Electrical Testing - Page 645

Manufacturer: Megger Brand: Megger Model: 242002-7

The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. There is 0.35" (9 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization ...

Manufacturer: Schneider Brand: Schneider Model: A9MEM3265

Energ Meter, iEM3265 3PH, 1A or 5A CT, Class 0.5S, BACnet, 4-quad, (1)DI, (1)DO

Manufacturer: JDSU / Viavi Brand: JDSU Model: 2302/13

The JDSU SmartPocket OLP-3x series next-generation small rugged optical power meters are ideal for quickly easily and conveniently measuring optical power level and loss in fiber networks from the field. The instruments rugged ergonomic design and large sharp display show relevant results and settings at the same time. Their intuitive one-button operation and automatic wavelength recognition is why technicians choose SmartPocket OLPs when they test fiber. SmartPocket instruments unprecedented data storage capacity for saving up to 100 results and optional micro USB port for downloading results to a PC fulfills all of your testing and reporting needs OLP-34-35-38 PDF [504KB]

Manufacturer: Megger Brand: Megger Model: DET3TD

The Megger DET3 digital ground resistance meter measures ground resistance, voltage, and current for digital ground and bond testing to increase the safety and performance of electrical systems. The unit measures digitally, is autoranging, and has user-selectable 25 or 50V test voltages. The noise rejection feature filters out noise up to 40V peak to peak for more accurate testing in high-noise environments. The meter measures voltage from 0 to 100V, ground current from 0.5mA to 19.9A, and ground resistance from 0.01 to 2000 ohms. The LCD display indicates test results and the status of the batteries for ease of use. The tester is safety rated to European Standards (IEC/EN) 61010-1, Category IV 100V. It is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The DET3 is commonly used by electricians and electrical contractors to help ensure the safety of electrical systems. Specifications Power supply (8) AA batteries Voltage range 0 to 100V Ground current range 0.5mA to 19.9A Ground resistance range 0.01 to 2000 ohms Weight (including batteries) 1kg/2.2 lb. Safety standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 100V Ingress protection (IP) standard met IP54, for protection against dust and splashing water Dimensions 203 x 148 x 78mm/8 x 5.7 x 3.2 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties...

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent LiChrospher 60 RP-select B 5um 125x4mm - BC

Manufacturer: B&K Precision Brand: B&K Precision Model: 4055 Color: Grey/White

The 4055 Dual Channel Function/Arbitrary Waveform Generator is capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. With an easy-to-read color display and an intuitive user interface with numeric keypad, this instrument offers plenty of features including linear/logarithmic sweep, built-in counter, extensive modulation and triggering capabilities, a continuously variable DC offset, and a high performance 14-bit, 125 MSa/s arbitrary waveform generator. The main output voltage can be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit) and the secondary output can be varied from 0 to 3 Vpp into 50 ohms (up to 6 Vpp into open circuit).

Manufacturer: B\u0026K Precision Brand: B\u0026K Precision

Function Generators & Synthesizers 25MHzDualCH Function Arbitrary Generator

Manufacturer: Megger Brand: Megger Model: GA-90001

The Megger GA-90001 two-piece Kelvin clamp cable kit is used to conduct resistance tests with a Megger MOM2 digital microhmmeter (sold separately). The kit consists of one 1.3m (4 ft.) red cable and one 3m (10 ft.) black cable, both with Kelvin clamps. The GA-90001 is used to conduct resistance tests of electrical equipment with a MOM2 digital microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Greenlee Brand: Greenlee Model: 567XL

Greenlee 567XL OPM, SI (SOC) 567XL

Manufacturer: Siglent Brand: Siglent

*SIGLENT's SDG2000X is a series of dual-channel function/arbitrary waveform generators with specifications of up to 120MHz maximum bandwidth, 1.2GSa/s sampling rate and 16-bit vertical resolution. The proprietary TrueArb & EasyPulse techniques help to solve the weaknesses inherent in traditional DDS generators when generating arbitrary, square and pulse waveforms. With advantages above, SDG2000X can provide users with a variety of high fidelity and low jitter signals, which can meet the growing requirements of complex and extensive applications. Key Features *Dual-channel, 120MHz maximum bandwidth, 20Vpp maximum *output amplitude, high fidelity output with 80dB dynamic range *High-performance sampling system with 1.2GSa/s sampling rate and 16-bit vertical resolution. No detail in your waveforms will be lost *Innovative TrueArb technology, based on a point-by-point architecture, supports any 8pts~8Mpts Arb waveform with a sampling rate in range of 1μSa/s~75MSa/s *Innovative EasyPulse technology, capable of generating lower jitter Square or Pulse waveforms, brings a wide range and extremely high precision in pulse width and rise/fall times adjustment *Plenty of analog and digital modulation types: AM、DSB-AM、 FM、PM、FSK、ASK and PWM *Sweep and Burst function *High precision Frequency Counter *Standard interfaces: USB Host, USB Device（USBTMC）, LAN （VXI-11） *Optional interface: GPIB *4.3" touch screen display for easier operation *Bandwidth :120MHz *Sampling rate: 1.2 GSa/s (4X Interpolation) *Vertical resolution: 16 bit *Num. of channels: 2 *Max. amplitude: ±10V Display :4.3" touch screen display, 480 x 272 x RGB *Interface Standard: USB Host, USB Device, LANOptional: GPIB (USB-GPIB adaptor)