Calibration - Page 287

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-525

Tolerance between the nominal size and the actual diameter: +/- 0.01mm for 1 - 45mm diameter setting rings; +/- 0.0004" for 0.1" - 1.8" diameter setting rings, Cylindricity: 1.0 micrometer for 1 - 45 mm diameter setting rings; 0.00004" for 0.1" - 1.8" diameter setting rings.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 615191-551

The Mitutoyo grade AS-2 square wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 615191-551

The Mitutoyo grade AS-2 square wear gage block is made of tungsten carbide, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.Wear gage blocks are wrung with frequently used gage blocks to prevent wear. This grade AS-2 gage block is commonly used in workshops for calibrating and inspecting mounting tools and cutters. It is made of tungsten carbide, which is harder than steel and ceramic for greater resistance to wear, and is more resistant to thermal expansion for accuracy. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior.This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to...

Manufacturer: Fluke Corporation Brand: Fluke Model: STL90

Industrial shielded, 1:1, silicone insulated test lead set. Useful bandwidth 1 MHz. Silicone insulated leads won't crack from cold or melt from accidental contact with hot surfaces. Superior strain relief and flexibility provide extra long life. Compatible with Fluke ScopeMeter test tools shielded test lead set contains of: two shielded test leads: cable length: 1.5 m, safety designed shrouded banana input, safety designed insulated BNC connector, maximum signal voltage: 300 V, maximum voltage to ground: 600 V per IEC 1010-2-031 CAT III, maximum current 3 A Two ground leads: cable length: 250 mm, maximum current 3 A, safety designed shrouded banana jacks Two 4 mm tip adapters, 30 V. Two 2 mm tip adapters, 30 V. Three backprobe pins, 30 V, 1 A. Two insulated alligator clips (AC85A). One year warranty. UL Listed.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS420-R

Voltage probe set for Fluke ScopeMeter 190 Series II. Ruggedized high working voltage probe. 100:1 attenuation value. 150 MHz bandwidth. 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV. Red/black color.

Manufacturer: Fluke Calibration Brand: Fluke Model: 3103-3

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Mitutoyo Brand: Mitutoyo

MIC, OUTSIDE, 7-8", 0 .0001", R

Manufacturer: Gasco Brand: Gasco

Calibration Gas, Gas Name Ammonia, Air, Gas Mixture 200 ppm Ammonia, O2, Background Gas Air, Cylinder Cylinder 44L, Cylinder Material Aluminum Alloy, For Use With Any and All OEM Gas Detectors, Connection Size C-10, Max. Pressure 825 psi, Cylinder Dia. 2-9/10 In., Cylinder Height 10-1/2 In., Accuracy +/-5 Percent, Calibration Certificate NIST Technical Specification Item Calibration Gas Gas Name Ammonia, Air Gas Mixture 200 ppm Ammonia, O2 Background Gas Air Cylinder Cylinder 44L Cylinder Material Aluminum Alloy For Use With Any and All OEM Gas Detectors Connection Size C-10 Max. Pressure 825 psi Cylinder Dia. 2-9/10 Cylinder Height 10-1/2 Accuracy +/-5% Calibration Certificate NIST

Manufacturer: Mitutoyo Brand: Mitutoyo

BACK PLUNGER TYPE DG0 .01-5MM

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919872

The Martel LDT-500 pneumatic dirt and liquid trap is used in vertical pneumatic applications to protect sensors, pumps, or calibrators from contamination. A vent in the bottom end allows liquid to drain away without disassembling the trap. The nickel-plated brass trap ends and buna-N O-rings resist corrosion, and the acrylic cylinder is clear for visual indication of dirt or liquid. The trap inlet has 1/8" female universal thread for connection to National Pipe Taper (NPT) or British Standard Pipe (BSP), and the outlet has 1/8" male NPT thread with an O-ring. This dirt and liquid trap has a maximum working pressure of 500 psi and is suitable for protecting devices such as the BetaGauge 330 from contamination in pneumatic bench test applications.Martel Electronics manufactures test and measurement equipment such as calibrators, pressure pumps, and meters. The company, founded in 1987 and headquartered in Derry, NH, meets International Organization for Standardization (ISO) standard 9001.