Calibration - Page 26

Manufacturer: Vee Blocks Brand: Vee Blocks

Made of hardened tool steel in matched pairs. Each block includes reversible, swing-away clamp. Side slots allow easy clamping. All sides are ground square and parallel within .0002"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 616151-541

The Mitutoyo grade AS-1 square gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of ceramic, which resists corrosion, abrasion, and burrs, can withstand high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo...

Manufacturer: Generic Brand: Generic

Contents include: -1 Pair 3/16" x 1" with 5/16" Hole -1 Pair 3/16" x 1-1/4" with 3/8" Hole -1 Pair 3/16" x 1-1/2" with 7/16" Hole -1 Pair 3/16" x 1-3/4" with 1/2" Hole

Manufacturer: HENRY TROEMNER Brand: Troemner Henry Model: 8424

Troemner Electronic Balance Calibration Weights are available in Troemner Ultra Class and ASTM Classes 1 and 4. They are precision crafted of stainless steel with a highly polished finish. The 20kg to 5kg weights are flat on top with a recessed grip handle for easy handling and gripping. Weights from 5kg to 1kg are cylindrical in shape with a groove near the top for easy handling and gripping. Weights below 1kg are straight cylinders. All weights are manufactured with adjusting cavities. Weights 5kg and below as well as the weight set come in a polypropylene case.

Manufacturer: Starrett Brand: Starrett Model: 234A-4

The rod or "standard" is for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gauges, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. It is made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. Available with insulated handle to minimize expansion by heat when held in the hand.

Manufacturer: TROEMNER INC Brand: Troemner Model: 102882

Economical weights are economical, quality weights. Individual weights are available from 1 mg through 2000 G. Weights are adjusted to tolerances specified by ANSI/ASTM E617 Class 7. Economical Class 7 weights are manufactured from stainless steel and are cylindrical in shape for easy gripping. Weights 1 G to 100 G are of one-piece construction and are adjusted during manufacture by removing material from the bottom of the weight. Weights 200 G through 2 kg have an adjusting cavity on the top that is sealed with a plug. Economical stainless steel weights 1 G and above are perfectly flat on top to stack easily on center. Weights 500 mg and lower are made of stainless steel or aluminum and are flat, one-piece construction with one side turned up to make them easy to handle with Forceps. 500 mg and 200 mg weights are made of stainless steel while weights 100 mg and below are made of aluminum. Suggested markets for economical stainless steel weights include, but are not limited to, educational markets what's included: weights are supplied by the vendor with a traceable calibration certificate or a Statement of accuracy ASTM Class 7 - for rough basic weighing operations two-piece weights with adjusting cavities.

Manufacturer: TTC Brand: TTC

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611195-531

The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made o...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Designed for calibrating micrometers and zeroing vernier, dial, and digital calipers. 1/4" diameter rod with flat end.

Manufacturer: HHIP Brand: HHIP Model: 3402-0001

Guaranteed square parallel within .0002". Hardened & Ground to RC 58-60. 90 degrees Vee blocks. Supplied with bolts and clamps in wooden case.