Indicators - Page 10

Manufacturer: NOGA Brand: Noga Model: PH4016

NOGA PH4016 Fine Adjustment Magnetic Base 220 lbs Holding Power 8.85" Arm Length

Manufacturer: tpactools Brand: TPACTOOLS

watch video demo https://www.youtube.com/watch?v=AMY6qniRyH8

Manufacturer: INDICOL Brand: INDICOL

Ideal for Bridgeports .Suitable for all popular indicators with 5/32" shank or dovetail. Mounts with single pressure screw directly on machine quill, bypassing the working tool.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2046S-09 Color: White

The dial indicators are Mitutoyo’s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.

Manufacturer: Hexagon Brand: Standard Gage Model: 01664002

The Standard Gage 01664002 Magnetic Stand has a fixed post and an articulating boom arm with a fixing bore diameter of 8 mm for holding dial gauges and comparators, and a magnetic base that adheres to metal surfaces with approximately 450 N of holding force and has a V-groove for mounting to cylindrical surfaces. The articulating arm has a ball swivel joint for positioning of gauges and comparators, and has a dovetail clamp. A switch allows the magnetic force to be turned on and off to aid positioning. The maximum extended length of the arm and post is 280 mm. The stand weighs 1.5 kg. Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.

Manufacturer: Hexagon Brand: Standard Gage Model: 01824004

The Standard Gage 01824004 dial test indicator has a 0.03" measuring range, 0.0005" graduations, a black face, carbide tip, and inch measurements, and is designed to measure surface variations in narrow or recessed areas. Jeweled bearings provide high sensitivity and accuracy, and reversible measuring direction. This dial test indicator has a narrow body for hard-to-reach areas, and 1.26" diameter face. It comes with a storage case and inspection report.Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Test indicator gauges, also called gages, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as small variations in flatness or height of an inspected workpiece, and permit measurement in narrow grooves or small bores. A test indicator gauge consists of a ball-tipped contact point on a levered arm, also called a measuring insert, which pivots from a hinge point. The reading indicates the degree of angular displacement of the arm. Test indicator gauges are commonly used in manufacturing, machining, and mechanical engineering. Standard test indicators measure the displacement of the arm perpendicular to the axis of the indicator. Dial and electronic indicators are very similar to test indicators, except that the axis of measurement is parallel to the axis of the indicator. Test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North ...

Manufacturer: Noga Brand: Noga

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2416S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2045SB Color: White

The dial indicators are Mitutoyo’s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White, Yellow

Material hardness: full-metal dial casing stainless steel fixing shank and plunger, hardened. Adjustable tolerance marks. M2,5 mounting thread for the measuring insert. Included in scope of supply: mounted insert with a 3.175mm diameter steel ball tip. Comes in plastic case or cardboard box. Identification number. Inspection report with a declaration of conformity. 1mm Revolution.