Electrical Testing - Page 816

Manufacturer: Megger Brand: Megger Model: 1001-012

The Megger ICLAMP current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability Ni-Fe alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to ICLAMP. The output terminals of ICLAMP are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions. ICLAMP is rated to CATIV 600 V, according the international standard IEC 61010. Clamp Usage The ICLAMP is intended to clamp around a single phase of the asset to be tested and not phase + neutral because this would yield an incorrect result as a consequence of current flowing in opposite directions. Try to keep clamps separate wherever possible to improve quality of multiphase current measurements. An ammeter measuring up to 1 A can be connected directly to the ICLAMP. A current of 1000 A will result in the ammeter reading 1 A (1000:1 step down ratio). The ICLAMP generates 1 mV output signal across 1 Ω burden resistance for every 1 A of primary current, so if using a multimeter, one with a mV AC range is required. Dedicated earth tester instruments like Megger's DET3TC, DET4TC and DET4TCR will need to ensure the input resistance and measurement circuitry are appropriate for the 1 mV - 1 V input range and a primary current limit of 20 A. If using a TRMS multimeter the voltage reading will be TRMS because of the accuracy and crest factor performance of the ICLAMP

Manufacturer: Hioki Brand: Hioki

Hioki CM4372 600A AC/DC Clamp Meter with Built-In Bluetooth Wireless Technology The CM4370 Series surpassed the requirements of numerous durability tests to deliver safety, confidence and peace of mind. × Increased Jaw Strength A revised design features stronger jaws to ensure the instrument will provide even more years of reliable use Wide Operating Temperature Range Thanks to an operating temperature range that has been expanded from the previous design, the CM4370 Series can be used in freezing temperatures or on the hottest summer days. Dustproof and Waterproof Design Measurement functionality is maintained despite exposure to sand or dust as well as water droplets.   Rugged clamp meters for the toughest situations   Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CM4372 is a 600A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V is ideal for the clamp maintenance inspections of electrical and solar power equipment. Measured values can be sent to a smartphone or tablet using Bluetooth® wireless technology and displayed as waveforms in real time. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION. AndroidTM and Google PlayTM are registered trademarks of Google, Inc. iOS is a registered trademark of Cisco in the U.S. and other countries. iPhone® , iPad® , iPad miniTM, iPad ProTM, and iPod Touch® are registered trademarks of Apple Inc

Manufacturer: B&K PRECISION Brand: B&K Precision

B&K PRECISION 4003A FUNCTION GENERATOR FREQUENCY/PULSE, 4MHZ

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADED RADIUS

Manufacturer: Hioki Brand: Hioki

Hioki AC/DC CLAMP METER CM4370 series Hioki CM4374 AC/DC Clamp Meter 2000A w/ Bluetooth ×   Hioki CM4374 AC/DC Clamp Meter 2000A w/ Bluetooth   True RMS 2000 A AC/DC Clamp Meter with Bluetooth Wireless Technology for Advanced Applications and the Toughest Situations   Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CM4374 is a 2000A True RMS clamp meter that features stronger jaws, broader -25? to 65? operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V is ideal for the clamp maintenance inspections of electrical and solar power equipment. Measured values can be sent to a smartphone or tablet using Bluetooth® wireless technology and displayed as waveforms in real time.   This instrument is a clamp meter that can perform true RMS measurement of current simply by clamping it around a circuit. In addition to current, it provides voltage measurement, frequency measurement, rush current measurement, resistance measurement, diode measurement, capacitance measurement, temperature measurement, voltage detection, and DC power measurement. The CM4372 and CM4374 also provide Bluetooth communications functionality, allowing measurement data to be monitored and logged from a smartphone or tablet.   Rugged clamp meters for the toughest situations     The CM4370 Series surpassed the requirements of numerous durability tests to deliver safety, confidence and peace of mind

Manufacturer: Hioki Brand: Hioki

Hioki AC/DC CLAMP METER CM4370 series Hioki CM4374 AC/DC Clamp Meter 2000A w/ Bluetooth ×   Hioki CM4374 AC/DC Clamp Meter 2000A w/ Bluetooth   True RMS 2000 A AC/DC Clamp Meter with Bluetooth Wireless Technology for Advanced Applications and the Toughest Situations   Hioki clamp on meters are best-in-class measuring devices incorporating Hioki's expertise in current sensing technology. The CM4374 is a 2000A True RMS clamp meter that features stronger jaws, broader -25? to 65? operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V is ideal for the clamp maintenance inspections of electrical and solar power equipment. Measured values can be sent to a smartphone or tablet using Bluetooth® wireless technology and displayed as waveforms in real time.   This instrument is a clamp meter that can perform true RMS measurement of current simply by clamping it around a circuit. In addition to current, it provides voltage measurement, frequency measurement, rush current measurement, resistance measurement, diode measurement, capacitance measurement, temperature measurement, voltage detection, and DC power measurement. The CM4372 and CM4374 also provide Bluetooth communications functionality, allowing measurement data to be monitored and logged from a smartphone or tablet.   Rugged clamp meters for the toughest situations     The CM4370 Series surpassed the requirements of numerous durability tests to deliver safety, confidence and peace of mind

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Plugs & Test Jacks RED MINI BANANA PLUG

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 3132A

The Kyoritsu analog megohmmeter is an insulation tester with three test voltages—250, 500, and 1,000V—for measuring insulation resistance to 400MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance continuity and lights an indicator and sounds a buzzer when a live circuit is detected. When measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter is available in a model (B009TALC6S) that measures low-resistance continuity to 20Ω and has a backlight for visibility in low light, and in a model (B009TALDUI) that measures low-resistance continuity to 500Ω and detects AC voltage to 600V. The unit has a battery voltage check that indicates the condition of the batteries. It is rated for category (CAT) III installations to 300V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It comes with a set of test leads, a test lead storage pouch, two 500mA/600V fuses, a shoulder strap, six 1.5V AA batteries, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsMaximum insulation resistance measured400MΩTest voltages250V, 500V, 1,000VMaximum AC voltage measured600V (model B009TALDUI only)Installation ratingCAT III, 300VStandards metIEC safety standards 61010-1, 61010-2-031, and 61557-1/2/4; IP51; CE markingPower(6) 1.5V AA batteriesMegohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circuit and check the continuity of an electrical circuit to detect electrical problems such as degrade...

Manufacturer: Yokogawa Brand: Yokogawa

Manufacturer: Fluke Corporation Brand: Fluke Model: BE9005 120

7.5V DC battery eliminator for operation of calibrator from 120 volt ac line. UL/CSA recognized. Application: for use in North America; 120V AC 60 Hz lines. Measures 3-51/64" width by 2-1/2" height by 2-25/128" depth. One year warranty.