Pressure & Vacuum - Page 188

Manufacturer: United Electric Brand: UNITED ELECTRIC

This is the United Electric Spectra 10-C11 Miniature Pressure Switch configured with the M511 option which designates that the pressure connection is 1/4" NPT Male 316 Stainless Steel. (Image does not feature M511 configuration)

Manufacturer: Winters Brand: Winters

PPC Standard Process Gauges are used where operator safety is a must. Applications are suited for process, chemical and petroleum industries especially with highly corrosive media. PPC Add-On Options Features: Solid phenolic front and polypropylene pressure relief back safety case Field liquid-fillable (bottom|Connection only) ±0.5% accuracy Stainless steel full rotary movement for longer life Micrometer pointer for ease in calibration Under and overload stops 316L stainless steel, brass or Monel wetted parts Restricted orifice standard on dual scale (optional on single scale) ASME B40.100 compliant RoHS compliant (SS and Monel internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Sun Hydraulics Brand: Sun Hydraulics

This valve is a 3-way, normally open modulating element that incorporates an integral pilot control cavity. The pilot control cavity will accept any T-8A pressure control cartridge. The valve reduces a high primary pressure at the inlet (port 2) to a constant reduced pressure at port 1, with a full flow relief function from port 1 to tank (port 3). The pilot cartridge's setting determines the difference in pressure between reduced pressure (port 1) and the tank (port 3). Minimum Control Pressure: 100 PSI

Manufacturer: Winters Brand: Winters Model: PFP1038R1

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Honeywell, Inc. Brand: Honeywell

C6097A1038, Honeywell, Inc., Pressure Switch, 12 to 60 in. w.c.

Manufacturer: Dwyer Brand: Dwyer

Dwyer Photohelic Pressure Switch / Gauge

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-500-30/300-psi

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...

Manufacturer: Fluke Brand: Fluke Model: Fluke 1AC-A1-II Color: Yellow/Gray

Fluke 1AC-A1-II-5Pack Specifications: Operating principle: Senses the steady state electrostatic eld produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Voltage sensing ranges: Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model Detector tip style: Blade or round, depending on model Light source: One high intensity red LED Agency Approvals: c CSA us, CE, TUV, C-Tick Safety Rating: 1000 V, CAT IV IP Rating: IP 40 Operating Temperature: -10°C to 50°C Operating humidity ranges: 0% to 95% (0°C to 30°C); 0% to 75% (30°C to 40°C); 0% to 45% (40°C to 55°C) Operating Altitude: 3000 meters Batteries Required: (2) 'AAA' AlkalineFluke 1AC-A1-II-5Pack Includes: (5) Voltage Testers (2) 'AAA' BatteriesFluke 1AC-A1-II-5Pack Features: Voltbeat technology and continuous self-test - so you always know it's working Upon detection, tip glows and beeper sounds CAT IV 1000 V for added protection Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model 20 V to 90 V AC control circuit model also available The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 52216675

The Wika low pressure differential pressure gauge is designed to measure dry, clean non-aggressive gases and air. This instrument is ideally suited to measure differential pressure in filtration systems, pressure monitoring for HVAC, air handlers and ventilation systems and for pressure monitoring of clean rooms, gas scrubbers and dust collection systems. 4-1/2-inches diameter. Case: high-impact polycarbonate. Wetted parts: silicone rubber, polycarbonate. Window: polycarbonate. Dial: white aluminum. Pointer: black aluminum. Accuracy: + 3 percent of span. Mounting: 3 self-tapping mounting screws (standard). Applications: for dry, clean, non-aggressive gases, usually air, fan and blower monitoring, differential pressure monitoring in filters and overpressure monitoring in cleanrooms.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9832764

The WIKA industrial pressure gauge has stainless steel wetted parts, which resist corrosion against chloride samples, and has a circular dial that is enclosed in a stainless steel case that resists corrosion. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to a variety of percentages across the entire range of the gauge, depending on other standard features, such as dial size. Accuracy ranges are: + or - 2.5 percent of span; + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade 1A accuracy class; or + or - 2/1/2 percent of span over the entire range of the gauge, or ASME Grade A accuracy class. The male connection is available as a lower mount, a lower back mount, or a center mount, and comes with a choice of a 1/8", 1/4", or a 1/2" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use in corrosive environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying...