|
|
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $131.31
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-275-002-1
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-275-002-1
|
Fowler 52-275-002-1 Inside Micrometer, 1-2" Measuring Range, 0.001" Graduation, +/- 0.0002" Accuracy. Microfine graduations (.001" or .01mm) on a satin chrome finish permit easy reading. With Fowler Inside Micrometer, you are assured of smooth operation and stabilized uniform accuracy. The frame is specially designed to enable the micrometer to provide extremely accurate small internal measurements. Measuring faces are fully hardened, precision ground and microlap finished to assure exceptionally accurate measuring. Ratchet stop thimble assures exact and repetitive readings. Easy zero adjustment on the sleeve. Meets or exceeds Federal accuracy specs. Fowler 52-275-002-1 1-2" inside micrometer comes with a setting ring, a spanner wrench and a case. Fowler 522750021inside micrometer comes with setting ring, a spanner wrench and a case. It also has full 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.
-
4.0 of 5.0 with 26 Reviews
SALE PRICE: $146.40 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 3220-5
Manufacturer: INSIZE
Brand: INSIZE
Model: 3220-5
Inside micrometer, 4-5", graduation 001".
-
4.0 of 5.0 with 26 Reviews
SALE PRICE: $155.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
|
Flexbar Sensing-Saf-Start. The inexpensive Solution to OSHA. Anti-automatic Restart Protection Without the High Cost of Magnetic Motor Starters This is a mandatory OSHA safety requirement. With the Sensing-Saf-Start correctly installed on existing equipment, it will Provide Protection against unexpected start-up, motion, and motor burn-out in the following manner: Voltage drop or power interruption Protection. in the event equipment, while being operated (switch in the "On" Position), should stop due to loss or drop of Electrical power due to Power Failure from any cause, the Sensing-Saf-Start will automatically Disconnect and shut off power to the equipment, so that upon restoration of power, the equipment will not start up even though the power switch to the equipment is in the "On" Position. in order to restore power to the equipment, the equipment switch must be turned "off" first, and then the Reset button on the Sensing-Saf-Start depressed. in the event the equipment is inadvertantly unplugged and then Plugged Back into the power source while the equipment switch is in the "On" Position, the equipment will not restart until the Reset button on the Sensing-Saf-Start is depressed. The Sensing-Saf-Start is intended for installation on equipment which operates on 120-volts or 240-volts A.C. and which is connected to the source of Electric power by means of a 3-Wire Flexible power Cord. The following Standards apply to Machines Driven by 120 volt and 240 volt motors: OSHA (US Occupational Safety and Health Administration 29 DFR #1910.213 (b) (3)*) NFPA (Electrical Standard for industrial Machinery, 1997 Edition, Section 8, Protection) Model No. 17023., 20" Cord on equipment switch End. 8' Cord on power End (No Plug). Wire directly into Disconnect box or instAll TwistLock Plug. Rated 120-volt, A.C., 18-amp 1 H.P. motor maximum, 50/60 cycle.
-
4.0 of 5.0 with 35 Reviews
SALE PRICE: $159.99
Manufacturer: TTC
Brand: TC1
Manufacturer: TTC
Brand: TC1
Features Accuracy: ±.0001" Flatness: ±.00003" Parallelism: ±.00005" Friction thimble for exact readings. Anvil and spindle hardened and ground. Carbide faces. Quick and easy zero adjustment. Positive locking clamp. Complete with standards. Supplied in fitted case with key.
-
4.0 of 5.0 with 19 Reviews
SALE PRICE: $160.00 1% OFF
Manufacturer: HHIP
Brand: TECLOCK
Model: 4409-0068
Manufacturer: HHIP
Brand: TECLOCK
Model: 4409-0068
Made in Japan by TECLOCK. ~ Measuring range is 55-150mm. ~ for closer tolerance measurements of holes, taper and roundness. ~ Easy setting with micrometers or ring gages. ~ Complete with measuring instructions and Certificate of Calibration. ~ Fitted wooden case with anvils index.
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $165.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 133-227
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 133-227
|
The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in inch units for taking precise inside dimension (ID) measurements of the inside dimensions of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.001â€, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.0 of 5.0 with 14 Reviews
SALE PRICE: $165.70 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-2D8
Manufacturer: INSIZE
Brand: INSIZE
Model: 6313-2D8
Setting ring, 2.8 inch dia.
-
4.0 of 5.0 with 4 Reviews
SALE PRICE: $185.00 14% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 133-229
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 133-229
|
The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in inch units for taking precise inside dimension (ID) measurements of the inside dimensions of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.001â€, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.0 of 5.0 with 16 Reviews
SALE PRICE: $193.21 67% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 511-724
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 511-724
|
The Mitutoyo 511-724 Dial Bore Gauge has a measurement range of 50 to 100 mm and is accurate to + or - 0.002 mm. It is precise to 0.001 mm. This direct-measuring gauge uses a two-point contact system that can be used to detect geometry problems such as ovality, and taper and carbide-tipped contact points offer extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.
-
4.0 of 5.0 with 10 Reviews
SALE PRICE: $196.30 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 7351-1EX12
Manufacturer: INSIZE
Brand: INSIZE
Model: 7351-1EX12
Long handle.
|
|