Inside Measurement - Page 76

Manufacturer: Starrett Brand: Starrett Model: 3089Z-131-1424J

The Starrett 3089Z-131-1424J Dial Bore Gauge has a measurement range of 1.4 to 2.4" and uses a two-point contact system to detect geometry problems such as ovality and taper. It has an ergonomic design with non-slip insulating grip and carbide-tipped contact points for extended wear and improved abrasion resistance. The dial indicator provides inch/metric reading capability. All anvils are laser marked for easy selection and a gauge chart is also included. The gauge measures to approximately 6" and comes in a sturdy aluminum case with cutouts for the gauge and all accessories. Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA. What's in the Box?Cover capFront protective coverBack protective cover(2) screws for protective coverLock screwIndicatorRod holder(6) anvils(4) washersWrench(2) brass insertsAluminum case

Manufacturer: INSIZE Brand: INSIZE Model: 3229-19

Tubular inside micrometer, 18-19", graduation 001".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-204

The Mitutoyo 511-204 Dial Bore Gauge for Small Holes has a measurement range of 10 to 18.5 mm and is accurate to + or - 0.005 mm. It is precise to 0.01 mm and the outside diameter of the stem is 8 mm. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper. Carbide-tipped contact points offer extended wear and improved abrasion resistance. A rugged cover protects the dial indicator.Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-001

The Mitutoyo 139 series tubular vernier inside micrometer includes a set of extension pipes with anvils for a diversified range of measurement when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a vernier scale in inch units for taking precise inside dimension (ID) measurements to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 25mm per revolution that helps provide quick positioning. The hollow, tubular extension pipes help provide light weight with rigidity. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-201

The Mitutoyo 511-201 Dial Bore Gauge for Small Holes has a measurement range of 10 to 18.5 mm. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points offer extended wear and improved abrasion resistance. The outside diameter of the stem is 8 mm. This gauge is for use with Mitutoyo dial indicators (sold separately).Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 511-325

The Mitutoyo 511-325 Dial Bore Gauge has a measurement range of 4 to 6.4", is accurate to + or - 0.0002", has gradient spacing of 0.0005", and the micrometer head offers accurate dimensional setting. This direct-measuring gauge uses a two-point contact system to detect geometry problems such as ovality and taper, and carbide-tipped contact points offer extended wear and improved abrasion resistance. The outside diameter of the stem is 0.375".Bore gauges measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gauges are typically calibrated with a setting ring and come in two types: simple and direct-measuring. Simple bore gauges are used with a caliper to transfer the hole measurement, while the more complex gauges take the measurement directly, and display it through a vernier, dial, or digital display. Bore gauges have a two- or three-point contact, indicating how many points on the gauge head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point contacts are used to measure lobing or triangular form error. Pistol-grip bore gauges are used for fast, single-handed operation with repeatable results from one operator to another. Bore gauges can also be used in special applications, such as measuring threads, spline pitch diameters, and deep bores.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 3221-3224

Manufacturer: Fowler Brand: Fowler

1.375" Holemike XT Setting Ring

Manufacturer: Starrett Brand: Starrett Model: 3089Z-131-26J

The Starrett 3089 Series Dial Bore Gage offers precision, a full compliment of features and excellent value.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 511-716

Mitutoyo Dial Bore Gage 511-716, 250-400mm with2046SB dial indicator,0.01mm grad., stem 8mm diam.