Indicators - Page 133

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2410S

Mitutoyo Dial Indicator, Graduation: .001", Range: .250", Dial face: 0-100, Back: Lug, Series: 2, Jeweled: No, Stem: 3/8"

Manufacturer: INSIZE Brand: INSIZE Model: 2398-03

BACK plunger Type dial Test indicator, 03 inch graduation 0005 inch.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-641-300-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Adds New In-Line Fine Adjustor to its Flexbar Universal Holder/Positioner. Flexbar Machine Corporation, innovators for over 30 years of the Flexbar instant Positioning-instant Locking Flexible Holding Arms, has introduced a new Top-End, in-Line Fine adjustor which holds All AGD Dial indicators as well as Test indicators With dove tail fittings. Flexbar Models are now available With either Single axis or Dual axis Top End Fine adjustors. The Fine adjustment assembly is actuated by a very smooth Micro-Screw thumb adjustor making the Flexbar ideal for High Precision indicating applications. Fine adjustor End holds AGD Dial indicators With 3/8" Stems (8mm bushing Adaptor included) and Test indicators With Dovetail. On/off Mag Base With V on Bottom: 2" x 2-1/4" x 2-5/8", 90lbs. pull. Model No. 18058, Flexbar in-Line Fine Adjustor, V-Mag Base, Single Axis

Manufacturer: ADJUSTOL Brand: ADJUSTOL

ADJUSTOL Adjustol Holders - Model: 178B

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2417S Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: INSIZE Brand: INSIZE Model: 2842-N1

Standard probe for 3D tester, 1.063 inch.

Manufacturer: HFS Brand: HFS

HFS 2 - 6" .500" DIGITAL INDICATOR BORE GAGE .0005" GAUGE

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2410S-10

Mitutoyo Dial Indicator, Graduation: .001", Range: .250", Dial face: 0-100, Back: Lug, Series: 2, Jeweled: Yes, Stem: 3/8"

Manufacturer: BETA TOOLS Brand: Beta Tools

Beta Utensili is a leading company in the production and sales of professional hand tools. The Ciceri family began producing tools in Northern Italy in the 1880s. Today, family owned Beta, or Beta Utensili is known for its direct involvement in Grand Prix racing, a relationship that dates back to the early 1970s. Research, development and quality. While nothing is perfect, we’re practicing. Accuracy, precision, rigor, quality, courage, style, consistency and innovation. To mould an idea, encourage it to its final outcome and after that better it still, Beta works daily, in close contact with end users, researching materials, design and constant improvement. Scrupulous control on each tool ensures its invariable quality.