Pressure & Vacuum - Page 200

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: KS7S2042F2200#

Ashcroft combines the proven polysilicon thin film technology with its longtime know-how of diaphragm seals to create the KS sanitary pressure transmitter. The all-welded Stainless Steel construction meets the 3A Sanitary Standard 74-02. The KS Sanitary Pressure Transmitter features the benefits of polysilicon thin film performance at an affordable price. Modern chemical vapor disposition methods provide simple, stable, molecular bonds between a proven metal diaphragm and polysilicon strain gage bridge. There are no epoxies or bonding agents to contribute to signal instability or drift. The integral metal diaphragm and polysilicon bridge are virtually unaffected by shock, vibration or mounting position.

Manufacturer: Lumenite Brand: Lumenite Model: LSTT-4220-C2"-200DEGF

Sanitary temperature transmitter with 4-20mA output standard; optional 1-5VDC, 1-6VDC reverse polarity protected. Meets all 3A, FDA, USDA requirements.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 4310

The Dwyer Capsuhelic series 4000 differential pressure gauge with an aluminum case has a circular 4" (100 mm) dial, and four female 1/4" NPT rate connections, and measures pressure with single scale in inch water column (WC), mm WC, cm WC, psid, or kPa with a display accuracy of + or - 3 or 4%. The die-cast aluminum case with impregnated hard coating is for measuring air and compatible gases and oil-based liquids. The circular dial is 4" in diameter and measures pressure with a single scale in inch water column (WC), mm WC, cm WC, psid, or kPa. The pressure being measured is held within a capsule in the gauge, which permits the use of the gauge on system pressures of up to 500 psig, even with differentials less than 0.1 in WC. The gauge accuracy is + or - 3% of full scale at 70 degrees F (21.1 degrees C) with + or - 4% of full scale on some models. The pressure limits are -20" Hg. to 500 psig. The temperature limit is 20 to 200 degrees F (-6.67 to 93.3 degrees C). Four female connections with 1/4" NPT (National Pipe Thread) rate provide for vertical mounting of the gauge. The connections are paired with one high and low pressure pair of taps on top for air and gas and one high and low pressure pair on bottom for liquids. This gauge is suitable as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks, and other applications involving pressure, vacuum, or differential pressure. The gauge comes with two 1/4" NPT plugs for duplicate pressure taps, four flush mounting adapters with screws, and four surface mounting screws.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another referenc...

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF800-675-500-ST

ACCUVAC TECHNOLOGY Zero Length Reducer.The manufacturer is ISO registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2230

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: Winters Brand: Winters

PFP Premium Industrial Gauges are excellent for severe ambient and process conditions where harmful vibration and pulsation are present. Their applications include hydraulic equipment, pressure washers, oil field equipment, pumps, compressors and process systems. PFP Add-On Options Features: Liquid filled stainless steel case protects against vibration and pulsation Bayonet ring Highly accurate Back, bottom, or panel mounted Under and overload stops Ventable plug on 2.5€ to 4.5€ stainless steel and 4.5" brass bottom mount and 4" stainless steel back mount gauges Stainless steel or brass wetted parts Restrictor screw standard on dual scale (optional on single scale) Dry case available ASME B40.100 compliant (EN837-1 available) RoHS compliant (SS internals only) CRN registered 5 year warranty Made in Canada

Manufacturer: Fisher Rosemount Brand: Fisher Rosemount

2024 D2A22B0S1B4 D2A22BOS1B4 Rosemount Pressure Transmitter

Manufacturer: CME Brand: CME Tools

8" - 4 jaw self-centering lathe chuck with L00 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. PRECISION SEMI-STEEL BODIES. TOP QUALITY. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING. 2-5/8" THRU HOLE DIAMETER Back mounting recess dia. 165mm Back mounting bolts circle dia. 180mm

Manufacturer: GW DAHL Brand: GW DAHL

NEW GW DAHL P200+P28+P11 CONTROLAIR P/I PRESSURE TRANSMITTER 3-15PSI D536371

Manufacturer: ASHCROFT Brand: Ashcroft

NEW ASHCROFT A2SCM0242DN3000#G 3000PSI 12-36V-DC PRESSURE TRANSMITTER D557083