|
|
-
4.8 of 5.0 with 45 Reviews
SALE PRICE: $169.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Layout-Grinding and Inspection 1-2-3 Blocks supplied in Matched pair. Made of Hardened steel, ground on All six sides. Has 1/2" Dia. hole through Center of 2" x 3" Face. Square to .0001" per inch. Model No. 16163, Matched Set of 2 Blocks, Parallel Accuracy .0001" to .0002".
-
4.8 of 5.0 with 7 Reviews
SALE PRICE: $170.00 1% OFF
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: 2014699
Manufacturer: Mahr Federal
Brand: Mahr Federal
Model: 2014699
Mahr Federal AGD 2, 2014699 Dial Indicator 0.50" RANGE X.001", 28IQN Lug back, Jeweled is used to measure dimensional deviations. It has a measurement range of 0 to.500", graduations of 0.001", an accuracy of ±0.001", and a range per revolution of 0.100". The dial is light green to be easy on the eyes and inch recognition with a contrasting hand for readability. This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. The dial is continuous with a reading of 0-100, for direct readings.
-
4.8 of 5.0 with 31 Reviews
SALE PRICE: $177.00
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 543-782
Manufacturer: Mitutoyo America Corporation
Brand: Mitutoyo
Model: 543-782
Mitutoyo Digimatic Indicator ID-S 543-782, .5 In/12.7mm, .0005 In/0.01mm, 8mm stem, Lug Back, With SPC Data Output.
-
4.8 of 5.0 with 23 Reviews
SALE PRICE: $181.95 16% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-907
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-907
Color: White
Mitutoyo Horizontal Test Indicator, Graduations: .0005", Range: .030", Dial Face: 0-15-0, Includes: Test indicator, .079" carbide contact point, 3/8" stem, clamp nut, mini magnetic stand.
-
4.8 of 5.0 with 1 Reviews
SALE PRICE: $194.99 1% OFF
Manufacturer: Ridgid
Brand: Ridgid
Manufacturer: Ridgid
Brand: Ridgid
|
The RIDGID 14 in. Abrasive Cut-Off Machine features a 10 ft. cord for an extended reach on the jobsite. This cut-off machine has a large cutting capacity and can accommodate full bundles of metal studs. The 15-Amp, high-torque motor is designed for cutting through rebar, bar stock, angle iron and complete bundles of metal studs. Includes: (1) Reconditioned Ridgid ZRR4142 15 Amp 14 in. Cut-Off Machine (1) 14 in. Abrasive Wheel (1) Arbor Wrench (1) Vise Clamp (3) Mounting Screws (3) Flat Washers Operator's Manual This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to fully functional condition. Some products may contain cosmetic blemishes, scrapes, scratches and dirt but should work like new. If this is a gift, please keep this in mind. The factory provides a 1 year warranty available through a nationwide network of service centers. Purchase receipt is required.
-
4.8 of 5.0 with 42 Reviews
SALE PRICE: $201.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-453
Color: White
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 513-453
Color: White
Measuring force: 0.3N or less, Length: 15mm, Mass: 50 (g). It is Anti-magnet and Jeweled bearing type. Basic Set includes Indicator, Knurled Clamp Ring, 3/8" Diameter Stem (part number 902805) and .079" Diameter Carbide Contact Point.
-
4.8 of 5.0 with 27 Reviews
SALE PRICE: $260.10 1% OFF
Manufacturer: INSIZE
Brand: INSIZE
Model: 2113-101E
Manufacturer: INSIZE
Brand: INSIZE
Model: 2113-101E
No Auto power off electronic indicator, 5 inch 12 7mm resolution 00005 inch 0/001mm.
-
4.8 of 5.0 with 26 Reviews
SALE PRICE: $331.00
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4336030
Color: Black
Manufacturer: Mahr Federal Inc.
Brand: Mahr Federal
Model: 4336030
Color: Black
|
The Mahr Federal 1075R REFERENCE Digital electronic indicator gauge, is a digital indicator for measuring short, linear distances in machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm) and a resolution of 0.0005"/0.01mm. The Large crisp LCD displays measurements in inches and metric units. The Digital Indicators 1075 R are equipped with the innovative Reference-System. The zero position only has to be set one time: once it is set, the zero remains stored for all further measurements. Therefore, when the indicator is switched ON or the measuring spindle is moved the indicator is immediately ready for measurement. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB HubThe Digital Indicator 1087 R is equipped with a LOCK function. With this key lock the zero position is secured and operating error is avoided. The face of the indicator is fixed for easy reading in bench or fixture gages. This unit has a 8mm diameter stem and a 2.5m contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. The 1075R is Ingress Protection certified IP52 for protection dirt and dripping water. Additional functions for this indicator include ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (for entering a numerical value), DATA (data transmission with a data connection cable), LOCK-Function: Individual buttons can be locked. The measuring force is 1 Newton (N) or less. It has a battery life of nearly 3 years of normal use. This unit comes with a CR 2032 battery.
-
4.8 of 5.0 with 24 Reviews
SALE PRICE: $342.53 6% OFF
Manufacturer: Starrett
Brand: Starrett
Model: F2740-3
Manufacturer: Starrett
Brand: Starrett
Model: F2740-3
|
The Starrett F2740-3 Wisdom Plus Electronic Indicator has four user-selectable resolutions with a maximum resolution of 0.0005†(0.01 mm), accuracy of + or - 2 resolutions, and a total measurement range of 0†- 2†(0 - 50 mm). The digital display has a sealed housing with a glass scale design, minimum, maximum, and last read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The display flashes when user-defined tolerances are exceeded, and the total indicator reading (TIR) capability displays the absolute difference between the highest and lowest readings. The 5-3/4†(146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4†(6-mm) diameter hole, and an output jack that allows for data transmission to PC compatible RS-232C (serial port) supported devices. Manufactured to American Gage Design (AGD) standards, the indicator can be powered from any of three sources: 110V AC adaptor, rechargeable zinc-air batteries, or through the data port. An auto-off feature turns the indicator off after 10 minutes of nonuse. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to ...
-
4.8 of 5.0 with 41 Reviews
SALE PRICE: $346.50 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-796BCAL
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 543-796BCAL
|
The calibrated Mitutoyo 543-796BCAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for accurate measurements. This model is Ingress Protection certified IP53 for protection against dust and spraying water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with flat backData outputYesDimensions103.9 ...
|
|