Indicators - Page 50

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2904S

Mitutoyo Dial Indicator, Graduation: .001", Range: 1", Dial face: 100-0, Back: Lug, Series: 2, Jeweled: No, Stem: 3/8", Comment: Reverse Reading

Manufacturer: Q-Mark Manufacturing Inc. Brand: Qmark

M5 stylus, 0.6 mm diameter ruby ball, stepped carbide stem, 11.0 mm diameter x 10.0 mm long stainless steel base. Minor stem diameter is 0.43 mm, major stem diameter is 1.0 mm.  Overall stylus length is 20.0 mm.  Stylus weight is 5.62 grams.

Manufacturer: INSIZE Brand: INSIZE Model: 2307-205

Dial indicator, 2", graduation 0005".

Manufacturer: GOODSON Brand: Goodson

Mounting Kit & Dial Indicator

Manufacturer: Dowling Miner Magnetics

Manufacturer: Flexbar Brand: Flexbar

The Original Made in U.S.A. Flexbar. Instant Positioning - instant Locking Universal Holder/Positioners for All AGD indicators and Electronic Sensors (Lug Backs Too!). The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Model No. 18028, Flexbar 16" Height, With Magnet Base With Fine adjustor. Magnet Pull is 65 lbs. On/off.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-860-001-0

The Fowler 54-860 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. An ABS (acrylonitrile butadiene styrene) housing protects electronic components against impact and provides electrical insulation. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring range0 to 1"/0 to 25mmResolution0.00005"/0.001mmAccuracy0.00016"/0.004mmThimble styleFrictionData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manu...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2506SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 2506SB Color: White

The Mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0.375" stem diameter, and inch measurements. The indicator has a 0.375" diameter stem, a #4-48 UNF contact point thread mount, and is used to measure surface variations in fractional inches. The choice of black or white dial and a contrasting hand help make measurements easy to read. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt. Lug back dial test indicators usually come with the lug installed horizontally. The back on most indicators can be rotated to the vertical position. It has a stem design that provides a long clamping range, no through screw-holes on the frame for dust- and water resistance, and an involute curved lifting lever that provides smooth movement of spindle and dovetail joint for a tool-less connection. This dial indicator meets ANSI standards, Japanese Industrial Standard (JIS) B7503-1997, and American Gage Design (AGD) standards for face and thread size, and bezel and stem diameter. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, a revolution counter to measure overall change, waterproof, dustproof, shockproof, a white or black face, and reverse reading for depth or bore gage measurement.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear ...

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus with 0.5 mm carbide ball. Stainless steel base, 3 mm diameter x 5 mm long. Stepped carbide shaft with 1.0 mm major diameter, 0.60 mm intermediate diameter, and 0.30 mm minor diameter. Overall stylus length is 20.0 mm. Stylus weight is 0.33 gram.