting data to a computer for analysis. This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset function that allows the operator to compensate for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it comes in a holster that absorbs impact to help protect against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactivity to help preserve battery life. It conforms to National Institute of Standards and Technology (NIST) standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial and manufacturing environments. Specifications Type K temperature range -200 to +1372 degrees C (-328 to +2501 degrees F) Type J temperature range -210 to +1200 degrees C (-346 to +2192 degrees F) Type T temperature range -250 to +400 degrees C (-418 to +752 degrees F) Type E temperature range -150 to +1000 degrees C (-238 to +1832 degrees F) Type N temperature range -200 to +1300 degrees C (-328 to +2372 degrees F) Type R and Type S temperature range 0 to 1767 degrees C (32 to 3212 de...

Manufacturer: AEMC Brand: AEMC Model: 2151.23

Lead – One Shielded Safety Lead (Red) 45 Feet with Hippo Clips (15kV) for Megohmmeter Models 6550 and 6555.

Manufacturer: GW Instek Brand: GW Instek Model: GDS-1102-U

The Instek GDS-1000-U series is a two-channel, portable digital oscilloscope with a maximum real-time sample rate of 250MS/s, a record length of 4 kpts, auto-set function, advanced triggering, two basic math functions and FFT, 19 measurement parameters, an internal memory for data storage, data logging, and USB connectivity for electronics applications such as such as product design, assembly lines, repair and servicing, and electrical engineering, among others. The sample rate and record length enable long capture times for displaying detailed waveforms. An auto-set function automatically configures the optimum settings for displaying waveforms by selecting the horizontal and vertical scales, positioning the waveform horizontally and vertically, and selecting and activating the trigger source channel. In addition to an edge trigger, the unit has pulse width and video triggers for isolating a specific signal. Two basic math functions—add and subtract—plus FFT (fast fourier transform) and 19 measurement parameters such as average, frequency, and peak-to-peak allow an in-depth analysis of waveforms. A go/no go test function promptly indicates when a signal falls outside user-defined settings, and a zoom function magnifies details of waveforms. Up to 15 waveforms or 15 setups can be stored in the internal memory of the oscilloscope. A data logging function tracks data at user-defined timed intervals for up to 100 hours, logging the data on a USB flash drive (sold separately). Additional specifications include a rise time of 7ns for the 50MHz model, 5ns for the 70MHz model, and 3.5ns for the 100MHz model, and various triggering features. The oscilloscope has a 5.7" color TFT (thin film transistor) LCD with a resolution of 320 x 234 pixels and can show simultaneously show up to two live and two stored waveforms. The oscilloscope has a USB host port for connecting a flash drive (sold separately) to store data and a USB device port for connecting to a PC for storing data and remote operation. The unit meet...

Manufacturer: T&O Brand: Toto

Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Mounting hardware.

Manufacturer: Extech Brand: Extech Model: 380460

View larger 110V Precision Milliohm Meter Compact and precise, the Extech 380460 Milliohm Meter has 5 ranges and measures down to 0.1 milliohms using 4-wire Kelvin clip test leads. Measurements are displayed on the unit's large 0.7-inch 1999 count LCD. Other Features A durable field service housing with protective cover, overrange indication and manual zero display adjust. Operates on 110VAC 60 Hz and comes complete with 4-wire cables with Kelvin clip connectors. CAT II-230V safety category. What is a MilliOhm? The units of measure for resistances less than 1 Ohm (Ω) are Milli- (mΩ) and Micro-(μΩ)Ohms. One MilliOhm (1mΩ) is equal to one thousandth of an ohm (0.001). One MicroOhm (1μΩ) is equal to one millionth of an ohm (0.000001). For example, 0.5 ohms (one half an ohm) is equal to 500mΩ. Why bother measuring resistances so low? It may seem like too small a resistance to be of any consequence but many safety standards (UL, CSA, VDE, etc.) require that such resistances be measured during the manufacture of consumer products, hand tools, and many appliances. A good example is the testing of kitchen appliances. Why are 4-wire connections required when making milliohm measurements? Test leads always introduce a small amount of additional resistance into a measurement. This is acceptable in non-critical measurements such as megohm resistances. However, when measuring milliohms in a critical application, any additional resistance can render the measurement useless. This is why 4-wire (Kelvin) connections are imperative. More Extech Instruments to Choose From View larger 380462 220-Volt Precision Milliohm Meter Precision Milliohm Meter has 5 ranges and measures down to 0.1 milliohms using 4-wire Kelvin clip test leads. Measurements are displayed on the large 0.7-inch 1999 count LCD. Additional features include a durable field service housing with protective cover, overrange indication and manual zero display adjust. Operates on 220 VAC 50 Hz and c...

Manufacturer: GW Instek Brand: GW Instek Model: GDS-2072A

The GW Instek GDS-2000A series digital storage oscilloscope (DSO) has Waveform Search and Segmented Memory for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education. It has a vertical sensitivity to 10mV per division for the full bandwidth and 1mV per division when the gain control is engaged for capturing low-level signals. The series has bandwidth range from 70 to 300MHz and two to four channels with a single-channel sample rate range of up to 2GS/s. Events captured and saved into Segmented Memory can be divided into 2,048 sections for observation, increasing memory usage efficiency. Waveform Search mode marks waveform sections that comply with a user-defined search condition and threshold level. Triggers include Edge, Pulse Width, Video, Runt, Slope, Alternate, Event-Delay, and Time-Delay. The oscilloscope has an 8" color TFT-LCD (800 x 600 pixels) with an internal 8 x 10 division grid for viewing waveforms. This digital storage oscilloscope is European Conformity (CE) approved and CAT I 300V safety rated.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provide real-time intensity grading. Some oscilloscopes have the ability to adjust frequency of display. A constant image will display if a signal is shown at a high frequency. Oscilloscopes can be powered with batteries or...

Manufacturer: Owon Technology Co., Ltd Brand: OWON

The Owon VDS3104L 4+1 Channel Virtual Oscilloscope is an oscilloscope that can connect directly with PCs through a USB connection. Accommodates users with 100 MHz of bandwidth, 1 GSa/s real-time sample rate, and multiple trigger modes - edge, video, slope, pulse, and alternate. Its USB powering facilitates mobile tests under powerless conditions. Additionally, this version comes with a LAN port. The VDS3104-L comes included with a power cord, software disc, 2 probes and an adjustment tool, usb cable, power adapter, silicon gel case, and a users manual. Friendly UI: FFT, or X-Y, and waveform 2 views displayed on the same screen Multi-trigger option: edge, video, slope, pulse, and alternate USB isolation - less signal inference, more PC protection USB bus powering Ultra-thin body design, easy portability

Manufacturer: AFL/Noyes Brand: AFL/Noyes Model: CSM1-1

CSM1 Palm-sized Optical Power Meter The palm-sized CSM1 optical power meter accurately measures optical power in Premises Telco or Broadband fiber optic networks. Weighing only 0.4 lb this power meter is ideal for field use. The CSM1 stores optical references for each calibrated wavelength and features multiple test Tone detection for fiber identification. A large LCD display with backlight shows measured power [dBm or W] or insertion loss [dB] calibrated wavelengths [nm] tone frequency [Hz] and indicates a low battery condition. The CSM1 optical input port accepts a variety of NOYES thread-on style adapter caps (ordered separately) to meet a wide range of testing requirements. One adapter cap 2.5 mm Universal is included. Powered by two AA alkaline batteries the CSM1 offers a five-minute auto-off feature and over 300 hours of operation with backlight off. The CSM1 is fully N.I.S.T. traceable.  Noyes CSM 1 Power Meters PDF [658 KB]

Manufacturer: Owon Technology Co., Ltd Brand: OWON

The Owon SDS7122E is a 2+1 Channel Digital Storage Oscilloscope with 125 MHz bandwidth, 1 GS/s sample rate, and 8 inches (800x600) color TFT-LCD screen all in an ultra-thin body. Includes AutoScale function to simplify the operation. The Owon SDS7122E includes 2 probes, USB cable, software CD, probe adjust pen, power adapter and user manual. Pass / Fail function Add / Remove measure function, and user-defined measurement menu

Manufacturer: Hantek Brand: Hantek Color: 70MHZ

This digital oscilloscope probe is professional oscillometer and very practical for testing the electric current and voltage. The oscilloscope can put the invisible to the naked eye the electrical signals into visible image, convenient for people to study the changing process of various electrical phenomena.Note: Hantek DSO5072P Digital Oscilloscope is for 3 years Warranty！ Please read the instruction manual data CD carefully to avoid injury and prevent damage to this product.Specifications: Material: ABS Bandwidth: 70MHz / 100MHz (Optional) Plug Type: US / EU (Optional) Oscilloscope Probe Model: PP-90 Length of the Powerline: Approx. 150cm / 59.1in  Length of the USB Line: Approx. 107cm / 42.1in Length of the Probe Line: Approx. 130cm / 51.2in Size of the Oscilloscope Body: Approx. 31.5 * 13 * 15.2cm / 12.4 * 5.1 * 6.0in (L * W * H) Oscilloscope Weight: 2.01kg/ 4.4lb Package Size: Approx. 38.5 * 19.5 * 24cm / 15.1 * 7.7 * 9.4in Package Weight: 2.87kg/ 6.3lb  (2870.4g/101.2oz)    Package List: 1 * Digital Storage Oscilloscope 2 * Oscilloscope Probe 1 * Oscilloscope Powerline 1 * Hantek Data CD 1 * USB Line