Inside Measurement - Page 85

Manufacturer: L.S. Starrett Brand: Starrett

Technical Specification Item Dial Bore Gage Measuring Range (In.) 1.4 to 2.4 Probe Depth (In.) 6.00 Graduations 0.0005 Number of Leaves 11 Length (In.) 4 Dial Reading 0-50-0 Measuring Range (In./mm) 1.4 to 2.4 Includes Case This listing is for each.

Manufacturer: Mitutoyo Brand: Mitutoyo

' Dial Bore Gage, Measuring Range (In.) 2 to 6, Probe Depth (In.) 6, 0.0001 In Graduations, Dial Reading 0-5-0, Standard Head Type, Carbide Measuring Faces, Includes Fitted case '

Manufacturer: Starrett Brand: Starrett Model: 823MBZ

These micrometers are highly useful tools for internal linear measurements such as measuring cylinders, rings, setting calipers, comparing gauges and measuring parallel surfaces. The extension rods are made of steel tubing, light in weight, yet extremely rigid. Rods are approximately 9.5mm diameter to meet the requirements of mechanics who prefer this larger diameter. By removing the hardened and ground anvil ends (end caps) of the micrometer head, the rods may be attached to either or both ends of the micrometer as preferred. Each rod may be individually adjusted for wear by the hardened and ground anvil at the end. Tubular measuring rods are lightweight, yet extremely rigid. Rods are insulated, with the exception of 13mm and 25mm sizes also each rod is marked with length. Movement of screw: 13mm.

Manufacturer: Starrett Brand: Starrett Model: 124CZ

These are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings, measuring parallel surfaces, etc. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3"). Rod diameters are approximately 11/32". Each rod has individual length adjustment for the anvil by means of special wrenches furnished. Movement of screw: 1", Number of measuring rods: 4, Number of spacing collars: One 1" Two 2".

Manufacturer: Starrett Brand: Starrett Model: 687M-3Z

Starrett Countersink Gauges are offered in three different angles so that the gauge sets on the angular side of the countersink, as opposed to a chamfer gauge which sets on the top edge of the chamfer. This gauge directly reads the large diameter of the countersink in 0.002" or 0.05 mm increments. A set master ring is furnished with each gauge for calibration and setting. Press the button on top of the indicator to firmly depress the gauge head into the countersink. When the gauge is removed, the indicator reading is held in place until the reset button is activated.

Manufacturer: Starrett Brand: Starrett Model: 824K

The Starrett 824 series fixed range vernier inside micrometer has an adjustable sleeve and adjustable contacts on the thimble end help provide accurate measurements, and a vernier scale in inch units for making precise measurements. A knurled thimble helps provide secure grip, and the handles are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale is graduated to 0.001” and a knurled ring-type lock nut holds measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Tlegend Instrument® Brand: Tlegend Instrument Model: 335-02-920

The product usually takes 7--13 business days to arrive to your hand after your order is confirmed Product Description Measurement can be taken closer to the bottom Measurement can be taken closer to the bottom hole with an extension rod. Highly durable because of carbide-tipped contact points Ratchet stop. Technical Datas Protection level IP54. Type:8-10mm*0.001mm   Accuracy: 0.004mm NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 06140024

The Brown & Sharpe TESA IMICRO Capa LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm). An electrostatic capacitance linear encoder helps ensure repeatable, precise measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, fo...

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E2

Three points internal micrometer, 1.6-2", graduation 0002".

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA Etalon Intalometer 531 vernier inside micrometer has three-point contacts separated by 90, 135, and 135 degrees for measurement of the inside dimension (ID) of through holes, blind bores, or short centering shoulders, and a vernier scale in metric units for taking precise ID measurements. A knurled friction thimble helps provide quick adjustment capability.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.002”. The measuring contacts are made of hardened steel and the micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.