Electrical Testing - Page 614

Manufacturer: Pomona Electronics Brand: Pomona Model: 1166-24-0 Color: Black

: Hands free testing in controlled voltage environment: 150V; For CE compliance: not intended for hand held use at voltages above 33 Vrms/70 Vdc, 5A, +122ËšF (+50ËšC) max.

Manufacturer: Amprobe Brand: Amprobe Model: BAT-100

The Amprobe BAT-100 battery tester indicates the amount of charge remaining in standard and rechargeable batteries. It has an adjustable, hinged terminal contact caliper for testing 1.5V AA, AAA, C, D, and button batteries, and separate terminal contacts for testing 9V batteries. An analog display has a needle that moves on a color-coded, calibrated scale to quickly identify "good" (green), "low" (yellow), and "replace/recharge" (red) battery states. The meter measures 4.21 x 3.03 x 1.02 inches/107 x 77 x 26 mm (H x W x D) and can be held in one hand during use. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) It weighs 0.09lb/40g. The meter conforms to applicable European Conformity (CE) directives and N10140 Australian standards. Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA. What’s in the Box? BAT-100 Tester Instructions

Manufacturer: Made in usa Brand: SPIRAX SARCO

NEW OLD STOCK W/O BOX(YD3-4-6)Exported By ExportYourStore

Manufacturer: POMONA Brand: Pomona

POMONA 72922-2 TEST JACK, 10A, SOLDER TAB, RED

Manufacturer: Pomona Electronics Brand: Pomona Model: 4723-0 Color: Black

Manufacturer: Mastech Brand: Tekpower Model: TP5000 Color: TP5000

Tekpower TP5000, 6000 Counts True RMS AC/DC Auto Range Digital Multimeter With Relative Measurement,USB Connection to PC, Bar Graph and Temperature for General Purpose¡­

Manufacturer: Coil Master Brand: Coil Master Model: 521 Color: Black

Coil Master Multi-Functional 521 Tab Features: Ohm Meter Voltage Checker Coil Rebuilding Deck Test-Fire Attys Reverse Battery Protection Resistance Measurement Range: 0.01 - 9.99 ohm Voltage Measurement Range: 0.3 - 9.99V Min Resistance Rate: 0.2 ohm Spring Loaded 510 Connection Pin MicroUSB Charging Port 18650 Battery not included Includes: 1 Coil Master 521 Tab 2 Terminal Connectors 1 Voltage Checker 1 MicroUSB Charger Instruction Manual This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Manufacturer: Icstation Brand: Generic

LCR-T5 digital multi tester support resistor,diode,SCR,capacitor,inductance,MOS transistor testing. 128x64 backlight LCD screen display the meausuring result with fast meauring speed only 2 seconds in most measurement .Built-in rechargeable battery with white ABS case portable enable the user take it out for long time working perfect for sorting your salvaged components or PCB repair. Function: -Boot voltage detection function -Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components, -Automatic test out the components pins then display it on the screen -Test bipolar transistor current amplification factor and emitter junction threshold voltage -Test MOSFET gate threshold voltage and gate capacitance -Built-in rechargeable li-lion battery with USB powr port,ensure long time working -Compact size with ABS case, easy to carry Specification: Working Voltage: DC 9V Display:128X64 LCD Rasistor Testing Range:0.1 ohm - 50M ohm Capacitor Testing Range:25pf-100mF Package included: 1X LCR-T5 Transistor Tester Note:The display language is English.Due to this meter has battery included we will ship it out by Singaport post, it usually take 15-30 days to your home.

Manufacturer: GE Yokogawa Brand: GE

Ge Yokogawa Type 185 Panel Meter 50-0-50 Dc Milliamperes

Manufacturer: OMRON Brand: Omron

[Operation/resetting system]Time-limit operation/self-resetting [Time-limit contact]4PDT [Supply voltage]100 to 120VAC(50/60Hz) [Mounting]Surface/DIN-track mounting(with socket) Time Ranges [Rated time]10 min [Time setting range]0.5 to 10 min [Item] H3Y-4 [Rated supply voltage *6 *7] 100 to 120VAC *1 [Operating voltage range] All rated voltages except 12 VDC: 85% to 110% of rated supply voltage 12 VDC: 90% to 110% of rated supply voltage *4 [Reset voltage] 10% min. of rated supply voltage *4 [Power consumption] Relay ON: Approx. 1.8 VA (1.6 W) at 120 VAC, 60 Hz Relay OFF: Approx. 1 VA (0.6 W) at 120 VAC, 60 Hz [Control outputs] 3 A at 250 VAC, resistive load (cos phi = 1) The minimum applicable load is 1 mA at 1 VDC (P reference value). Contact materials: Au-clad + Ag-alloy *1. Do not use the output from an inverter as the power supply. Refer toSafety Precautions for All Times for details. *4. Use the Timer within 90% to 110% of the rated supply voltage (95% to110% for 12 VDC) when using it continuously under an ambient operating temperature of 50 deg.(C). *5. Set the reset voltage as follows to ensure proper resetting. 100 to 120 VAC:10 VAC max. 200 to 230 VAC:20 VAC max. 100 to 110 VDC:10 VDC max. *6. Refer to Safety Precautions for All Times when combining the Timerwith an AC 2-wire proximity sensor. *7. A diode to prevent reverse voltages is provided only on models witha DC power supply.