Electrical Testing - Page 688

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks BINDING POST BLUE

Manufacturer: Grayhill Brand: Grayhill

Test Plugs & Test Jacks Hardware Standard Green Cap

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks BANANA PLUG BLACK

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks BANANA PLUG RED

Manufacturer: MAIZI Brand: OWON

Main Features: 1. 60MHz～300MHz with dual channels; 2. 500MS/s～3.2GS/s sample rate; 3. 10M record length for each channel; 4. Large 8-inch 800x600 pixels display; 5. Autoscale function ; 6. Pass/Fail function; 7. Smart design with easy workplace; 8. Battery (Optional); 9. Multiple interface：USB；VGA；LAN Dimension: 340mm(L)×155mm(H)×70mm(W) Weight: 1.8kg (without battery) Application Electronic circuit debugging Circuit testing Design and manufacture Education and training Automobile maintenance and testing Performance characteristics Model SDS7102 Bandwidth 100MHz Sample rate(Real time) 1GS/s Horizontal Scale(S/div) 2ns/div～100s/div, step by 1～2～5 Rise time (at input, typical) ≤3.5ns Channels 2 + 1 (External) Display 8" color LCD, TFT display , 800×600 pixels, 65535 colors Input impedance 1MΩ±2%，in parallel with 10pF±5pF channels Isolation 50Hz: 100 : 1, 10MHz: 40 : 1 Max. input voltage 400V (PK-PK) （DC + AC PK-PK） DC gain accuracy ±3% DC accuracy(Average) Average≥16:±(3% reading+0.05div) for △V Probe attenuation factor 1X，10X，100X，1000X LF respond(AC, -3dB) ≥5Hz(at input, AC coupling, -3dB) Sampling rate/relay time accuracy ±100ppm Interpolation (sin x)/x Bandwidth 100MHz Input coupling DC, AC , GND Vertical resolution (A/D) 8 bits resolution (2 Channels simultaneously) Vertical sensitivity 2mV/div～10V/div(at input) Trigger type Edge, Pulse, Video, Slope, Alternate Trigger mode Auto, Normal, Single Trigger level ±6 divisions from screen center Acquisition modes Sample, Peak Detect and Average Line/field frequency(Video) Support standard NTSC、PAL and SECAM broadcast systems

Manufacturer: AEMC Brand: AEMC Model: 10000-36-2-0.1

The AmpFlex is a flexible AC current probe composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes cannot be used. In particular, it can be installed in tight spaces, around cable bundles, around wide or large bus bars, or even wrapped around irregular shapes. The Shape Memory feature enables the user to pre-shape the sensor before inserting it between or around conductors. This feature facilitates positioning the sensor around the conductor, enhances user safety, and alleviates the drooping effect associated with other flexible sensors. The AmpFlex is lightweight and does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by current overloads. The sensor assembly is waterproof and insulated for 1000V working voltage. The AmpFlex meets EN 61010 and is CE marked. The AmpFtex has a mV output proportional to the current measured for direct readings on DMMs, loggers. oscilloscopes and power or harmonic meters. The length of the flexible sensor can be selected from 24" (450mm) to 60" (1520mm). Longer lengths are available.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-162X

Fluke EI-162X Clip-on Current Transformer (Sensing) with Shielded Cable Set The EI-162X Clip-On Current Transformer (Sensing) is used along with the Fluke 1623 or 1625 to perform Selective and Stakeless testing. Selective testing means using one clamp along with earth ground stakes to provide earth ground loop resistance values for one earth ground electrode. Stakeless testing uses two clamps to perform earth ground loop resistance measurement without stakes. Both tests have the advantage of providing measurements with no disconnection from the grounding system! Safer and quicker. Includes a shielded cable.

Manufacturer: AEMC Brand: AEMC Model: 2126.83

The High Frequency MiniFlex Probe is a compact flexible AC current measurement device composed of a flexible sensor and an electronic module. It is designed to measure AC Current from 5Hz to 1MHz. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used.

Manufacturer: BK Precision Brand: B&K Precision Model: 4052

The BK Precision 4052 5 MHz Dual Channel Function/Arbitrary Waveform Generator is capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. With easy-to-read color displays and an intuitive user interface with numeric keypad, the BK Precision 4052 Generator offers plenty of features including linear/logarithmic sweep, built-in counter, extensive modulation and triggering capabilities, a continuously variable DC offset, and a high performance 14-bit, 125 MSa/s arbitrary waveform generator. The main output voltage can be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit) and the secondary output can be varied from 0 to 3 Vpp into 50 ohms (up to 6 Vpp into open circuit).

Manufacturer: Precision Rated Optics Brand: Precision Rated Optics Model: PM-204B

PM-204B The Precision Rated Optics Power Meter PM-204B (CATV) w/ data storage The Precision Rated Optics 200 Series Power Meters are the advanced version of the PRO 100 Series Power Meters. It is more functional and intelligent. Designed for use in laboratories LANs WANs and CATV as well as longdistance optical network the Optical Power Meters together with PROs Stabilized Laser Sources can be used to identify optical fiber measure optical attenuation verify continuity and evaluate fiber link transmission quality. Download Specifications for PRO 200 Series Power Meters PDF [374 KB]