Calibration - Page 288

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-71X-TRAP

FLUKE FLUKE-71X-TRAP LIQUID & DIRT TRAP, PRESSURE CALIBRATOR

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0007

HHIP pin gage library case features Wooden drawer system for storing pin gages 001 inch set increments.

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Pressure regulator 0-100 psi - AA

Manufacturer: Phase II Plus Brand: Phase II Plus Model: PHT130001-CERT

Phase II PHT1100G-01 Leeb Test Block for "G" impact device

Manufacturer: MITUTOYO Brand: Mitutoyo

Mitutoyo 1.000' Setting Ring 504-177-184

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Calibration Plate ABI 192 - AA

Manufacturer: Fluke Calibration Brand: Fluke Model: 2523-156

Fluke 2523-156 Isolator RS232 Optical 12VDC, 115V Using RS-232 while taking data with your 1523 or 1524 Reference Thermometer may result in a ground loop. Ground loops and electrical interference may result in inaccurate measurements if proper precautions are not taken. One method of breaking a ground loop is to use an optically coupled isolator. The Isolator breaks the electrical ground loop by only communicating data, using light. The optically coupled isolator is connected between the personal computer and the RS-232 cable to the 1523/1524.

Manufacturer: Fluke Corporation Brand: Fluke Model: DP120

Designed to make measurements on signals with floating reference, the DP120 Differential Probe has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 megaohms in parallel with 6 pF. Input impedance between the inputs is 10 megaohms with a capacitance of 5 pF. Shrouded banana probe tip Input. 1.5 meter probe length. Maximum input voltage to ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031. Maximum differential voltage: 1000V DC or1000Vrms or 1200V (DC + AC peak). Safety designed 0.5m BNC output cable. 200x and 20x attenuation. DC to 20 MHz (-3 dB) bandwidth. +/-2.5 percent accuracy. 17.5 ns rise time. CMRR: 200x: at 60 Hz = 80dB, at 1 MHz = 50 dB 20x: at 60 Hz = 70dB, at 1 MHz = 40 dB. Battery type: Alkaline 9 volt, NEDA, IEC6LR61. 8-hour operation, 400-hour stand by battery life. PM 8907/80n (optional) power adapter. AC85A large jaw alligator clips and AC83 pin-grabber test clips included accessories.

Manufacturer: VERMONT GAGE Brand: Vermont Gage

Marked with size and direction of tolerance on gages over .060". Within .0001" round. Material: 52100 tool steel Hardness: Rc 60 - 62 Length: 2" Finish: 10µ" or better Certificate of Accuracy included.

Manufacturer: VERMONT GAGE Brand: Vermont Gage

NIST traceable. Material: 52100 tool steel Length: 2" Finish: 10µ" or better Within .0001" round. Marked with size & direction of tolerance on gages over .060".