Electrical Testing - Page 812

Manufacturer: Made in usa Brand: awasy2415

NEW OLD STOCK IN DIRTY BOX(ZJ1-3-1)Exported By ExportYourStore

Manufacturer: Extech Instruments Brand: Extech Instruments Model: EX830

Theses clamp-on multimeters priovide a built-in IR thermometer with laser pointer that makes troubleshooting heat sensitive areas simple. Features include data hold, Min/Max, autoranging with manual range button, auto power off, and an easy-to-read 4000 count backlit dual LCD display. Peak hold captures inrush currents and transients, and models 26834-22, -24 include true RMS and a type K thermometer probe. Units ar CAT III, 600V rated. Model 26834-26 is CAT IV 600V rated. Clamp meter, multimeter and infrared thermometer all in one! Locate hot spots and overheating equipment with built-in IR thermometer Compact and powerful, the Extech EX830 1000-Amp True RMS AC/DC Clamp Meter with Infrared Thermometer provides the versatility of multiple meters in one convenient device. The EX830 measures AC/DC voltage and current, resistance, diode, continuity, frequency, and capacitance. It also includes a built-in infrared thermometer for detecting invisible hotspots, a DC Zero function, a Type K bead wire temperature probe, and True RMS to ensure accurate measurements without distortion from electronic devices. A large, backlit display allows for easy reading, while the ergonomically designed housing offers comfortable, one-handed operation.1000A True RMS AC/DC Clamp Meter with IR ThermometerAt a Glance:Accurately reads electrical measurements, including DC currentBuilt-in, non-contact infrared thermometer detects invisible hot spotsType K bead wire probe for measuring temperatureLarge LCD screen with backlit display for clear viewingDurable, ergonomic design for easy one-handed operationThree-year limited warranty on parts and laborEX830 clamp-on multimeter with built-in InfraRed Thermometer is ideal for industrial applications. View larger.Multipurpose Meter in One Convenient DeviceThe Extech EX830 offers multiple functions so service technicians can carry only one meter into the field instead of several. The EX830 will measure both AC and DC current, AC/DC voltage, frequency, resistance, capacitance, diode, and continuity...

Manufacturer: Megger Brand: Megger Model: 249000

The Megger 249000 series calibration shunt calibrates a Megger 247000 series or DLRO10 series digital low resistance microhmmeter (sold separately). The shunt verifies the accuracy of the microhmmeter because the resistance of the shunt at a given current is known. The 249000 series is used to conduct more accurate resistance tests with a DLRO10 series microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Megger Brand: Megger Model: 249000

The Megger 249000 series calibration shunt calibrates a Megger 247000 series or DLRO10 series digital low resistance microhmmeter (sold separately). The shunt verifies the accuracy of the microhmmeter because the resistance of the shunt at a given current is known. The 249000 series is used to conduct more accurate resistance tests with a DLRO10 series microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 8141

Kyoritsu 8141 leakage current clamp sensor. In order to monitor energy saving and to control the electric facilities, it is essential and imperative to control the leak and load currents from mains and branch power lines up to the equipment. Clamp sensor is easy to carry and simple to install. Rated current 1000mA AC. 24mm conductor size. Accuracy: +/- 1.0 percent rdg +/- 0.1mV (50/60Hz), +/- 2.0 percent rdg +/- 0.1mV (40Hz to 1kHz). Output voltage: AC 100mV/1000mA (AC 100mV/A). Output connector: Mini-DIN 6-pin. 0 to 50 degree c temperature range. Withstand voltage: 3540V AC for 5 seconds. Approximate 2m cable length. Approximate 180 ohm output impedance. Accessories includes: portable case, instruction manual. Measures 100 mm length by 60 mm width by 26mm depth.

Manufacturer: Patlite Brand: Applied Materials (Amat)

Assembly, Gen Rack Rf On Rotating Lamp; Clean Room Item

Manufacturer: Psiber Data Systems Brand: Psiber Data Model: MM-A22DN

Psiber Multimode SFP Interface is a module for use only with the LanExpert LE85M and LE85S. Psiber accessories and parts.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-CV200

' Infrared Window, Crystal Insert Size 50mm dia., Viewing Aperture Size 45mm dia., Window Thickness 2mm, NEMA Rating 4, 12, IP Rating 67, Gasket Maximum Temperature 232 Degrees C (450 Degrees F), Body Maximum Temperature 232 Degrees C (450 Degrees F), Optic Maximum Temperature 232 Degrees C (450 Degrees F), Voltage Range Any, Components CV200, ClirVu(R) Infrared Window, Body Material Zinc/Aluminum Alloy, Includes Hand Turn Door, Manufacturers Warranty Length Limited Lifetime '

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3290RA-PRO

One of cal test highest frequency passive probe at 500 MHz. This compact probe is an excellent replacement for probes used with high frequency scopes. Complete accessories supplied with this model. IEC rating: 300 V CAT II. RoHS (2002/95/EC) compliant. Attenuation: 10x. Input impedance: 10 mega ohms. Input capacitance: =8 pF. Output impedance : 1 M ohms. Risetime: 0.7 ns. Compensation: 8-18 pF. Cable length: 1.3 m. Readout actuator. Operating temperature: 0 degree to +50 degree C. Humidity: 85 percent RH or less (at 35 degree C).

Manufacturer: Fluke Brand: Fluke

Set of NiMH batteries designed for use with Fluke ScopeMeter 190 and 190C Series, as well as in the Fluke 430 Series. The battery pack has to be charged in the instrument. Features: Nominal Voltage: 7.2V Capacity: 3,500 mAh