Electrical Testing - Page 772

Manufacturer: Fluke Networks Brand: Fluke Networks Model: NFM110

Accessory Tip Set for the Fluke Networks FT500 FiberInspector Mini (LC, FC and 1.25 mm Universal) Video Microscope

Manufacturer: JinHan Brand: Jinhan

The JinHan JDS3022E is a handheld electrical test device that combines a 30 MHz, double-channel, handheld digital oscilloscope for viewing electrical signals,The oscilloscope has maximum real-time sample rate of 250MS/s. Its 18 automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. Up to six waveforms can be stored in the internal memory. The delta relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. Additional specifications include various triggering features. The unit has a 4.3" color TFT (thin film transistor) LCD with a resolution of 400 x 272 pixels for viewing waveforms and measurements. An oscilloscope is used for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. A multimeter is an electrical testing tool for measuring multiple properties of an electrical circuit to verify proper operation or diagnose problems. The unit has a USB port for connecting to a PC, It is rated for CAT II installations to 400V, which covers energy-consuming equipment connected to a fixed installation, including household, office, and laboratory. It has European Conformity (CE) marking.

Manufacturer: 100 kHz Handheld LCR Meter Brand: B&K Precision Model: 880 Color: Blue

The 878B, 879B, and 880 40,000-count handheld LCR meters measure inductance, capacitance, and resistance quickly and precisely. The 879B and 880 also measures impedance, Theta, DCR, and ESR. Additionally, the 880 offers capabilities typically only found in bench LCR meters such as a 4-terminal configuration, basic measurement accuracy up to 0.1%, test frequencies up to 100 kHz, selectable test signal levels and measurement rate.

Manufacturer: Teledyne LeCroy Brand: Teledyne LeCroy

Test Probes 10, 500 MHz, 10 M Passive Probe

Manufacturer: Owon Brand: OWON

The Owon SDS6062E is a 2+1 Channel Digital Storage Oscilloscope with 60 MHz bandwidth, 500 MS/s sample rate, and 8 inch (800x600) color TFT-LCD screen all in an ultra-thin body. Includes AutoScale function to simplify the operation. The Owon SDS6062E includes 2 probes, USB cable, software CD, probe adjust pen, power adapter and user manual.

Manufacturer: RF Explorer Brand: 3G Combo Model: 3G Combo

RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. It is based on a highly integrated frequency synthesizer and double balanced mixer which offers high performance, compact size, low consumption and low cost. It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector. This model includes a WSUB1G baseline unit plus an RFEMWSUB3G Expansion Module conveniently assembled and tested. It comes with two SMA connectors and two antennas,a nice Nagoya NA-773 wideband telescopic antenna for all Sub-GHz frequencies and a whip helical for 2.4GHz band. Additional, specific band antennas may be needed to cover efficiently some of the frequencies supported.

Manufacturer: ATTEN Brand: Atten Model: ADS1102CAL

The ATTEN ADS1102CAL is the most powerful portable digital oscilloscope at present. It is the perfect combo with top performance and powerful function, which represents the highest level in digital storage oscilloscopes. Application * Electronic circuit design and debugging * Examine the instantaneous signal * Circuit function test * Industrial Control Survey Specifications * Model Index: ADS1102CAL * Bandwidth: 100MHZ * Sampling Rate: * Single Channel: 1Ga/s; * Double Channels: 500Msa/s * Equivalent Sampling Rate: 50GSa/s * Memory Depth: * Single Channel: 40K; * Double Channels: 1M/CH * Rise Time:

Manufacturer: T3 Innovation Brand: T3 Innovation Model: CC220

Dark unpowered coax systems give no clue as to their design, condition or configuration. The new Coax Clarifier by T3 Innovation makes it simple and easy to discern the layout of a coax network, locate faultson individual cable runs, identify remotes through splitters, and determine cable run lengths. In addition, separate wiremapping sets allows a technician to map out the entire coax system and measure the quality and characterization of the overall network for carrying services, such as high grade video, surveillance data and HD programming.

Manufacturer: OUTEST Brand: OUTEST

Manufacturer: Pico Brand: Pico

Pico 2205 MSO BASIC PicoScope Mix-Signal Oscilloscope (PS-2205 MSO) W/O Probes Full-Featured oscilloscope The picoScope 2205 mSo from pico technology is a 2+16 channel, 8-bit resolution oscilloscope. this means that along with 2 analog channels, the picoScope 2205 mSo also has 16 digital inputs, so you can view your digital and analog signals simultaneously. The picoScope 2205 mSo is a full-featured oscilloscope. A function generator and arbitrary waveform generator are built in and include a sweep function. it also offers mask limit testing, math and reference channels, advanced digital triggering, serial decoding, automatic measurements and color persistence display. Triggering The picoScope 2205 mSo offers a comprehensive set of advanced digital triggers including: pulse width, windowed and dropout triggers to help you capture the data you need. Digital triggering reduces timing errors and allows our oscilloscopes to trigger on the smallest signals, even at the full bandwidth. trigger levels and hysteresis can be set with high resolution. Digital triggering reduces rearm delay and, combined with the segmented memory, allows the triggering and capture of events that happen in rapid sequence. the mask limit testing function can then scan through these waveforms to highlight failed waveforms for viewing in the waveform buffer. The 16 digital inputs can be displayed individually or in arbitrary groups labelled with binary, decimal or hexadecimal values. A separate logic threshold from -5 V to +5 V can be defined for each 8-bit input port. the digital trigger can be activated by any bit pattern combined with an optional transition on any single input. Advanced logic triggers can be set on either the analog or digital input channels, or both. Selecting digital channels, or groups Selecting the digital channels in the software couldn't be easier