Indicators - Page 135

Manufacturer: Fowler Brand: Fowler

FeaturesIndicatorRange: 0~.060"Graduation: .0005"Dial reading: 0-15-0Dial size: 1-1/2"Jeweled movement.Easy to read tilted dial.Revolution counter.Swivel arc: 210°Tungsten carbide point: .080"Magnetic BaseHolding power: 110 lbs.On/off switch.

Manufacturer: Mahr Brand: Mahr Federal Model: 4305200

Mahr Federal 800 S MarTest 4305200, 0.01mm x ±0.4mm Standard Test Indicator, 0-40-0, 1.1" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: INSIZE Brand: INSIZE Model: 2112-10E

Electronic indicator, 5 inch 12 7mm resolution 0005 inch 0/01mm.

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 2016005

Approximate  57mm diameter with soft-yellow tint. Approximate 2.250in diameter with soft-green tint. These indicators are normally furnished with continuous dial (with R. C. ) or + on right balance dial (w/o R. C. ), lug back, .18" by .250" long contact and tolerance hands.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1670SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus, 0.3 mm carbide ball, stepped carbide shaft, 3.0 mm diameter x 5.0 mm long stainless steel base, 18.0 mm overall stylus length. Major shaft diameter is 1.0 mm. Intermediate shaft diameter is 0.50 mm. Minor shaft diameter is 0.20 mm. Stylus weight is 0.33 gram.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2923S-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Flexbar Brand: Flexbar

Premium Quality Precision Dial indicators - AGD 2. Made in Japan Features Extremely Smooth Precision Gears inch and Metric Models. Other Features: Contact Point Made of tool steel, Hardened ground and chrome plated. Stem Made of stainless steel

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 1803SB-10 Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Yellow

Precision dial gauge includes 0.01mm dial readout / 57 or 58mm dial diameter. Range of indication maximum plunger travel: 10.5mm. Mm or in/revolution: 1mm. Circular scale: 0 - 50 - 0. Dial locking knob. With or without shockproof mechanism. Special features: adjustable tolerance marks. M2.5 mounting thread for the measuring insert. Included in scope of supply: 3mm diameter ball tip, already mounted. Comes in cardboard box. Identification number. Inspection report with a declaration of conformity.